My name is Allen Hart and today we're working in Otley near Leeds and we'll
just install a new combi boiler so we've got a nice flat wall here today so we're
just gonna show you step by step how we do it so the first thing and one of the
most important things we protect the property we've got a bucket Platinum
there so that's the boiler that what is Darwin today
and then when we open this just finds back with all the useful things ooh I
love your fitness pack on this just slides out so if we see that all the
Bible is still in the box so the pilot can be just kept nice and safe
well we fit the jig oh and then just mark all this out so there's a level
here so we can easily level the pilot Rob so one thing to point out with this
it must be installed by gas a registered engineer if it's not installed by gas a
registered engineer then you will have no warrants with the boiler and you will
also if you come to sell your property you will have that the right
certification that you'll need to actually sell the property so always
make sure that you have it done by gas therefore interested engineer
so we have up to our car drill move us to there
so what we'll do is we'll just stitch that so we drilled a load of six mill
pilot bits all around on a flow so it's nice and Nate is out
so I've put the straps back on the box and left the farm stuff in the bottom
and now to use that has been key pop rice together so I've just got scaps to
take out the bottle here but what without these are tested before the come
out so you should never have a fault fault it won't come install because I've
all been tested and now we're just going to come off just don't get bent
so what we normally find is these notes on this boxer dog by not very well so
you can't just tie them off in my mind so all you need to do is see the nuts on
the back just slack on them nuts off and then you'll be able to connect it up
very easily on the back of the vowel so if you collected all their mum now so
now we can just nip them all off and then just take them back knocks back up
I will I always do this first before I connected it back to it because if we
connect the pipes to it it can be quite awkward to get them to line up so this
is just the way I do it so just connected the pressure-relief
pipe if you see there he's bent so these always come twisted I'll Bend on the on
the back see boilers and so you can if you want there's a little grub screw
there you can just undo that and you can straighten it up a little bit or you can
just try and Bend this pipe a little bit all the things I've seen I've seen
people cut this and then just pull sake I'm just destroying it up by the one so
I've actually just twisted the pipe a little bit so I've just drilled for the
blow-off now and we'll just slave that and we're just
gonna put some non saying mistake in that we do on the carpets can we contact
with the cement because the cement will corrode the copper over time so we just
don't work pipes now so cause perhaps fault sir
but is that there's Phenix I mean you fill its up and then we're
just going to do a gas now so we've got a pilot from running now so we're just
gonna check the emissions we just got scared and I do that
we've also got pushing it after on that
hostile shit system along the cleanse
so we just finished enough now so I've installed this box this box it platinum
so this box of platinum cause of a ten year parts and labor warranty we've also
got we've installed the FIR Knox filter so the phonon filter come from a 25 year
warranty and we've also put we've cleaned it out with fir Knox f5 and
we've also added fir Knox inhibitor f1 protector in afterwards so that I'll
protect the system thank you for taking the time to watch our video helpful
install a combi boiler