This video is brought to you by Brilliant.
Because of the intermittency of renewable energy sources like wind and solar,
storing large amounts of power is a necessity for the decarbonisation of our energy system.
However, we still don't have enough batteries to compensate for renewable energy slumps across
the planet. When thinking about the biggest utility-scale energy storage installations,
a huge cylindrical lithium-ion battery-powered light bulb may go off in your head. But what if
I told you the world’s largest battery taps into water rather than lithium? Can an old technology,
even one still learning new tricks, be the answer? Let’s see if we can come to a decision on this.
I’m Matt Ferrell … welcome to Undecided.
Not too long ago, one of my Patrons asked me about the current progress here in the US towards
building out enough large-scale lithium ion battery systems to cover our energy storage needs.
I knew that Tesla has been ramping up Megapack installations, but their efforts alone are far
from meeting American storage demand … let alone the global one. Another thing to consider is that
most lithium ion facilities are for real-time peak saving rather than for long-term storage. Many of
the longer-term storage technologies I’ve covered on this channel are still in the pilot phase.
When I started to dive into the largest battery systems on the planet, I was surprised by what I
found. I was aware that pumped hydro storage made up the largest energy storage facilities today,
but what I didn’t know was by how much and they’re still developing.
This old technology is still making advances and maintaining its worldwide lead for energy storage.
They’re even building them out in the desert, which really surprised me.
I know you’re feeling pumped up, so let’s dip our toes into the water-to-energy storage pool.
According to the International Hydropower Association (IHA), pumped hydro or pumped
storage hydropower (PSH) accounts for 94% of the world’s energy storage capacity. In comparison,
lithium-ion and other technologies are just a few drops. So, how does PSH work? Basically,
you need two interconnected reservoirs with a big gap in elevation between them.
You can use existing lakes or even decommissioned mines. However, PSH’s energy density is over 400x
lower than lithium-ion batteries. To compensate for that, you need a high head, or a large
elevation change, which is the distance traveled by water from the upper pool to the turbine.
Generally, the higher the head, the more energy you can store per volumetric unit of water.
One problem is that you can’t have high heads everywhere, which is one of PSH limitations.
However, RheEnergise is trying to water down this issue head on. The UK-based startup is using R-19,
a fluid 2.5x denser than water. By doing so, they reduce the required vertical elevation by a factor
of 2.5. Other than a sufficiently high head, a PHS plant will need reversible pump-turbines.
During daytime, when electricity demand and price are high, you let water stored in the upper
reservoir fall down by gravity. While flowing down along a pipe, water will pass through the turbine
generating electricity, which is how you produce power in a conventional hydroelectric plant.
During the nighttime, when demand is lower, the PSH turbine can turn from a generator into a pump,
moving water from the lower basin to the upper one, recharging the supply for the next big
demand. Power is stored as water’s gravitational potential energy and is ready to be used when
you need to shave off the peaks of the demand curve. You can have two types of PSH design. In
an open-loop configuration, the upper basin is continuously connected to a river downstream,
so you’ll need to build a dam to create the lower pool. Alternatively,
in a closed-loop scheme the 2-reservoir system is isolated from the hydrological network.
As you can imagine, closed-loop PSH poses a lower environmental risk for the surrounding ecosystem.
So who’s wearing the largest battery crown in operation on the planet? With a power output of
around 3GW, Bath County facility currently holds that record. The Virginia-based plant has been
running for nearly 30 years and it’s also the 10th largest power plant in the U.S., producing
more energy than Hoover Dam. Defying gravity across a 1,200-feet (ca. 366-meter) head, its six
reversible turbines can move 13 million gallons (ca. 59 million liters) of water from the lower
to the upper reservoir in around 11 hours. What’s even cooler is that it can be up and running in
just 15 minutes, which is much quicker than what fossil-fuelled plants take to ramp up.
However, it won’t be long before Bath County loses its crown. After 7 years of work and a nearly $2
billion investment, last December China switched on the Fengning Pumped Storage Power Plant for the
Beijing Winter Olympics. Once all of its 12 300-MW turbines are operational, the Fengning facility
will reach a 3.6GW power output, hitting two records with one pump. Surpassing Bath County by installed
power output and being the PSH station with the highest number of turbines in the world.
This will give the plant more flexibility in the level of energy they can handle.
For the time being, only 2 generators are online. China is planning to make another splash in the
near future. The State Grid Corporation of China (SGCC) just leaked a plan to increase
its total pumped storage power output from the current 26.3GW to 100GW by 2030. While pumped
hydro is the largest and most common type of energy storage, it isn't the only game in town.
