howdy folks Kirk here with kirk Giordano plastering my son Jason on the camera my
buddy Larry bellman who is deaf built about 20 30 editions second-story editions here in
Alameda we're going to show you how he installed this door here very wanna show him how you did
this and we're just gonna put it back together yeah this is a marvin door to vinyl padded door
there's one of the best doors on the market only what gives you the structures how they wanted to
do this you frame your opening the proper size and then before the door goes in you put a bead
of sealant a polyurethane look we use it on here it's called sickle flex it's one of the better
ones on the market so we put this bead on the top of two sides and they all our clients which
is now covering can't see it goes on top of this bead though there it is right here Curtin has it
right there so there's a cop behind that also here on the sill we put actually three beads
we put one beat of the seal seal it and then also two beads of a visa which will in turn hold this
cell down and keep it from moving after you get all caulking in there and then we take the door
with the door in and then we nail down here and do it these this nail on flange and then
we put this clash of paper over the top flange right here to waterproof it and that's my part
of the installation of door then Kirk comes in and does his part takes over and get some more
waterproofing now what I what I'm gonna do now guys is pretty much repeat the cycle Larry just
did I'm gonna put some more of this peel-and-stick one side is appeal we're gonna put that directly
on the flange come up here put another piece over here and actually Larry put this peeling
stick first he caught it and then he stuck this flange on it and the coffee and he used here it
is an adhesive it's a polyurethane they make the Sikaflex is pretty good one rain buster 900 is
another excellent one so when we do our our papers and flashings I like to get people say what's the
difference caulking is caulking not all caulking is a sealant not all caulking is the same there's
polyurethane stuff whether or not it's Sikaflex or whether or not it's rain buster they're both
good they both are adhesives and what it does is it fuses the paper to these frame that's
the keyword guys that's why we don't use any any old caulking anyway we're gonna get started and
I'm gonna show you how we put our second layer according to Marvin's specifications alright
guys I'll show you where we're at with this I'm gonna take this piece right here and I'm gonna
do the peel and stick on appeal it put it back over this flange and underneath this paper then
I'm gonna put two or layers of paper on top of that and fold this down what we have over here
is we've got that done we've got the peeling stick underneath we've got two layers of paper
under this and this goes to here because Larry's going to put some wood trim here then the wires
going to be a place back over there I'll show you how I do it guys it's it's mighty simple you peel
this stuff off here once you get a good start here you're okay get the good start going and
you'll be fine and I just pull this piece right here nasty stuff and just keep sticking this then
what we do is we fish it underneath the other piece we've got foundation down here nothing
we can't handle then what we do is we fish it in back here fish it in there fish it in there
fish it and we want to go underneath this piece of paper and underneath this top plan then once
that's done we put more paper on because this paper is pretty beat up what I'll do is I'll
come over here grab the roll quick way to cut paper guys hold your knife right on that roll
hold it one piece drop it down to pee okay let's try that again guys three piece and the last piece
Okay, now I'm going to do the exact same thing with Dad's because the paper is pretty beat up.
I'm gonna give it a little long tap this and so on this piece here is the same situation it's
got to overlap this one then this the last piece is going to go under here we already
have the boy stop here we're putting another one over it because that's what we have to do guys,
okay so this paper will go here, and this one is going to come here next time you see us Larry will
be installing his wood trim all right there is showing me something new I didn't know that you
caulk those edges well that's the reason I'm the general contractor you're the stucco man hey and
then the reason we drew these cookie you use glue but the single flex is just a great product it
expands a little bit try to use your regular glue Elmer's whatever it dries out and your
minors always help open up so if you use a product that has a little flexibility to it chances are
Your mind will stay nice and tight, and water won't get in here. Oh,
learn something every day I give you credit on that, and what wife tells
baby you can't do them miter corner to save your life in a lot of truth in that,
but I can stucco extremely well plaster and stucco that's what I do all right grab my gun.
galvanizing else even though the holes we could kill the putty i'ma just want to use
working outside exposed to the weather
All right, Larry, you're an animal next, what I'm gonna do here is put this down,
staple it all off, and we're going to put a bead of caulking polyurethane stuff right here,
and we're all set anyway; my name is Kirk; I'm with Kirk Giordano plastering working
with Larry Bill Mann he's built about 30-second story home additions here
in Alameda always pleasure folks anyhow, as usual, Jay and I'll see you on the next one.