hi guys and welcome back to SITENG in today's  video i'm going to show you the capping beam  
hi guys and welcome back to SITENG in today's  video i'm going to show you the capping beam  

and you're going to find out how to  construct the capping step by step  
and you're going to find out how to  construct the capping step by step  

as you can see works carries on it's very busy  now all capping beam is finished but i'm going  
as you can see works carries on it's very busy  now all capping beam is finished but i'm going  

gonna show you as I said step by step all the  works to captain beam construction so let's go  
gonna show you as I said step by step all the  works to captain beam construction so let's go  

guys so this is first step when doing the  cupping beam after the pilings finished we  
guys so this is first step when doing the  cupping beam after the pilings finished we  

actually after seven days you can start uh  uncovering the pies but this this we're waiting  
actually after seven days you can start uh  uncovering the pies but this this we're waiting  

here much longer anyway so you see i got the laser  here it's actually part of the beam already done  
here much longer anyway so you see i got the laser  here it's actually part of the beam already done  

but uh it doesn't really matter you're gonna be  doing the same steps so first we're getting to  
but uh it doesn't really matter you're gonna be  doing the same steps so first we're getting to  

the to the dig level which is uh i set this this  case 75 mil below the blinding level and yeah  
the to the dig level which is uh i set this this  case 75 mil below the blinding level and yeah  

we're going to be cropping the pulse i'm going  to show you this later and uh of course after  
we're going to be cropping the pulse i'm going  to show you this later and uh of course after  

this we have to test the piloting credit integrity  testing and uh i'm going to show you step by step  
this we have to test the piloting credit integrity  testing and uh i'm going to show you step by step  

anyway yeah so but this is step number one i would  say but before this i'm going to show you what I  
anyway yeah so but this is step number one i would  say but before this i'm going to show you what I  

what i do and this is a very good practice if you  do this as well on site uh just give me a second  
what i do and this is a very good practice if you  do this as well on site uh just give me a second  

so you can see there on that hoarding i mark the  grid lines a d a c a b as they go and i actually  
so you can see there on that hoarding i mark the  grid lines a d a c a b as they go and i actually  

might on the holding in the stab institute if  i step in the soffit of the beam i'll make a  
might on the holding in the stab institute if  i step in the soffit of the beam i'll make a  

small table there as well and uh i make on the  horning i put the nails there as well for the  
small table there as well and uh i make on the  horning i put the nails there as well for the  

for the dig level two meters and on that table i  got everything so whoever comes he could actually  
for the dig level two meters and on that table i  got everything so whoever comes he could actually  

use it but it is good for yourself as well  and the grid line is very important you just  
use it but it is good for yourself as well  and the grid line is very important you just  

you know where you are where you're pouring  where you're digging even from from from far  
you know where you are where you're pouring  where you're digging even from from from far  

so yeah that would i would start from this  let's say that would be like coordination of  
so yeah that would i would start from this  let's say that would be like coordination of  

your side really as well that's very useful  that's going to be very useful for you  
your side really as well that's very useful  that's going to be very useful for you  

and yeah that's it yeah let's go to the next step  just to quickly show you i just uh set a level  
and yeah that's it yeah let's go to the next step  just to quickly show you i just uh set a level  

for the uh the cut off level actually that guy's  going to be cropping first using this machine here
for the uh the cut off level actually that guy's  going to be cropping first using this machine here

and it goes to the dumper goes away on the lorry  and that's how it works yeah so all them piles are  
and it goes to the dumper goes away on the lorry  and that's how it works yeah so all them piles are  

going to be cropped first and then they're  going to be cut with a with a blade to the  
going to be cropped first and then they're  going to be cut with a with a blade to the  

proper level and then broken and down in the  middle as you cannot go too deep with a blade  
proper level and then broken and down in the  middle as you cannot go too deep with a blade  

but you could uh actually cut the  steel so yeah that's how it works  
but you could uh actually cut the  steel so yeah that's how it works  

next stage uh probably gonna be pile testing  and blinding and i'll show you everything
next stage uh probably gonna be pile testing  and blinding and i'll show you everything

okay i show this
okay i show this

so the next step guys uh it's the  blinding you can see the laser on the  
so the next step guys uh it's the  blinding you can see the laser on the  

back and you can see the grid lines  as well as as i showed you before  
back and you can see the grid lines  as well as as i showed you before  

so the laser is set and the blinding gonna be our  legs level this is maybe not the best uh picture  
so the laser is set and the blinding gonna be our  legs level this is maybe not the best uh picture  

showing the blinding as the finish uh will be  better before you start uh marking the lines  
showing the blinding as the finish uh will be  better before you start uh marking the lines  

but that's it so that's the blinding and  then we're gonna do the lines so on this  
but that's it so that's the blinding and  then we're gonna do the lines so on this  

picture you can actually see the one of the  healthy nails i'm using the concrete nails  
picture you can actually see the one of the  healthy nails i'm using the concrete nails  

