Hi, Mike Corliss with Tormach.
Today I'm going to talk about installing and removing the 5C Collet adapter
This is the 5C Collet adapter it goes...
...in the spindle nose of the chuck.
It's got a key in it, that's what locates...
...on your 5C collets, Ok? It slides in...
...locates off the key.
So seeing your collets can only go into this
...collet adapter one way, if you go to use an emergency collet or a soft collet...
...like this,
but it's also got the key in it...
you're going to want the insert...
...to go in and out of the machine the machine the same everytime
so anything machine in the insert,
...is gonna repeat. Now it's all going to run pretty close because everything is ground and polished.
everything is going to run pretty good but you'll get the most accuracy
and the most repeatability...
if you put everything together and take it apart the same way every time.
so this doesn't have any marks on it yet.
We put a black mark on here
when we put the 3 Jaw chuck on
and we'll just line this key up with this witness mark.
That we had for the three jaw chuck.
Then just give it a tap to send it home.
as you put a collar
and drought uptake withdraw to did
it will make sure that college editors your
said so you're not sure you got in there
hallway as long as you got it pretty so when you draw it up
play with the Droid 2 in Wilson
go about their just a coherent buyer
you can use a steel bar for a minute or so
you don't mark things up as much the closer you get to the editor
you spill or the square it's gonna ask that instead
you need to see it here you know
day more would be
that's a you install and remove the calendar
if you have installed if you don't want to keep looking to see if you got it
installed a key way
you could but it'll do one faces a dremel tool awesome
for everyone here about this a little research you know
got it or hated the way he would be so repins
less variables better