This video was made possible by CuriosityStream.
Watch thousands of high-quality documentaries and get access to my streaming service, Nebula,
by using the link in the description.
In the 1950s, the French set aside conventional aircraft building wisdom to design a plane
unlike anything recognizable today.
With a cylindrical wing, plans for ramjet propulsion, and the ability to take off and
land vertically on its tail, this plane would lay the foundation for a new way to protect
French air space.
With planes that could take off from anywhere, rising up to meet the enemy like a swarm of
angry bees.
Conventional airplanes need runways to get airborne.
Accelerating until their wings generate enough lift to take off.
One way to reduce the length of runway needed is to give the plane more power so it can
get up to speed faster and lift off earlier.
But in the 1950s, aircraft designers realized that with enough power, planes might not need
runways at all.
Instead of powering down a runway, they could be oriented towards the sky.
And use engine power alone to lift off and accelerate until their wings generate lift.
The advent of more powerful engines gave rise to a new category of experimental aircraft
called tail sitters.
A configuration that could potentially revolutionize air forces.
In any conflict, runways were going to be the first targets.
And their destruction could render entire air forces inoperable.
But tail sitting planes wouldn't need runways… they could instead be hidden or deployed to
defend vulnerable targets.
If engineers could get the configuration to work, tail sitting planes promised to fundamentally
change how and where aircraft could be used.
In 1954, a French aerospace firm renowned for aircraft engines, began developing wingless
test rigs to prove the feasibility of the tail sitting concept.
Getting a tail sitting plane to work would require more than just powerful engines.
Entirely new control systems were needed to make vertical takeoff and landings possible.
It was a daunting engineering challenge for the time.
But the French weren't the only ones perusing the idea.
The Americans had also developed tail sitting prototypes.
And with each plane, they experimented with a different combination of propulsion, wing
configuration and flight control.
But the French had something more radical in mind.
The C.450 Coléoptère would barely even resemble an airplane, because its powerful turbojet
engine would be surrounded by a ten-and-a-half foot diameter cylindrical wing.
The highly unconventional wing promised greater efficiency by reducing wasteful wing tip vortices
which occur on conventional wings And its compact shape would reduce the amount of space
needed for takeoff and landings.
But the French also theorized that the radical wing could eventually be engineered to function
as a Ramjet, compressing incoming air, mixing it with fuel, and igniting it to power the
plane to supersonic speeds beyond Mach 2.0.
The wing would be a radical combination of lifting device, airframe, and pulplusion,
all in one
To control the aircraft during take off and landings, thrust would be vectored using deflecting
vanes in the engine's exhaust.
During conventional forward flight, triangular winglets would provide directional control.
And to help transition back to horizontal flight, small retractable fins would deploy
on the fuselage nose.
But landing the Coléoptère would be challenging.
With the pilot’s back to the ground, they’d have to look over their shoulder.
So designers innovated a cockpit with a seat that could swivel 90 degrees to remain upright
regardless of the aircraft’s orientation.
The Coléoptère would look straight out of science fiction.
But as an aircraft being designed in the 1950s, long before computer simulations, daring test
pilots would have to play just as much of a role as engineers in getting it to work.
The Coléoptère began flight testing in April of 1959.
First undergoing tethered evaluation before progressing to free flight.
By May, the plane had proven its ability to hover for minutes on end and had even flown
up to an altitude of 800 metres.
The radical machine made waves throughout France and around the world.
The Americans who had keenly followed the progress of the French from the very beginning,
reached out to Aerospace firms to study cylindrical wings for themselves.
But as with most novel designs, flaws soon emerged.
Without the benefit of a conventional wing to counter rolling tendencies, the Coléoptère
slowly spun on its axis during hover.
Making control extremely difficult.
And perched high on top of a vertically oriented plane, pilots struggled to judge just how
far the aircraft was from the ground
And in an emergency, conventional planes could still land without engine power.
Unlike the Coléoptère, which would always need its engine to land safely.
But the French pressed on, confident that they could sort out the prototype’s flaws.
By July of 1959, engineers were ready to tackle the more challenging procedure of transiting
from vertical to conventional forward flight.
It would be a pivotal moment for the program.
On July 25th the Coléoptère lifted off vertically.
but during its transition, it suddenly became too inclined and slow-moving to maintain altitude.
The plane started tumbling back to earth, and the pilot struggled to regain control,
only barely managing to eject in time.
In an instant, the prototype was destroyed, and development suddenly ground to a halt.
To continue, the program would need to secure additional funding to build a second prototype.
But the funding would never materialize.
Because the Coléoptère would be the last major effort at building a pilotted tail sitting
plane.
By 1960, the Amercians had abandoned development of their own tail-sitters.
The configuration was a dead end.
Simply too much of a compromise when it came to payload and range.
And far too dangerous to pilot.
And as it turns out, directing engine exhaust to lift the aircraft, instead of tilting an
entire aircraft.. was a more practical and safer solution.
The Coléoptère’s cylindrical wing also proved to be an elusive concept.
With less induced drag, it was in theory more efficient than a conventional wing.
But in practice, parasitic drag from the wing’s structure largely cancelled out benefits and
introduced a host of other aerodynamic challenges.
Setting aside conventional aircraft building wisdom often results in dead ends.
But every so often, it leads to a breakthrough.
In a few weeks, I'll be releasing my second Nebula Original.
This time about a plane that for years was America's best kept secret.
A plane so revolutionary, it fundamentally changed military aircraft design.
I’ll be releasing it on Nebula, because covering military topics on YouTube is just
too risky.
Too often educational content is needlessly demonetized.
But with Nebula, I’m free to make the content I want to create because Nebula is owned and
operated by creators like me.
And it’s where you can watch exclusive Mustard content, without ads or sponsor messages.
The best part about Nebula is that it’s Free when you sign up for CuriosityStream.
A streaming service with thousands of big budget award-winning documentaries from science
to technology to history and nature.
For a limited time, Nebula and CuriosityStream are 41% off.
That's less than a dollar a month.
Watch high-quality documentaries, and help support Mustard and other educational creators
by going to curiositystream.com/mustard and use the promo code ‘mustard’ when you
sign up.