Sponsored by SurfShark VPN. Click on the link in the description and
enter promo code UNDECIDED for 83% off and 3 extra months for FREE!
The biggest roadblock to the widespread, mainstream adoption of electric vehicles is range.
We’re typically seeing 300 miles or less for most EVs on the market,
which is more than enough for daily driving, but still not enough to put range anxiety to rest.
Because of a battery packs incredible weight, there’s a balance that EV makers have to find.
Less weight means less energy needed to move the car, but also less overall range.
Add more battery to get more range and you’ve increased the weight and amount of energy
needed to move. But what if we could take some of that weight out of the equation?
Imagine a car that has no battery pack because the car’s structure
is the pack? Let's explore "massless" energy storage and how a recent breakthrough could be
a dramatic shift in how we can store energy in phones, planes, cars... you name it.
I’m Matt Ferrell ... welcome to Undecided
A team at the Chalmers University of Technology in Sweden has successfully created a battery with
carbon fiber as a structural electrode. What this means is a battery that can act as actual
structure for a device. There’s no separate battery pack when the structure itself is the
pack. But a structural battery isn’t exactly a new idea. This breakthrough is different,
but to understand why it has so much promise let’s take a quick step back.
This concept is widely used in aerospace applications, in which weight is a major
driving factor. On passenger planes, for example, fuel tanks are usually integrated
into the wings, and even when there are also tanks inside the aircraft's body,
the wing tanks are used primarily.
There are a few types of Aircraft Fuel Tanks, but on many aircraft,
especially in transport and high-performance aircraft, part of the wings or fuselage structure
is sealed with a fuel-resistant two-part sealant to form a fuel tank. With the lowest weight,
the sealed skin and structural members provide the highest volume of space available. The tank is a
unit within the airframe structure, which explains the pretty obvious name, "integral fuel tanks".
It’s a fascinating approach that provides several benefits. It reduces the stress on the
wings during takeoff and flight by putting the heavy fuel directly inside the source of lift.
On top of that, using the wing itself to store fuel is a very efficient use of space.
It’s too narrow to be used to store any significant amount of cargo, so why not?
And then there’s safety. If there’s some kind of ground fire,
passengers have evacuation options since the fuel is isolated from the fuselage,
and if the fuel pumps break or a fault occurs, the engines will still be fed with gravity.
In current electric cars, the battery cells add significant weight, require a special
pack structure and protection from impacts, and in most cases they aren’t used for any
load-bearing function in the overall structure ... yet. With the aim to solve those problems,
at Tesla’s Battery Day event last year they not only unveiled a new 4680 battery cell,
but also a new battery architecture built around the new cell. A "structural battery".
In order to bring this approach to EVs, Tesla decided to build a battery pack that
acts as body structure, linking the front and rear underbody parts. In this case,
there's no separate battery pack because the car’s bottom side is the pack.
Currently, Tesla builds battery packs by combining cells into modules, modules into a battery pack,
and then the battery pack is installed into the base of the vehicle platform.
In this new concept, Tesla isn’t using modules. Instead, it’s building the entire battery pack as
the structural platform of the vehicle, with the battery cells glued into the sandwich, and helping
to join the platform as one big unit. This new design reduces the number of parts and the total
mass of the battery pack, so that less energy is needed by the EV, which can increase the range of
its vehicles. They believe that the the structural battery can reduce overall vehicle weight by 10%
and increases range by 14%. This goes right back to what I said at the beginning about
EV makers trying to find that perfect balance between weight and the energy needed to move.
Elon Musk said:
“Battery pack will be a bonded structure with cells providing shear transfer
between steel upper and lower face sheets, eliminating most of the center body parts
while providing better torsional rigidity and improved polar moment or inertia.”
And that brings us back to the research breakthrough that’s taking this to another level.
But before I get to that, I’d like to thank Surfshark for sponsoring today’s video.
I always recommend using a VPN when using public Wifi, but VPNs can be very useful even
when you’re home. A lot of online services use some pretty sophisticated commercial targeting
and tracking ... a VPN can protect you from that. SurfShark’s CleanWeb does a great job
blocking ads, trackers, and malicious websites making it safer to use the internet even at home.
And you can even make it look like your IP address is coming from a completely different country.
This can come in handy if you want to stream a video
that’s only available from a specific location.
One of the best parts of SurfShark is that it’s easy to set up on all your devices,
whether that’s iPhone or Android, Mac or PC. SurfShark is the only VPN
to offer one account to use with an unlimited number of devices.
Use my code to get 83% off plus 3 extra months for free! SurfShark offers a 30-day money-back
guarantee, so there’s no risk to try it out for yourself. Link is in the description below. Thanks
to Surfshark and to all of you for supporting the channel. Now back to the research breakthrough.
A team at Chalmers University of Technology in Sweden has successfully used carbon fiber
as a structural electrode. For several years, they’ve been studying the relationship between
carbon fiber’s microstructure and electrochemical capacity.
Their structural battery contains a multifunction carbon fiber that works as a conductor, electrode,
and load-bearing material. This latest advancement may lead to
essentially “massless” energy storage in vehicles and other mobile technologies.
![](https://scitechdaily.com/images/Massless-Energy-Storage-in-Vehicles-777x353.jpg)
Since 2007, the scientists have been attempting to develop a truly structural battery, but it's been
challenging to produce batteries that have both outstanding mechanical and electrical properties.
But now, the Chalmers University's team,
in association with KTH Royal Institute of Technology that’s based in Stockholm,
have taken a big step forward. The new battery has properties that go beyond anything that’s been
seen yet for strength, stiffness, and excellent potential to chemically store electrical energy.
According to the researchers, the performance of this battery is 10 times more than the
previous versions of structural batteries. But there's something important to note
about its energy density. It’s only at 24 Wh/kg, which they acknowledge is around 20%
of the capacity of comparable lithium-ion batteries available today.
