Hi my name is Jason with Mt. Baker Mining and Metals
and today we are going to be demonstrating one of our new products for 2018.
This is a 6 inch by 30 inch wide jaw crusher
and we developed this product specifically for the granite industry
but we are also finding that it is real appealing to the asphalt and concrete guys
and also panel glass
and pretty much anything long and skinny that you need a wide crusher that's not real thick
that you can feed a large slab down into
and get a nice 1" or 3/4" product
so here is some of the samples we gonna do today
We have two different samples of granite
this is a natural stone product here
we also have some of this man made quartz product
this lighter colored stuff
as well on the far side we have some slabs of concrete we are gonna run through
Here are the results of the natural stone test through the jaw crusher
This is about a inch and half minus crushed
this is what the customer wanted.
This crusher can go up to about 2"
or all the way down to about a 3/4" minus discharge
and we estimate here we have about 400lbs of granite that we crushed
took us about a minute and I couldn't keep up with the crusher
I could barely get things in as fast as it was crushing.
We can conservatively figure at this crush we are getting abut 12 tons/hour
so now were gonna run the quartz through and see how that compares
Here are the results of the quartz test we did through the 6" x 30"
and as you can see it still has a nice crush same with the natural stone
it took a little bit longer though, we did the same amount of volume
It took about a minute and a half instead of a minute with the natural stone
it took about 50% longer, the quartz is a little bit harder to crush
but the crusher still did a great job and created a product that the customer can still use
Now we are gonna move onto the concrete sample and see how that one goes.
Here are the results from our concrete sample.
and as you can see the crusher did a great job
made a real nice product
concrete is a little softer than
granite and quartz so it makes them more fine
We did the same amount of volume of the granite and stuff
It took about a minute so we are still in that 10-12 tons/hour range
We are excited to introduce this new 6" x 30" jaw crusher into our product line
and really interested to hear from you guys
about your needs for crushing solutions
Be sure to call us or email us for turn-key solutions for this crusher
and we look forward to seeing you on the next video.
Thanks for watching.