there's something hey guys EBPMAN here and in today's video I'm going to show
you how to install a tempered glass screen protector for your iPad 11 or 12.9 pro this is the 2020 version
this video I'm gonna show you how to get a flawless installation of the tempered
glass screen protector from super shield for the iPad pro and this will work for
the iPad 11 or 12 point 9 so let's get right to it make sure you hit the
subscribe button and tap the little bell icon to get notified when new videos
become available now before doing the install of the tempered glass screen
protector from super shields let's take a look at some of the features we have
here so first of all it's gonna be anti fingerprint so it's not gonna absorb as
many fingerprints or show as many fingerprints as the standard glass has
on your iPad it's going to be clear it's real glass it's gonna not sacrifice and
sensitivity and it's gonna give you some protection and it also has this coating
that's going to keep smudges grease a lot of the stuff that happens and day to
day usage away from your iPad so let's check and see what's in the box now the
neat thing about this kit is that it does come with two protectors so you
with each protector you get your glass protector and you get a microfiber towel
as well as installation kit what I like about this is that over time if you do
crack your screen protector you have to and it's gonna be really easy to replace
now I've had screen protectors out of my iPad since I've had iPads and I've used
super shields for a very long time they're extremely durable and to crack
one of these you really would have to hit it pretty hard and it's going to
really deflect the impact of anything hitting your screen I've never ruined an
iPad screen because I've always had the screen protector so let's go take a look
at all these pieces and I'll show you how I install mine now before installing
our tempered glass screen protector we're gonna wipe down the screen so I'm
going to take out this alcohol prep wipe and we're gonna wipe down the screen now
even if this is a brand new iPad you want to wipe it down so I'm gonna go
ahead and do that and then just get everything really good make sure you get
all the corners and if you've been using one it's important to do this because
this is going to remove any kind of oils anything that's gonna prevent the
adhesive from working and then I'm going to take the microfiber towel and I'm
go over it and then this is just gonna remove you know any kind of smudges I
would say it almost polishes your surface now as we're doing this a couple
things that you'll want to make sure you have no central air no central heat no
fans going you don't want to have anything moving around in your room
because if you do you're gonna pick up some type of dust particle underneath
your screen so once everything looks good and I think it does I'm gonna bring
over my glass protector and just inspect that so next we're going to install our
glass screen protectors so here I have my screen protector you can see how it
looks right there and what I'm gonna do is I'm gonna first start with this tab
right here I'm gonna pull this off right and let me make sure I have it in the
right place yet I'm gonna flip this around like this and I'm gonna pull it
this way and as I put it this way I'm gonna first align it on top and I'm
gonna work my way down so watch how I do it now one tip as you're installing the
screen protector make sure you don't pull so if you have to adjust it you
have to readjust it raise it from the screen and then replace it if you pull
the adhesive that's on the screen is gonna come up and then you'll have some
bubbles so again if you have to replace it because the alignment is off
lift up do not pull forward or back to try to adjust it lift it up okay so
let's go ahead and try it alright so what I'm going to do is I'm
going to take the screen protector film remove a portion of it not all of it and
flip it just like this and then I'm going to start from the very top my
alignment and I'm really looking to make sure that everything in lines nicely and
I'm gonna work with what the corners first it's really important for me to
have things straight I'm kind of really particular as I look at this stuff so
you're not gonna see my full iPad you're just gonna see the area that I'm working
on first so what I'm doing is looking my alignment and then because I have the
plastic I'm still available and you I'm gonna bring this back at the site you'll
notice how I have it right here it's gonna give me the ability to really work
on my alignment and what I like to do is I like to lift and I like to align just
to make sure that it's like exactly where I want it so I'll run my fingers
here on the side like this just to make sure that this feels like it's straight
and then I'll do the same thing right here and I will inspect this a couple
times to make sure there there isn't anything there now once I'm happy with
the alignment what I'll do is I'll put one finger here and then I'll start
removing the plastic that I have on the bottom this way and then the glass will
rust alright so I think I'm satisfied with my alignment you can see that
things look really good right there so what I'm going to start
is I'm gonna start peeling back the actual film and as I'm pulling it back
you'll notice how the screen protectors already starting to stick you see notice
how there's two tones here this is darker and this is lighter it's because
this area has already sat on top of the glass so I'm just gonna be gonna review
my screen by running my fingers through the side like this and then what I'm
gonna do is I'm gonna hold this side right here and pull the rest of the
plastic out now once I remove all the plastic I'm still not gonna rest it
because you notice how it's already starting to stick I'm checking my
corners because I want to make sure that my corners are nice and checking this
side and this side and I'm gonna just watch how this is working I'm gonna let
it go down you can notice how it's starting to close or at least the
adhesive is going in you can see how it's doing this and you notice that
there's no specks right so I'm checking this out and things look good so far you
could see that on screen I think the alignment I'm happy way so what I'm
gonna do is I'm gonna let it go now and you can see how it's gonna go all the
way through and it's going to seal boom done
so you notice key here is your alignment making sure you have the right alignment
once you have that alignment and again you're using your fingers on the side
like this it goes down and it's pretty straightforward so let's power it up and
see what it looks like now well the iPad starting up let's take a look at how the
install looks so I'm gonna put it here in an angle for a second and you'll
notice how things are here nicely aligned which is gonna be important
because as I put a case on this I want to make sure that the case itself
doesn't really butt up against the glass all the way around everything is nice
and spot-on and let me go ahead and log into it alright and again this is a new
iPad so everything is responsive there's no impact with clarity and again this is
going to be a case friendly screen protector so that's all it takes so let
me know what you thought about that install how easy it is and I'd love to
hear from you in the comment area below