Hi I'm Mat from eSpares, in this video I'll be showing you how to identify an
error code on a Whirlpool washing machine.
Your machine will display an error code if it has identified a problem or fault.
On Whirlpool washing machines with a digital display this will be identified by two letters
For the purpose of this video I'm using an older machine but the process of identifying
an error code and then fixing the problem will be similar for all Whirlpool washing machines.
Error codes can be misleading but there could certainly be used as a guide
to identify the problem and then fix or repair it.
Safety first: Always unplug an appliance before carrying out any work.
Here is a list then of Whirlpool washing machine error codes.
The first one is FH error code this indicates that the machine has a problem filling with water.
So the first area to check is the water supplied to the machine itself.
Then check for a kinked hose or hose that's been trapped under the machine.
If all those areas are fine check the water inlet valves within the machine,
and also remove the hose at the back
and check that the filter within the inlet valve is also OK.
Next error code FDL relates to a door locked error.
An error code FUL relates to a door unlocked error so make sure the door
can open, close and lock properly and if the problem persists check the lock itself.
Error code FP relates to an output error meaning that the machine can't empty correctly.
So make sure first off the you drained the machine if you haven't all the water will spill out.
And you need to check the filter so grab yourself a suitable tray
to put under the machine because there will still be water behind the filter.
Take the filter out and check for any debris that you might find inside.
Now if your machine is displaying E4 or UE after a cycle this indicates an unbalanced error.
Which means that you should put similarly weighted items inside the drum
otherwise it won't spin correctly.
Now the next few errors relate to the heater and its sensor.
The heater on this machine is located at the bottom at the front
now on your machine it may be at the rear of the machine so for the purpose of showing
you the heater and it's sensor I need to remove the whole of the front of the appliance.
Error code F5 relates to a temperature error which means that the heat sensor
is not giving the correct readings, so check the connection
and if necessary also check for continuity of the sensor.
F08 indicates that the heater is an open circuit so check the heater for continuity with a meter.
F12 relates to an element short or the heater has failed completely
so replace if necessary.
Fault code F 09 on some machines is an overflow error which indicates that
water has been found on the base of the appliance this may be a leak within the machine itself
or after a flood, so check for any leaks within the machine and drain the base of the appliance
The following fault codes relate to the motor
so I'm going to tip the machine over to show you the motor better.
Error code F06 relates to the Tacho on the back of the motor here you can see the Tacho.
Check its connections for a loose fitting or corrosion
if the problem persists check the tacho coil for continuity.
F 07 on some models may relate to the motor itself same with F 10 this usually related to the motor
thermal protector within the motor on some models but F10 and F07 may also relate
to the control board and that's the area I will show to you now.
F07 which could potentially be
a problem with the motor itself is more likely to be a problem with the motor triac
which can be found in this control unit and would usually require a replacement control unit.
F 10 is a problem with the two boards not being able to communicate with each other.
so check for loose or corroded fittings.
The following error codes all relate to a problem with the control unit.
A control unit can only be proven once the control unit has been replaced.
Those error codes F14, F16, F18,,F20 F21, and F22.
So there we have it a comprehensive guide to error codes on a Whirlpool washing machine.
Parts for washing machines and washer dryers for all makes and manufacturers
can be found on the eSpares website. Thanks for watching.