Welcome to the Hydraulic Press Channel.
Today we are going to crush these power tools.
While they are running of course.
And, I think this is one of the most stupidest things that we have ever done.
So, don't try this at home or anywhere else.
And, we have this electric drill.
Angle grinder and powersaw.
And, there is good chances to get, like this to your head or be electrocuted,
so I think this is quite good video. (Laughter)
Yeah, let's start with the grinder.
And, here we go!
Yeah, that was pretty cool!
Hahahahahaha.
I think this was one of the best crushes, ever.
Everything went really well.
And.
As you can see, we crushed the motor.
It's completely,
gone.
And.
the, like
gearbox thing was also crushed very nicely.
Here you can see the gears. And the, grinding thing is also completely crushed.
So, great success.
And, the next one is the drill.
So, the drill was quite similar to the grinder.
And, let's raise the press to have a look.
Duct tape is quite good.
(Laughter)
Yeah.
This was also loose from the grinder.
And then, I think this might be actually...
This looks very similar motor that the grinder had.
Yeah, it's totally the same.
And, then we have just different gearbox here.
Yeah, and then the saw.
And, then the saw.
This is probably the most dangerous one.
And we have nicely removed the safety function of the saw of course.
That didn't go as planned, we have to mount the saw better.
New try.
Yeah, it tried to escape again and...
partly did, but I think it was still quite good crushing.
I think we are going to get a new try.
Right here and now.
Like this.
Haha.
So, our uh, saw is now destroyed.
And what a surprise, I'll take my gloves.
And, once more time. Same motor.
Yeah, and some kind of gearbox, this time a piece of the...
I think this didn't have any gearbox it was just the super bearing between the motor and the plate
and the bearing has punched a hole into the engine.
And this is really warm, this engine. I'm not sure if it's because the pressing or electricity.
And the blade itself.
This is in surprisingly good condition. Only the tips of the things are like damaged.
And, yeah there is some damage also in our press.
You can see here.
But I think the most of the flying material was from the saw blade and not our press.
And. (Swearing in Finnish) (Laughter)
And.
Here is the handle.
I have now good collection of these.
And, seems that our strap is OK.
Yeah, but I think that is all for today. Thank you for watching, and have a nice day.
And for today's extra content, we have this mermaid.
It is extremely dangerous and it can attack at any moment. So we have to deal with it.
(Laughter)
We found this. It's like handcranked apple peeler.
It can be improved quite a lot.
This says here that 25 thousand revolutions per minute.
And, here we go.