﻿Hi I’m Gidon from thetechnologyman.com. The Soundcore Liberty Air 2 Pros are an
upgrade to last year’s Liberty Air 2s, most notably now with Active Noise Cancellation.
They retail at around £130 or $130 which isn’t cheap but is more affordable than
many earbuds sharing their range of features. I’ve been testing them over the last month or so,
comparing them mainly to Apple AirPods Pros, LG’s FN7s and the non Pro Liberty Air 2s.
I’ll let you hear for yourselves how they sound and how effective their ANC is.
And you’ll be able to hear how their microphones compare to the AirPods Pros for
phone calls in both quiet and noisy environments. And as usual I’ll run with them to see just how
secure their fit is. So let’s take a closer look. Overview
In the box you get the earbuds themselves, the charging case, a USB-C charging cable,
no less than 9 sets of ear tips including the ones already fitted, and a quick start guide.
As well as the white earbuds I have, they come in 3 other colours: black, blue and pink.
The charging case is on the large side partly to accommodate the larger than average stem
based earbuds. The case with the earbuds weighs 62g with the earbuds weighing 10g - about the
same as the AirPods Pros and the Liberty Air 2s. It’s the case that’s around 10g heavier
than the other two. But they’re still a little lighter than the Liberty 2 Pros.
The case has an attractive matte finish with a smooth sliding action to open and close.
There’s the USB-C charging port around the back with the pairing button beside it. The front has
3 battery status LEDs that indicate the remaining charge of the case when you slide it open.
When you open the case for the first time the earbuds will turn on and enter pairing mode,
ready to pair to your device. If you want to pair to another device, make sure the earbuds
are in their case and the case is open. Then press and hold the pairing button for 3 seconds
until the earbud LED indicators flash white. You can use either earbud separately in mono mode,
simply by returning one earbud to its charging case. This is a feature I use a lot for listening
to podcasts or making phone calls. You can reset the earbuds if you have
any connectivity issues by returning them to their case and with the lid open, pressing and holding
the pairing button for 10s until the earbuds’ LEDs flash red 3 times and then turn white.
Like most true wireless earbuds they can’t pair with multiple devices simultaneously
but unfortunately they also don’t have any intelligent handover between devices
like for example the AirPods Pros. So you’ll have to manually switch between, for example your phone
and tablet. But they do use the latest Bluetooth 5.0 and I found the connection was generally
reliable and their range was above average easily making it the next room over 10m away.
Charging the 500mAh case with a USB-C cable takes around 2 hours and the case supports
wireless charging which takes around 3 hours, via any compatible Qi charger. They also support fast
charging, with a 15 minute charge of the 55mAh earbuds providing three hours of playback.
A full charge provides around 7 hours of playtime with ANC off and the case can
provide up to 3 additional charges. This is more than the 5 hours of the AirPods Pros but around
the same as the Liberty Air 2s and a little less than the 8 hours of the Liberty 2 Pros.
I got a little less than 7 hours, but then I usually had ANC or transparency mode on,
and the volume at around 80% or higher when running with them.
The earbuds are a little larger than average with a full length stem and a slightly oversized head.
They’re similar to the Liberty Air 2’s just with a more bulbous head. But a fair bit larger than
the AirPods Pros or LG’s FN7s both with their shorter stem which I do prefer the look of.
They have an attractive design though and feel well made like their case. And their fit in
my ears is good - although I had to experiment a little with the huge range of supplied ear tips.
The latest firmware just introduced an ear fit test which actually worked pretty well
and did fail when I deliberately inserted them incorrectly in my ears.
They fit better than the Liberty Air 2’s and I could even use these for running - something
not possible with their predecessor. Although they wouldn’t be my first choice - they didn’t fall out
but didn’t feel as secure as LG’s FN7s or Apple’s AirPods Pros - perhaps because they’re larger.
They do have an IPX4 sweat resistance rating.
Their touch controls work well and are configurable in the accompanying Soundcore app.
By default a double tap of the right earbud will pause and resume playback and a double tap of the
left earbud will skip a track. A double tap of either earbud will answer a phone call. A long
press of either earbud with switch Ambient sound mode or end a phone call. If you’re only using one
earbud by default a double tap is Play / Pause and a 2s hold activates your voice assistant.
You can choose in the app whether you’ll hear audible prompts when you control your music
or change Ambient modes. For the Ambients modes it might have been nice to have an option for
a spoken prompt, since it’s not easy to determine which mode you’re in from the audio prompt alone.
You can change which Ambient modes you cycle between with the long press. By default they
cycle between ANC and normal mode. It makes more sense for this to be ANC to Transparency
mode which can easily be changed. Ambient modes aren’t available if you’re just using one earbud.
If you want to be able to control volume or activate your voice assistant, you can easily
customise any of the touch controls in the app. These custom settings don’t apply when
you’re using a single earbud in Mono mode, but you can customise Mono mode separately.
If I was being picky I would have liked to have seen an additional single or triple tap option for
more flexible configuration, but I can understand that a single tap often gets activated accidently
adjusting the earbuds in your ears, and a triple tap can get a bit complicated. The only change I
settled on was configuring a long press of the left earbud to activate my voice assistant.
