Anyway so to take off this rear tire, you have this metal clip.
You have this washer right here and then you have another….sorry, this nut right here
and then another washer inside of this wheel that we’re going to have to break loose
in just a second.
And then as far as the exhaust goes, with my bike, before I can slide the tire off I
need to replace…or I need to remove the exhaust pipes.
So I’m going to undo this nut here and then this Allen bolt here and this Allen bolt here.
I’ve already taken those off so now this should be loose enough to just slip off of
the exhaust.
So before I put this bad boy back together I’m going to take some grease and get some
grease on this back axle.
Just kind of put a thin layer all the way around it.
Not too thick because a lot of it will scrape off when I put the tire on anyway.
There you go.
So now we’re going to take this right here and stick it on first.
Then this guy.
And we’re going to tighten it down all the way.
We got to get it on far enough that it’s tight and holds the wheel straight and then
we also have to be able to put this cotter pin all the way through so it sticks in.
I’ll show you.
So this little pin...there’s a little hole right inside of there that this needs to attach
onto.
It goes right through.
Anyway, it’s on there.
So I’ll put a list on the video description of everything that you’ll need to do this,
like the stand, the ratchet size for this, the tires…the tires are really cheap on
Amazon so I’ll post a link to those.
There you go.
Got the back tire in place, the exhaust back on.
Everything’s good to go.
Anyway, if you have any questions make sure to leave them in the comments.
Don’t forget to subscribe and “like” if this video helped you.
Thanks for watching!