You can’t store energy out of thin air, right? Yet, you could press your luck with thicker air.
Besides pumped hydro, China is also revamping a 30-year-old storage concept: Compressed air
energy storage (CAES). In fact, the world’s first CAES plant was installed in Germany in 1978.
The way you generate electricity is roughly the same as PSH except that you use compressed
air instead of water to drive a turbine. As for storage, the system uses the extra energy from
the grid to power a compressor and then bank the pressurized air in an underground chamber. After
years of design optimization, in 2016 Chinese researchers released a 10MW advanced CAES (A-CAES)
pilot plant. Their technological advancements made the system 60% efficient. In comparison,
conventional CAES’s efficiency can be as low as 40%. To achieve this result, scientists introduced
a thermal unit that captures and recirculates the heat generated during air compression. Heat
recovery is a technique I’ve touched on in quite a few videos recently. Also, they devised more
efficient compression and heat management systems. Since then, researchers upscaled their design to a
100MW prototype which was connected to the grid last October. Providing the daily electricity
consumption of 3,000 Chinese homes, this system is supposed to reach a 70% efficiency. While they
keep pressing forward, their A-CAES efficiency is still lower than competing technologies like PSH
and lithium-ion batteries, which are between 80% and 90% respectively. On the other hand,
it may be a safer option. According to scientists, their A-CAES works at medium
pressures so there’s only a limited risk of explosion. This is reassuring news compared
to the world’s largest lithium-ion battery melting twice over the last five months.
The Chinese aren’t the only ones storing energy out of thick air.
Hydrostor has already piloted two A-CAES plants in Ontario. And last November the
Canadian company requested the California regulators to build two larger facilities,
with a power output of up to 500 MW and an initial investment of up to nearly $1bn.
Having said that, large-scale A-CAES may be a more worthy deal compared to lithium-ion
batteries in the short term. In fact, doubling the plant power output from 250 to 500 MW
halves its per kWh cost. To be more specific, when considering the 500 MW facility we’re
looking at $100 per kWh, which is 50% cheaper than a lithium-ion battery of similar capacity.
Also, when considering the improvement of the transmission system as a use case, compressed
air has a much lower levelized cost of storage (LCOS) than both lithium-ion and pumped hydro
technologies. If their application is accepted, Hydrostor touts these plants could be ready by
2026 and last for 50 years. While PSH plants have a similar or even longer lifespan, lithium-ion
battery installations would require proper maintenance or even unit replacement to turn 40.
So, how does the Hydrostor solution work? During the storage step, they use off-peak or excess
renewable power to run a compressor and inject pressurized air into a newly-dug water-filled
cavern as deep as 1,000 feet (ca. 300 meters). The compressed air displaces water, pushing it
towards a surface-level closed-loop reservoir. The latter maintains the system at a constant pressure
during operation, which makes the process more efficient. Also, like the Chinese plant, there’s
a thermal management unit that recovers the waste heat generated by the compression step and stores
it in a tank. When it’s time to deliver energy, they send water back to the underground chamber to
release the air, which is mixed with the stored heat. The hot air then drives a turbine, which
generates electricity. The discharge step can last for up to 12 hours, which is much longer compared
to lithium-ion batteries, typically running for up to 4 hours. However, although reusing waste heat,
the Hydrostor round-trip efficiency is still capped at 60%. In terms of logistics, A-CAES
systems like Hydrostor are more flexible than PSH because they’re not limited to a sloped landscape.
While it’s true Hydrostor will need to store compressed air in an underground cavern,
the company CEO says their plant is versatile enough that it can be built on 70% of the planet.
Water and air are two classical elements for energy storage, but what about the
other element we all know? Lithium-ion batteries are so ubiquitous that we would have expected
it to be the guest star. However, despite the hype, it’s just an extra for the time being..
Backing up Moss Landing natural gas power plant from December 2020, the largest lithium-ion
battery energy storage system (BESS) can only dispatch 300MW. This is 12x less than what
Fengning PSH will deliver at full scale. On the other hand, Vistra Energy, the facility developer,
is looking to expand it's power output to up to 1.5GW. As it stands, the plant features 4,500
stacked battery racks, including 22 modules each. While PSH still covers most of our storage
capability, lithium-ion batteries are catching up. As of 2017, lithium-ion accounted for
around 90% of new large-scale chemical battery storage additions. In fact, the electrochemical
battery is expected to supercharge its potential up to 28 GW per year by 2028.
