Installing and programming your ProSeries 3009 Misting Tap Timer can be
done with these easy steps. Start by installing the battery. Remove battery
cover, insert a nine volt alkaline battery and then replace the battery
cover. To program the Pro 3009 Misting Tap Timer start by setting the time and
day. Press SET. The hour will start flashing. Adjust using the PLUS and MINUS buttons.
Remember to select AM or PM. Press SET to switch to minutes and again for days.
Pressing the SET button again will confirm the time and day settings. If the
screen stops flashing, keep pressing the SET button to get back to the hour,
minute or day that you want to change. The 3009 Misting Tap Timer is programmed
in stages. Here's an example. To operate for 10 seconds every 5 minutes over a day.
Set ON to 10s, set OFF or delay to 5 minutes.
Set days for watering. Set start to 6AM. Set stop to 5PM. To program press MODE
to set the on time. The hour will start flashing. Use the set button to
switch to minutes and seconds. Adjust using PLUS and MINUS.
Next press MODE to set the off time. The owl will start flashing. Use the set
button to switch to minutes and seconds. Adjust using PLUS or MINUS. Next press
mode to set the watering days. This will allow you to set each day of the week
that you want to water. Press the SET button and day one or Monday will be
flashing. To keep Monday, press the PLUS. To remove press MINUS. Repeat this process to
set each day of the week. Next press MODE to set the program to start time. If the
screen shows OFF, press PLUS or MINUS to adjust the time. The hour will start
flashing. Adjust using the PLUS and MINUS buttons. Use the SET button to switch to
minutes and seconds. Next press MODE to set the program stop time and again if
the screen shows OFF. Press PLUS or MINUS to adjust the time. The owl will start
flashing. Adjust using PLUS and MINUS buttons. Use the SET button to switch to
minutes and seconds. When finished press OFF button. To return to the clock if the
screen stops flashing keep pressing the MODE button to get back to the on/off
days, start or stop time that you want to change. To turn a start or stop time off,
keep pressing the PLUS button until OFF appears. Your ProSeries 3009 Misting Tap
Timer is now programmed. To use The manual watering function start by
pressing the ON button. The on and off times are linked to the previous
programmed intervals. The manual program will continue to operate until the OFF
button is pressed. All programs will resume when the manual function is
stopped. The timer can also be suspended for winter or rainy days.
Press and hold OFF for three seconds until the word OFF appears. To cancel the
suspension, hold OFF until the word OFF disappears. All programs will resume when
the suspension is canceled. For more information on the 3009 Misting Tap
Timer visit our website at holmanindustries.com.au