If you got an iPad from your friend or purchase second hand,
it could still has the previous owner’s Apple ID on it,
which they might forgot or can’t deliver.
Then it’ll be telling you that Apple ID verification failed
when you try to turn off find my iPad.
Finally, you’ll see this Apple ID locked message.
No worries, in this video I’m going to show you
how to unlock it without using the Apple ID or passcode.
So, let’s dive in!
The tool we are using here is 4MeKey.
You’ll find the link in the description below if you’d like to download.
Before we start, if you have data on this device,
make sure to back them up if you need to.
Then disconnect the device from the internet.
Once done, plug your ipad into the computer.
Then go to the Turn off find my iPhone field.
click on start and agree to the disclaimer.
4MeKey will download the jailbreak tool first.
Now insert an empty USB thumb drive into the computer,
once detected, hit start to create the jailbreak drive.
Once done, you’ll see a guide showing you step by step
how to complete the jailbreak on Windows.
You can scan the QR code here to view the guide on your another iPhone or iPad.
So let’s now restart the computer,
When it boots up,
press F12 key to enter the boot option,
then boot your computer from the UEFI hard drive.
Then we’ll see the checkrein jailbreak wizard,
make sure your iPad is still connected at this point,
then you should see the device information right here.
It says the iOS is not supported at this point.
No worries, we should head to the Option first,
check off allow untested iOS, then go ahead and quit back.
Now it says iPad is untested,
that's fine, let's proceed.
The device will be put into recovery mode first,
press next to confirm.
Once in, press start,
then quickly follow the instructions to put your iPad into DFU mode
before the countdown is over.
For an iPad with Home button,
is press and hold both the power and Home button for 4 seconds,
then release the power button
while continue holding the Home button for another 10 seconds,
Once in DFU mode, you’ll see the jailbreak code running on your device.
Well done, now let’s reboot the computer,
and open 4MeKey to start over.
This time you’ll get straight to the device information screen,
Click on start to proceed.
Well done, now it says find my iPhone turned off successfully.
Let’s proceed with the FMI status verification.
Copy the serial number,
then click on verify the FMI status.
Now paste the serial number into the search bar,
and click on the search button.
As you can see, the Find My device service is off now.
Let’s switch back to 4MeKey, and enter the search result.
Then hit continue.
You iPad will be restored to factory settings.
We have backed up this iPad, so we confirm with a Yes.
Ok, now that we see the hello screen, let’s go ahead and set it up.
When we see the Data and Privacy option,
we know the Find My iPad serivce has been removed.
Let's move on.
Once you get to the home screen, in Settings,
You’ll notice the Apple account has been signed out,
which means Find my iPad is disabled too.
That's it!
Thanks for watching.
I hope this video helps you guys.
Have a nice day.
See you in the next video.