Why’s that? When comparing the levelized cost of energy (LCOE) of the two technologies,
lithium-ion batteries are more cost-effective only for storage durations shorter than 4 hours. That’s
why they’re the optimal solution for fast-response grid stability. Lithium-ion batteries are the
newer technology versus PSH systems, which means they’ll likely experience a much greater LCOE
reduction thanks to technological innovation and economies of scale. Bottom line: PSH has mostly
matured and has less room for improvements, giving lithium ion batteries a chance to catch up. Just
think that the price of battery packs decreased by 89% over the last 10 years. Also, a recent
study forecasted their LCOS to be lower than PSH and CAES for most of the stationary applications
from 2030. So, it’s fair to assume that they will be pivotal in balancing our energy grids.
This is where PSH shows that it still has some cards up its sleeve. New pumped hydro
installations are flooding unexpected areas of the Earth, like deserts. This past February,
rPlus Hydro submitted an application to build Nevada's first pumped hydro storage facility.
Apparently, White Pine County ticks all the boxes for hosting pumped storage hydropower.
Like a 2,000-feet (ca. 610 meters) vertical drop over a short distance, plenty of space
to create two new large reservoirs and a nearby source of water to fill them up. After completing
a feasibility study, the company could start building their 1GW closed-loop PSH plant in 2025.
Just to give you a sense of scale, the White Pine storage capacity would cover about 1/8th
of Nevada’s peak power demand on a hot summer day. One eighth of the demand includes all of the air
conditioners in Las Vegas when temperatures soar over 100 F (~38 C), so there is a substantial
amount of power released by this project. Once up and running, this water-based battery will
supply electricity to the local community for up to 8 hours. White Pine is not the only project of
this kind in the US. To water down California blackouts, Eagle Crest Energy is developing a
more sustainable 1.3GW plant in Eagle Mountain. In this case, instead of digging two new pools,
the project developer will fill up two abandoned iron open pits placed at different elevations in
the Mojave Desert. On top of that, the plant will also use surplus renewables from a nearby
2GW solar farm to pump water from the lower mine to the upper one. After being fully charged,
this storage oasis will flush green energy for up to 18 hours. However, this won’t happen until
2027. Beyond the arid Southwestern US, PSH plants are popping up in the Arabic desert as well.
As of last December, The Dubai Electricity and Water Authority (DEWA) had completed 35% of their
250MW pumped hydro plant. With an investment of around $400 million, this will be the first
facility built in the Gulf region and may go into service in 2024. While not being in the desert,
mega-scale pumped hydro facilities are progressing in Asia, Europe, and the UK as well.
If we want to decarbonize our grids, we need a huge energy storage capability for managing the
variability of renewables like solar and wind. While lithium ion batteries have dominated the
conversation, the old kid on the block is still showing that it can help us hit our needs today
at a price we can afford. PSH is still wearing the largest battery crown and it makes up most
of our energy storage portfolio. It’s not a knock against lithium ion or tech like A-CAES,
which have a bright future, but let’s not get caught up on the newest, latest,
best. Sometimes it’s the older ideas that can help pave the way for a brighter future.
And if you’d like to learn more about the science behind hydropower or compressed
air energy storage, I'd strongly recommend checking out Brilliant.
They have fantastic interactive courses that have helped me to get a better
understanding of the physics behind all of this, which includes interactive courses in
topics that range from Electricity and Magnetism to Logic. They've got something for everybody.
The Classical mechanics course ties in directly to some of the concepts from this video.
It takes you through the basic principles of physics like kinetic energy, conservation of
energy, and the forces in fluids and pressure. Ever wonder how fast you can take a turn on
a banked road? Classical mechanics has your back. I had a good time going through this one.
All of the concepts are taught through fun and interactive challenges to help
you understand the "why" of something ... not just the "how." It helps
to develop your intuition, which is my absolute favorite part about Brilliant.
Go to https://brilliant.org/Undecided
to sign up for free. And also, the first 200 people will get 20% off their annual
premium membership. Thanks to Brilliant and to all of you for supporting the channel.
So are you still undecided? What do you think about leaning into older
technology like pumped hydro for solving our energy needs?
Jump in the comments and let me know. And if you have knowledge on this,
or work in the industry, please share your experience so we can learn more together.
And thanks as always to my patrons. All of your direct support really helps with producing
these videos and to reduce my dependence on the almighty YouTube algorithm. Speaking of which,
if you liked this video be sure to check out one of the ones I have linked right here.
And subscribe and hit the notification bell if you
think I’ve earned it. Thanks so much for watching and I’ll see you in the next one.