HOW TO TIE THE DOUBLE UNI KNOT: Hello everybody.
Welcome to Fishthatwontquit.
Today I'm going to show you how to tie two lines together using the
Double Uni Knot.
The Double Uni Knot is a great knot you used to tie braided line to monofilament
or braid to fluorocarbon... and really if you're trying to tie two lines together,
the double uni knot is a great way to do it.
It's a very easy knot to tie.
So in this demonstration, I have my yellow line,
is my braided line, and I have a green monofilament here.
So we will do is run these tag ends opposite each other and
line them up with each other.
Just like so.
I like to start with my braided line first.
So with my left hand I'm going to go ahead and pinch off both lines here.
You can lay the monofilament out on the table there to your right.
And what you're gonna do is take your tag end of
your braid, and make a loop with it, and then lay it right on top of both of
the lines and then pinch that with your left hand.
So now you're left with is the two lines here... your loop you just
created... and your tag end.
So with your tag end, you're going to run that through
the loop around these two lines and with a lighter line I like to do six to ten
wraps and with a thicker line four to six wraps.
In this case it's a little lighter so I'm going to go at six wraps.
So the first one is going to go through the loop around the two lines for, one...
two... three... four... five... and six.
So now you want to lubricate this section of the knot here
and hold on to that tag ends the whole time.
And with the tag in you're gonna pull that and keep tension on the right
side of the monofilament and also on the left side.
It will help this knot form a little bit easier for you.
Just like so.
You have the first half of you're knot done.
And the second half is really just doing the same thing on the other side.
Now you'll have the main part of your braid you'll
lay on the table.
You'll have the monofilament tag end here, coming out of
the knot you just create it here.
Now sometimes you'll need a little bit more
of this tag end to work with.
So you can hold on to the knot and pull a little
bit out so you have something to work with here.
And we're gonna do the same thing on this side.
So, create your loop and then lay it right on top...
pinch with your left.
You're gonna run this tag end around both lines here and
through your loop.
We are going to go with six on this side as well.
So you get one... two... three... four... five... six.
You'll want to lubricate this section of the knot as
well.
And same as before, keep ahold of your tag end.
Keep tension on the left and right side and slowly start pulling
that knot together.
Now it's okay if this doesn't set fully right here as the next
step will help set this knot for you.
So what you're going to do is take the
right side, the main part of your braided line.
On the left side, the main part of your monofilament line, and you're going
to want to moisten up the middle section between these two knots.
Okay and now pull the knots toward each other.
You'll see the monofilament will set itself
there, and then you'll have two tag ends here in the middle you'll cut off.
And the closer to the knot you can cut these, the better.
As it will help with the knot sliding through your guides on your
fishing rod.
Just like so.
And what you're left with is a completed double uni knot.
Thanks for watching!
I hope that helped.
If you have any questions go and comment and if you
liked the video, leave a like down below!
I hope to see you soon.
-FTWQ