There’s also ear detection which automatically pauses and resumes
playback when you remove and reinsert either earbud. You can turn this off if you like but
it works pretty well. Audio quality
With every Soundcore earbud release comes a new driver technology - what they’re calling this time
PureNote . The 11mm drivers do sound good with a crisp, rich sound and a decent amount of bass for
in-ear earbuds. For a lot of music I actually preferred their sound to my AirPods Pros which
are significantly more expensive. I found for some tracks I would have liked a little more detail in
the mids and in its default Soundcore Signature EQ mode there was some sibilance at higher volumes.
The Soundcore app offers an almost overwhelming amount of customisation and it’s worth
experimenting with the various EQ modes depending on what music you like to listen to. You can not
only create your own custom EQ profiles, but it’s also possible to configure an existing
preset to your tastes. And on top of that there’s the HearID feature that lets you personalise the
earbuds based on your hearing. The app guides you through a quite rigorous hearing test for
each ear and even lets you adjust this curve and integrate it into the existing EQ presets.
This feature has improved since I last tested it, and I’d recommend giving it a try - but for my own
hearing I didn’t notice that much difference and left it switched off when I wasn’t testing it.
The earbuds don’t support the higher quality aptX codec like their predecessors the Liberty Air 2s,
only the standard SBC codec and the still higher quality AAC codec.
Audio sync was pretty good, but I could still notice a small amount of delay
watching YouTube videos on iOS - something many true wireless earbuds struggle with.
Sound leakage with their snug fit was minimal but then these
aren’t the loudest earbuds I’ve tested. You can listen to a sound test and hear
for yourself how they sound with different EQ profiles and compared to the AirPods Pros and
the Liberty Air 2s. Ideally you’ll need to listen with decent headphones for the best experience.
Feel free to use the video chapters in the timeline to skip ahead if you
like. Let me know down in the comments which earbuds you prefer the sound of!
Liberty Air 2 Pro
Liberty Air 2
AirPods Pro
Liberty Air 2 Pro
Changing Ambient and EQ modes
ANC and Transparency mode
A very welcome feature at this price point is both Active Noise Cancellation and Transparency Mode.
In-ear earbuds are never going to achieve the isolation of over ear headphones but
these earbuds did a lot better than I was expecting and were comparable to
the AirPods Pros. And they have an impressive amount of customisation in the Soundcore app,
with three modes all targeting different frequencies: Transport, Indoor and Outdoor. And
there’s a custom mode where you can spin the dial to try and filter out the most distracting noise.
You’ll need to experiment depending on your surroundings, but there are subtle
yet noticeable differences between the modes. As you’d expect they’re not as good as over ear
headphones like the Soundcore Life Q30s I reviewed recently but they’re not far off and whilst they
don’t eliminate background noise, together with their passive noise isolation they certainly
dampen the background noise significantly. And the transparency mode that lets you hear
ambient sounds works well too, sounding fairly natural. Even this is configurable with both
a Fully Transparent mode that lets in all ambient sounds and a Vocal Mode that attempts
to focus on amplifying voices. You can listen to a sound test
comparing the Liberty Air 2 Pros ANC and Transparency modes to the AirPods Pros.
Microphone quality
The earbuds have a total of 6 microphones for phone calls and call quality was comparable
to the AirPods Pros, which are my benchmark earbuds for call quality.
That is to say they sound really good. Not only did they sound clear in a quiet
environment, but even with the background noise of a simulated coffee shop and with a large gym fan
pointed directly at me - a tough test for any set of earbuds - the numerous microphones did a decent
job of picking out my voice from the background noise. My only very small criticism is they can
sound a little quiet sometimes. Conclusions
The Soundcore Liberty Air 2 Pros sound good and have an impressive range of features. Their ANC
is pretty effective for in-ear earbuds and they handle phone calls, even in noisy environments,
remarkably well. The Soundcore app gets better all the time and allows a huge amount of customisation
with an attractive and easy to use interface. I like their design and build quality,
but I would prefer they were a bit smaller with shorter stems. They are the best fitting stem
based Soundcore earbuds I’ve tried so far, but they’re still not as secure in my ears as the
AirPods Pros or the LG FN series and wouldn’t be my first choice for running or other sports.
I would have liked to have seen some smart device switching like the AirPods Pros have,
but if you mainly use them with just a single device, that won’t be a big deal.
I think their ANC and transparency modes makes them worth the extra money over the Liberty Air
2s - and they have a much more secure fit too - in my ears at least. If you don’t need ANC,
I would consider the LG FN4 or FN6s which are cheaper. If you do want ANC and you prefer a
slightly more discreet design also consider the LG FN7s which have similar ANC and a smaller charging
case, but they’re more expensive and have inferior call quality - if that’s important to you. I’ve
reviewed most of these earbuds so take a look at the on-screen cards or the links down below.
But I’d love to know what you think? What features are important to you? Do you like the design and
which earbuds did you think sounded best? And as always, if you have any questions,
please ask - I read every comment and will do my best to respond.
I do hope you found this video useful. Please like the video if you did. I’m releasing videos every
week on the latest technology and how to get the most out of it, so please make sure you subscribe
- it helps more than you think. And don’t forget to tap the bell icon if you want to get notified
as soon as a new video gets uploaded! Thanks for watching!