when marking the lines as uh using the spray you  can you can lose your line when it's raining but  
when marking the lines as uh using the spray you  can you can lose your line when it's raining but  

the nail is gonna stay always so you can  you can redo your line you can do it again  
the nail is gonna stay always so you can  you can redo your line you can do it again  

and the guys can use it they know where the line  is so you can see the line is marked there and as  
and the guys can use it they know where the line  is so you can see the line is marked there and as  

fixers using it to fix their steel to the line  and that's going to be line for the chip is for  
fixers using it to fix their steel to the line  and that's going to be line for the chip is for  

the shutter you see on this picture there's  a shutter set to the line and yeah that'll  
the shutter you see on this picture there's  a shutter set to the line and yeah that'll  

be all for the for the marking the lines on the  blinding so the next step in cupping beam i was  
be all for the for the marking the lines on the  blinding so the next step in cupping beam i was  

just marking the level you see the starter bars  there for the slop so i was marking the soffit i  
just marking the level you see the starter bars  there for the slop so i was marking the soffit i  

don't know if you can see here using the tip-ex  the white mark that's the soffit of the slab  
don't know if you can see here using the tip-ex  the white mark that's the soffit of the slab  

and then yeah the next thing i'm just going to  do the pre-inspection i'm going to go with you  
and then yeah the next thing i'm just going to  do the pre-inspection i'm going to go with you  

around the beam and i'll show you but all the rest  we're going to i'm going to show you uh in the  
around the beam and i'll show you but all the rest  we're going to i'm going to show you uh in the  

construction drawing series uh the draw the video  corresponding this one so you can see the still  
construction drawing series uh the draw the video  corresponding this one so you can see the still  

here the columns here i marked the center of the  columns that's what let's uh want it these guys  
here the columns here i marked the center of the  columns that's what let's uh want it these guys  

you can see that's a lightning protection cable  that's the connection here let me show you now  
you can see that's a lightning protection cable  that's the connection here let me show you now  

two clamps connecting the cable and i actually do  it myself i want to make sure this is done right  
two clamps connecting the cable and i actually do  it myself i want to make sure this is done right  

obviously if i got time for it but  i'll try to do these things myself  
obviously if i got time for it but  i'll try to do these things myself  

and then yeah that's another one i just
and then yeah that's another one i just

tied it into the rebar so you're gonna see the  detail on the construction drawing video covering  
tied it into the rebar so you're gonna see the  detail on the construction drawing video covering  

the captain beam and yeah so that's another thing  you need to remember when doing the capping beam
the captain beam and yeah so that's another thing  you need to remember when doing the capping beam

so this is guys after inspection client  is happy with the steel i'm happy too  
so this is guys after inspection client  is happy with the steel i'm happy too  

we pour in the concrete we got concrete which  is already slammed now and it's quite alright  
we pour in the concrete we got concrete which  is already slammed now and it's quite alright  

okay fixtures are working here that's my line  
okay fixtures are working here that's my line  

i marked the back line to be safe in front  really but i'm checking the front as well
i marked the back line to be safe in front  really but i'm checking the front as well

in and out in and out
in and out in and out

okay next bucket oh be coming of my starter bars  that's what sometimes happen as well you just  
okay next bucket oh be coming of my starter bars  that's what sometimes happen as well you just  

someone can move the column  and that's the problem later
someone can move the column  and that's the problem later

oh we got a good driver here and he's watching  
oh we got a good driver here and he's watching  

you see guys are putting now in the  beam uh just the shoes for the barriers
you see guys are putting now in the  beam uh just the shoes for the barriers

this one is empty now the driver is cleaning  his i'll show you now yeah he's shoot
this one is empty now the driver is cleaning  his i'll show you now yeah he's shoot

this water is not going into the beam you have  to get rid of it and then we're waiting for the  
this water is not going into the beam you have  to get rid of it and then we're waiting for the  

next lorry and carry on so on and on so that's  how the that's how the works with captain beam  
next lorry and carry on so on and on so that's  how the that's how the works with captain beam  

looking really so just as a summary you see  the beam is full we got a nice finish here  
looking really so just as a summary you see  the beam is full we got a nice finish here  

uh we got something like this that gonna be  watched later just to uncover maybe the aggregate  
uh we got something like this that gonna be  watched later just to uncover maybe the aggregate  

just when connecting with the slab later but  that's going to be other contractor you see the  
just when connecting with the slab later but  that's going to be other contractor you see the  

castings here that's going to be taken out bank  and we're going to put the barriers like that  
castings here that's going to be taken out bank  and we're going to put the barriers like that  

inside i just quickly show you this so the  barriers here can be saved and after seven days  
inside i just quickly show you this so the  barriers here can be saved and after seven days  

i'm going to show you the results for the cubes  and we can start digging here for the basement  
i'm going to show you the results for the cubes  and we can start digging here for the basement  

so that would be all for the cupping  beam meme see you on the next video
so that would be all for the cupping  beam meme see you on the next video