hello everyone so we have a Maytag refrigerators that's what they call the
French door refrigerators with the top and bottom so here is a problem when I
press the power this is what it does. all that lights go ON. the
refrigerator is now not working any of this button and I press this is what
happens. so that except the door which works with this nothing else work even
if it says hold it for three second it doesn't worked.
I checked online and I check that documentation on everything about about
the refrigerator and I came to conclusion that the control board which
is located at the back here needs to be replaced. so when I turn it on the motor
the compressor the plan here nothing works
everything is just silent. so which means the power is not not deployed for these components.
because of some error in the board. so let's disconnect the power. make sure
that you need this tool and you 1/4" socket I just put an
extension to make it longer. so I removed the bolts. using a screwdriver just
press here remove this piece. so now this is removed. this is the board okay
I already purchased the board so I'm going to show you next so I press s
remove one piece the other piece remove this piece also press and hold and pull.
that is done. to remove the board so we need
to press this up okay so using a screwdriver just press here down and now
the work is up and also using the screwdriver up here this can be pulled
up so this is now now you just pull it like that. the board is removed.
Sorry. I missed to film to show how board was inserted. But just do the reverse of removing it.
Insert the board and connect the cables.
When done. Connect the power cable to the wall.
okay so as you can see here it says PEO 000 that I was just reading online about
it so it needs programming. so the instruction is coming now on the screen
or I'm doing it so the first thing is that we need to have the code which is
located inside the refrigerator when I open it so this is a code you can see
where it says code this is 1720.so in each fridge you will have a different
code. okay. so this is inside the right door at the top leaving your fridge if
somewhere else so that's what we need to press alarm, and press this down
and then release now it's in programming mode.Press down once more now we see that the
decimal point here. the decimal point here. so now with this one we go to 1 okay now I
press UP key, the decimal point is here now I make this seven seven now press this up
two and then go up and zero everything is complete until press this down until
flashing okay. Press a key to exit.
existed press any. Okay so now now the temperature is set and the
freezer is now working. so water is working everything is good the
programming is done. thank you very much guys I hope you enjoyed this video
please don't forget subscribe
you