Dust, chemicals, and other particles in the air create hazards for workers, including

the risk of lung damage, sickness, disease, or even death! But these hazards can be eliminated

with the use of a properly-fitting respirator, like this one. My name is Amanda, and I work

in the administration and video production departments. Id like to welcome you back to

another episode of Gear up with Greggs, where were going to talk about 3Ms Respiratory Protection.

Respiratory protection isn't just fashionable, Okay, so maybe its not even fashionable, but

this type of protective equipment is required when airborne hazards can't be eliminated or

sufficiently reduced to a safe level. After all, a face mask doesnt just protect your

lungs from exposure to harmful elements, it also protects your brain and central nervous system.

Depending on the type of face piece, filters, or cartridges that are used,

your level of protection can vary.

For example, this bright pink filter may not seem like much, but it provides respiratory

protection against exposure to lead, asbestos, cadmium, and arsenic. With a half face piece,

like this one, the filter can block up to 10 times the Permissible Exposure Limit (or PEL)

With a full face piece, like this, the filter can block up to 50 times the PEL!

as long as the mask fits properly, a P100 filter like this can block 99.97% of particles that

are .3 microns or larger.

Now, a micron is short for micrometer, which means its one millionth of a meter; so were

talking small. Itty bitty. Miniscule. For reference, the dot from a simple pencil point

is roughly 615 microns. Most of the debris kicked up in the average work environment

is between 100 and 300 microns, and this is the stuff that just falls to the floor.

It's the stuff around 10 microns that we start to breathe in. It gets lodged in our nasal

passages and at the top of our lungs, but our bodies natural instinct expels it through coughing.

The smaller stuff, around 2.5 microns or less, is the most dangerous. It gets down

into the bottom of our lungs, and while some of it gets dissolved into the blood stream

and filtered out; the stuff that stays there can lead to allergies, lung disease, and even cancer.

So, to prevent inhaling these dangerous particles, we turn to respirators. There are several

key factors that need to be considered when choosing the right type of respiratory protection

for your application. These factors will help you choose the best respirator for your jobsite

and for your lungs.

First, you need to consider what contaminant or contaminants you're dealing with.

Is it dust, mist, fume, gas, or vapour? Is there one contaminant, or many? Sometimes the contaminant

may have more than one form; for example, spray-painting produces both paint mist and

solvent vapour, while welding produces both metal fumes and gases.

Knowing the type of contaminant will help you determine what filter and coverage you need.

Once you've determined the contamination type and volume,

you can narrow down your choice of face pieces.

A full-face respirator is ideal for working with chemicals, vapors,

or environments where a higher level of protection, especially for your eyes, is required.

And, for longer-use, the full-face respirator is much more comfortable than the half-mask.

The 7800 series has extra-large inhalation and exhalation valves,

helping you breathe easy no matter what filtration type you have strapped to it.

The six adjustable straps also mean that you get the best fit possible.

However, if you're looking for something with a bit more flexibility,

turn to the 7500 or 6500QL series.

These half-face respirators have a drop-down feature, which means they're designed to allow easy removal,

and re-application of the respirator when you're moving in and out of contaminated areas.

Now, if you're working in a hot environment and are trying to keep cool,

you're going to want a respirator with the 3M Cool Flow Technology.

This cool flow valve is designed for easy exhalation and for cool, dry comfort.

They're even designed for downward exhalation,

so the hot breath from your lungs moves away from your body as quickly as possible.

The 6000 half-face respirator is the most economic option,

without all the bells and whistles of the other respirators.

This mask is low-maintenance, simple to handle, and extremely lightweight.

So now that you know what kind of face piece you'll need,

let's determine the best filter for the task at hand.

Particulate respirators are the simplest, least expensive respirator type.

However, they also offer less protection than others, since they only protect against particles, such as dust.

They do not protect against chemicals, gases, or vapors and are intended only for low-level hazards.

Chemical cartridges, when used in combination with an appropriate mask, are known as air-purifying respirators,

because they filter or clean chemical gases out of the air as you breathe.

These cartridges are color-coded to help you identify the best cartridge for the job.

For instance, this black cartridge provides protection against certain organic vapours,

while this white one provides protection against chlorine, hydrogen chloride, sulfur dioxide,

chlorine dioxide, and hydrogen sulfide.

But the cartridges only provide protection against gases, fumes, or vapours, not particles,

so some of these may also work in conjunction with a particulate filter to keep you and your lungs safe.

Sometimes, you'll need an adapter, to fit the filter on your cartridge.

After each days use, the respirator should be cleaned and inspected.

Check the face piece and valves for cracks, tears, and dirt.

Make sure the head straps are intact and have good elasticity.

Examine all plastic parts for signs of cracking or fatigue.

Remove the exhalation valve cover and examine the valve and valve seat for signs of

dirt, distortion, cracking or tearing.

Inspect the lens of any full-face respirator for any damage that may impair

its performance or vision. If your valves or gaskets are damaged, don't worry,

here at Greggs we've got you covered.

For cleaning your respirator, the 3M Respirator Cleaning Wipes can be used between each use,

so long as the respirator is only used by one person,

but this shouldn't be the only cleaning method in place.

At the end of each day, you should remove the cartridges and filters,

clean the faceplate in warm cleaning solution, with the water under 50ºC

and scrub with a soft brush until clean.

You can add a neutral detergent if necessary, but be careful!

Dont use cleaners containing lanolin or other oils, which could damage your respirator.

Disinfect the face piece by soaking it in a solution of a suitable disinfectant or diluted,

household bleach diluted to 30 mL for every 7.5 L of water.

Rinse in fresh, warm water

and air dry in a clean, non-contaminated area. Inspect the components prior to reassembly

and store the clean respirator away from contaminated areas when not in use.

Now, there are a lot more factors out there that may affect the type of respirator thats

best suited for your application. To be 100% certain you're getting the right fit, speak

with your employer, who should be providing you with the right information for your safety.

Or, if you have any questions, please dont hesitate to call us and speak to one of our

friendly staff. Or you can visit our website at greggdistributors.ca. And hey, if you liked

this video, be sure to hit that like button, or subscribe for more great content.

Again, I'm Amanda and thank you for watching another episode of Gear up with Greggs.