While that might sound like a drawback at first, less energy will be required to drive
an electric car since the vehicle's weight can be significantly reduced.
Instead of needing to integrate so many cells into a skateboard of an EV, like the method of
filling the cavity of a wing with fuel, you could have panels of a car that *are* batteries. It’s
not a separate panel hiding a battery, but it’s the battery itself. So the weight of the panel,
which you’d have anyway, is now also providing a certain level of energy storage too.
Taking the Tesla model S as an example, its 85 kWh battery accounts for 25%
of the total vehicle weight, which is considerable. And while the Chalmers’ battery,
which is still in the research phase, doesn’t have the same energy density, at some point you
could potentially offload a lot of that energy storage capacity to the structure. We don’t
necessarily need the same 300+ Wh/kg that Tesla has today, but if it gets close enough -- along
with high enough voltages -- with the weight savings, it could make it a viable option.
In addition, the new carbon fiber battery’s design has an increased stiffness of 25GPa
(similar to many construction materials) and a tensile strength exceeding 300MPa,
which gives it excellent rigidity. The higher the stiffness the less likely something is to
undergo elastic deformation, which means how something deforms non-permanently.
Leif Asp, Professor at Chalmers and leader of the project said:
“Previous attempts to make structural batteries have resulted in cells with either good mechanical
properties, or good electrical properties. But here, using carbon fiber, we have succeeded
in designing a structural battery with both competitive energy storage capacity and rigidity.”
The new structural battery features a positive electrode composed of a lithium
iron phosphate-coated aluminum foil and a negative electrode made of carbon fiber.
These electrodes are separated by a fiberglass fabric, in a matrix electrolyte.
Consider a possible application of the 24Wh/kg battery
to the [Calin Gologan’s Solar Elektra One Electric
Airplane](http://sustainableskies.org/pc-aero-introduces-solar-elektra-one-solar-trailer/) that was
introduced in 2012. The plane was 1/3 structure, 1/3 batteries,
and 1/3 payload including pilot. Each third was 100 kilograms (220 pounds).
Being able to replace half the structure with Chalmers’ structural battery material,
50 kilograms (110 pounds) of the airframe would be capable of storing 1,200 Watt-hours,
shaving 4.6 kilograms (10.1 pounds) from the battery weight. Although it doesn't
sound like a big number, reducing 1.5 percent of the total weight can make a big difference.
Chalmers researchers expect up to three times the energy density for future
products, so the 1.5% weight reduction of the last example could be turned into something like
4.5%. And if those structural panels were also solar panels ... you get the idea.
But there is a possible downside to structural batteries, and something I’m
sure some of you where thinking about and possibly commenting on already.
What if the structural pack or battery are damaged in some way, like a collision?
A recently published patent for Tesla’s structural battery pack not only discusses cost reduction
and range improvements of its next-generation batteries, but also how the structural battery
packs could help keep -- if not improve -- its vehicles’ safety.
According to the patent, the bottom of the battery pack could be manufactured with a strong and rigid
material that would also intentionally deform if it was involved in a crash.
The structural battery pack patent also pointed out how parts of the integrated energy system
are designed to allow gasses to escape from the battery in the event that a cell becomes damaged.
The section from Tesla’s structural battery pack patent affirms:
“In one embodiment, the bottom layer is made from a material that has sufficient stiffness and
strength to support the battery cells and react mechanical loads from normal vehicle operation,
but also can deform in response to a road strike
from below that would otherwise cause failure in the battery pack system.”
If the safety benefits of structural batteries mentioned in Tesla's patent can really come true,
it could make some of the safest cars on the road even safer.
Getting back to the Chalmers University of Technology, although they’ve succeed
in creating a structural battery ten times better than all previous ones,
the researchers didn't choose the materials to try and break records. Instead, they wanted
to investigate and understand the effects of material architecture and separator thickness.
This is pretty common in battery research. They test one specific aspect,
get results, adjust, and test something else next. It’s a long, tedious process.
This research got the interest of the Swedish National Space Agency,
which is funding a new study on the performance of the structural battery and how it can be improved.
In the positive electrode, the aluminum foil will be replaced with carbon fiber
as a load-bearing material, providing both increased energy density and stiffness.
On top of that, the fiberglass separator will be substituted by an ultra-thin variant,
and should also show faster-charging cycles. It’s expected that the new study will be
concluded in less than two years ... like I said ... battery research is a long, tedious process.
In the end they believe that this battery can reach a stiffness of 75 GPa
and an energy density of 75 Wh/kg. That would make the battery almost as strong as aluminum,
but with lower weight, as well as increased safety.
But when might we see these structural batteries on the market? Tesla is expected
to use 4680-format cells in the Cybertruck, which will be built alongside the Model Y in Texas. And
the Chalmers’ battery is still a LONG way off from production, but it shows a clear sign of
where batteries may end up. Just imagine electric bikes, EVs, and portable devices being powered by
massless structural batteries like this. If they can deliver, there’s a huge amount of potential.
Do you think massless/structural batteries will have a long-term impact? Jump into the comments
and let me know. If you liked this video be sure to check out one of the ones I have linked
right here. Be sure to subscribe and hit the notification bell if you think I’ve earned it. And
as always, thanks to all of my patrons. Joining my Patreon membership really helps to support the
production of every video. You also get access to each video early and without ads, I hold
monthly Zoom calls for higher level members and producers, there’s a private Discord group, and
you can help influence what topics are covered. Go over to patreon.com/mattferrell to learn more
(I’ve also got a link in the description). And even if you aren’t a Patreon supporter, you’re
doing something awesome ... watching. Thanks so much. I’ll see you in the next one.