Hey everybody! Today we're gonna look at the setup and pitching instructions for
the Luxe Minipeak - with the additional and available 1-person mesh inner tent,
as well as the option of using just a groundsheet with the outer tent. Your
first step is going to be to spread out your tent and use the provided stakes to
stake out your four corners. Make sure that your corner nylon loops are loose,
once the center pole is inserted into the tent, you will have the option to be
able to tension each corner to give you the ideal pitch for the tent, once each
corner is staked out you will use a trekking pole that will extend to 135
centimeters or an available accessory poll from Luxe Hiking Gear. To insert the
center pole, unzip one of your doors,
and with the handle up to the center of the tent, insert the pole and extend to
that 135 centimeters,
once your center pole is inserted, go ahead and zip your door go ahead and use
the nylon straps in each corner, to create better tension and pitch on the
tent, once your four corners of tension and good to go you will then take and
stake out each side, and at this point stake out your door, the last thing that
you will do to finish your setup is, un-velcro your vent pull the stiff rod down,
with the included velcro to be able to pull out your vent.
The last thing you would do to adjust the pitch of your Minipeak, is to adjust
the position of the center pole to the ideal height. If using a groundsheet
only when sleeping with your Minipeak, open up the door to the side of the tent
you wish to sleep, and spread out your groundsheet the tent will give you
plenty of head and foot room to be able to sleep somebody over 6 feet tall, the
groundsheet that you are looking at here is just under 7 feet in length, to
set up the 1-person inner mesh tent spread out the tent on your desired side
of sleeping, with the zipper facing in toward the center of the tent, and at
each corner you have a hook,
to be able to attach each corner to the body of the tent, this can be done from
the inside of the tent or from the outside of the tent, once your four
corners have been connected to the body of the tent, take your center hook and
attach it to the peak of the tent, and use the line lock to adjust the height
and totnes of the inner tent. Taking a closer look at attaching the center to
the peak loop and adjust your tension.