If you have any questions about your TV repair, please leave a comment, in the comment section
below this video. Be sure to include your TV brand, TV model number and the symptoms
and problem that your TV is showing. This information will help us to best diagnose
the problem with your TV and suggest a fix. We will reply to your message as quickly as
we can. After we reply to your comment, you should receive a notification in your email
account. Be sure to check the social and promotion tabs and the SPAM folder in your email. Thanks
and we look forward to assisting you on your TV repair journey.
In this video we are going to show how to replace the main board in this Vizio E601i-A3
model. We will go over the boards in the TV. Here we have the main board, this takes in
all your inputs, so it has your HDMi, RCA connections, VGA, Tuner connection and everything
there. So this is your main board here, this cable here goes over to the controls on the
side of the TV, where you can turn on your TV, or change the channel. This cable here
runs to the power supply board, these two LVDS cables run to the T-Con board, which
is right here. These wires go to the speakers. Over here we have the power supply board,
it has one cable here that goes to the main board. Then here it has one cable that goes
to the panel and here a connection that goes to where you plug in the TV. That is off the
camera shot. Down here we have the T-con board. The T-con
board has the two LVDS cables that go to the main board and then we have two ribbon cables
here that go to the panel. In order to replace the main board, we will
want to start by disconnecting all of the cables on here. We will now show a close-up
to see how to disconnect them. Disconnect all of these cables and connections and then
remove the screws that hold this main board to the panel.
Pull these connections out. Be very careful with the LVDS cables as they are very fragile.
So we have disconnected all of the connections, now we will go ahead and remove the screws
that hold the board to the panel. We have removed all of the screws and now
we will pull the board off the panel. Then you can put your replacement board in the
exact same location that you just removed your other board. Then we will put the screws
in to attach the main board to the panel. Then we will reconnect all these cables and
connections. Pinch in on the side of these LVDS cables. Push them in tight. There you
have it, we have replaced the main board for this TV.
Thank you for watching one of our many tutorials here at Shopjimmy.com.
We strive to learn and share new TV Repair
tips everyday, subscribe to our YouTube Channel and grow with us, share our videos with your
friends to help us spread the savings, and don't forget to hit that like button.