When you plug in an electric device, it’s easy not to even consider where the electricity
actually comes from.
The simple answer is a power generating station, also known as a power plant, usually someplace
far away.
But the reality is much more complicated than that.
Generation is only the first of many steps our power takes on its nearly instantaneous
journey from production to consumption.
The behaviour of electricity doesn’t always follow our intuitions, which means the challenges
associated with constructing, operating, and maintaining the power grid are often complicated
and sometimes unexpected.
Many of those challenges are overcome at facility which, at first glance, often looks like a
chaotic and dangerous mess of wires and equipment, but which actually serves a number of essential
roles in our electrical grid, the substation.
I’m Grady and this is Public Works, my video series on infrastructure and the humanmade
world around us.
This video is sponsored by NordVPN.
Visit NordVPN.com/practicalengineering to get 75% off a 3-year plan. More on that later.
As simple as it is to imagine, the power grid isn’t just an interconnected series of wires
to which all power producers and users collectively connect.
In reality, the electricity normally makes its way through a series of discrete steps
on the grid normally divided into three parts: generation, or production of electricity;
transmission, or moving that electricity from centralized plants to populated areas; and
distribution, or delivering the electricity to every individual customer.
If you consider the power grid a gigantic machine (and many do), substations are the
linkages that connect the various components together.
One of the cool parts about our electrical infrastructure is that most of it is out in
the open so anyone can have a look.
I’m somewhat of an infrastructure tourist, a regular beholder of the constructed environment,
and my goal is for you too to be able to mentally untangle this maze of modern electrical engineering
so that the next time you feast your eyes on a substation, you’ll be able to appreciate
it as much as I do.
Originally named for smaller power plants that were converted for other purposes, “substation”
is now a general term for a facility that can serve a wide variety of critical roles
on the power grid.
Those roles depend on which parts of the electrical grid are being connected together and the
types, number, and reliability requirements of the eventual customers downstream.
And the first and often simplest of these roles is switching.
The general layout of a substation consists of some number of electric lines (called conductors
if you want to fit in with the electrical engineers) coming into the facility.
These high voltage conductors connect to a series of some or many pieces of equipment
before heading out to their next step in the power grid.
As a junction point in the grid, a substation often serves as the termination of many individual
power lines.
This creates redundancy, making sure that the substation stays energized even if one
transmission lines goes down.
But, it also creates complexity.
The connections to these various devices are called buses, often rigid, overhead conductors
that run along the entire substation.
The arrangement of the bus is a critical part of the design of any substation because it
can have a major impact on the overall reliability.
Like all equipment, substations occasionally have malfunctions or things that simply require
regular maintenance.
To avoid shutting down the entire substation, we need switches that can isolate equipment,
transfer load, and control the flow of electricity along the bus.
This may seem obvious, but turning on and off high voltage lines isn’t as simple as
flipping a light switch.
At high voltages, even air can act like a conductor, which means even if you create
a break in a line, electricity can continue flowing in a phenomenon known as an arc.
Not only does arcing defeat the purpose of a switch, it is incredibly dangerous and damaging
to equipment.
So, switching in a substation is a carefully-controlled procedure with specially-designed equipment
to handle high voltages.
Disconnect switches are often just called switchgear in addition to the equipment that
serves another important role in a substation: protection.
I mentioned earlier that much of our electrical infrastructure is exposed and out in the open.
That’s nice for people like me who enjoy having a look, but it also means being vulnerable
to an endless number of things that can go wrong.
From lightning strikes to rogue tree limbs, windstorms to squirrels, grid operators contend
with so many threats to their infrastructure on a day by day basis.
When something causes a short circuit on the power grid, also called a fault, it can severely
damage power lines and other equipment.
Not only that, because of the overwhelming complexity of the power grid, faults can and
do cascade in unexpected and sometimes uncontrollable ways, leaving huge populations without power
for hours or days.
Many of the ways we protect equipment from faults are handled at a substation.
One of the most common types of electrical fault is a short circuit to ground.
This type of fault creates a low-resistance path for current to flow and leads to an overload
of power lines and equipment.
The simplest way to protect against this type of fault is with a fuse, a device that physically
burns out at a certain current threshold.
Fuses are dead simple and don’t require much maintenance, but they have some disadvantage
too.
They’re one-time use and can’t be used to interrupt current for other types of faults.
On the other hand, circuit breakers are a class of devices that serve similar roles
as fuses, but provide more sophistication for dealing with a wide variety of faults.
Like disconnect switches, circuit breakers need to be carefully designed to interrupt
huge voltages and currents without damage.
As soon as contacts within a circuit breaker are moved apart from one another, an electrical
arc forms.
This arc needs to be extinguished as quickly as possible to prevent damage to the breaker
or unsafe conditions for workers.
Extinguishing the arc is accomplished by a material called a dielectric that doesn’t
conduct electricity.
For lower voltages, the circuit breakers can be located in a sealed container under vacuum
to avoid electricity conducting in the air between the contacts.
For higher voltage, breakers are often submerged in tanks filled with non-conductive oil or
dense dielectric gas.
These breakers give grid operators more control about how and when current gets interrupted.
Not every fault is the same and sometimes operators even know about a disturbance ahead
of time and can trigger breakers early to prevent cascading failures.
Many faults are temporary like lightning strikes or swaying tree branches.
A special kind of circuit breaker called a recloser can interrupt current for a short
period of time and re-energize the line to test if the fault has cleared.
Re-closers usually trip and reclose a few times, depending on their programming, before
deciding that a fault is permanent and locking out.
If electricity demand on the grid gets so high that it can’t be met by the utility,
substations may also be used to shed load.
Rolling blackouts are used to lower the total electrical demand to avoid bigger failures
on the grid.
One of the most important parts of the power grid is that different segments flow at different
voltages.
Voltage is a measure of electrical potential, somewhat equivalent to the pressure of a fluid
in a pipe.
At large power plants, electricity is produced at a somewhat low voltage of around 10-30
kilovolts or kV.
From there, the voltage is increased much higher using transformers so that it can travel
along transmission lines.
Using a higher voltage reduces the losses along the way, making them more efficient
but also much more dangerous.
This is why overhead transmission lines are so tall - to keep them out of the way of trees
and human activities.
But, when transmission lines reach the populated areas which they serve, it’s not feasible
to keep them so high in the air.
So, prior to distribution, the voltage of the grid needs to be brought back down, again
using transformers located within a substation.
A transformer is an extremely simple device that relies on the alternating current of
the grid to function.
It consists of two adjacent coils of wire.
As the voltage in one coil changes, it creates a magnetic field.
This field couples with the other coil, inducing a voltage.
The incredible part of a transformer has to do with the number of loops in each coil.
The induced voltage will be proportional to the ratio of loops.
For example, if the transmission side of a transformer has 1000 loops while the distribution
side has 100, the voltage on the distribution side will be 10 times less.
This simple but incredible fact makes it possible for us to step up or down voltage as necessary
to balance the safety and efficiency along each part of the power grid.
The simplicity of transformers is great in a lot of ways, but it also means that it can
be difficult to make fine adjustments to the power leaving the substation.
Because of this, many many substations include equipment for monitoring and controlling the
power on the grid.
Instrument transformers are small transformers used to measure the voltage or current on
the grid or provide power to system monitoring devices.
Depending on varying transmission and distribution losses, the voltage on the grid can swing
outside an acceptable range.
Regulators are devices with multiple taps that can make small adjustments - up or down
- to the distribution voltage on feeder lines leaving the substation toward customers.
If you look closely you can sometimes see the regulator dial indicating the tap position.
All that different equipment requires lots of maintenance.
The final and most important role of a substation is that it be safe for electricians and linemen
to inspect, repair, and replace equipment.
Substations are usually the only locations where extra-high voltage power lines get close
to the ground, so safety is absolutely critical.
The buswork running along the substation is protected from short-circuit by large insulators
to avoid arcs to ground.
Even the connections into each piece of equipment are done through a device called a bushing
which maintains a safe distance between energized lines and the grounded metal housings.
Some substations have large concrete walls to serve as fire barriers between equipment.
All substations are built with a grid of grounding rods and conductors buried below the surface.
In the event of a fault, the substation needs to be able to sink lots of current into the
ground to trip the breakers as quickly as possible.
This grounding grid also makes sure that the entire substation and all its equipment are
kept at the same voltage level, called an equipotential, so that touching any piece
of equipment doesn’t create a flow of electricity through a person.
Finally, substations are surrounded by large fences and warning signs to make absolutely
sure that any wayward citizens know to stay out.
In many ways, the grid is a one-size-fits-all system - a gigantic machine to which we all
connect spinning in perfect synchrony across, in some cases, an entire continent.
On the other hand, our electricity needs, including when we need it, how much we need,
and how reliably it should be delivered vary widely.
Power requirements are vastly different between a sensitive research facility and a suburban
residential neighborhood, between a military base and country club golf course, and between
a steel mill and a bowling alley.
Likewise, every electrical substation is customized to meet the needs of the infrastructure it
links together.
As the grid gets smarter, as demand patterns change, and as we (hopefully!) continue to
replace fossil fuel generation with sources of renewable energy to curb global warming,
managing our electrical infrastructure will only get more challenging.
So, substations will continue to play a critical role in controlling and protecting the power
grid.
Just like electricity on the grid, internet traffic goes through several steps along the
way.
As I sat in an airport writing this video, I was definitely wondering if one of those
steps might be a hacker or organization recording my traffic.
Unfortunately, people have come up with lots of ways to intercept web traffic and use that
information nefariously, which is why I use NordVPN.
Some web traffic is already encrypted, but I don’t want to keep track of whatever protocol
each website or service happens to be using.
NordVPN makes it super simple to make absolutely sure I’m protected.
I just load the app, click connect and it’s done.
There’s no limit on bandwidth, and it works on all my devices.
I don’t leave my house unlocked when I’m away, even though I know the likelihood of
someone trying to break in is low.
And even though there’s probably not someone sniffing packets at my local coffee shop,
I don’t use their wifi (or any other public network) without using NordVPN.
It’s just not worth the risk.
If your privacy and security online is important to you, they’re offering an awesome discount
to fans of the channel.
Visit NordVPN.com/practicalengineering or click the link in the description below to
get 75% off a 3-year plan.
Use promo code PracticalEngineering to get an extra month for free.
Thank you for watching, and let me know what you think!