Ugh, I wonder [? realizes ?] that this entire class
pulled an all-nighter to study for this dang test?
Wait.
Seriously, this is only one-sided?
OK, that's D. Oh, this is easier than I thought.
I'm done?
If you finish early, you may sit quietly.
Oh, thank god.
[WHIP CRACK]
[MUSIC PLAYING]
[WHIP CRACK]
[MUSIC PLAYING]
Hey guys!
It's Rachel!
I decided it'd be fun to do some strange DIY school supplies.
But more excitingly, guess what?
It's back to school time, so I decided it's time
to do a back to school giveaway.
I'm giving away a MacBook Air.
The only rule for this giveaway is
that you must be subscribed, because I
want to give back to my subscribers for back to school.
If you're already subscribed, then you're
already automatically entered.
This giveaway ends on August 30th
is when I'm going to announce the winner.
Also let's see if we can get this video to 200,000
for back to school supplies.
And comment below which school supply is your favorite.
Let's get on with this video.
For this first one, you'll need a plain white backpack
and blue and red Sharpies.
And a stick or something to make sure
that you draw straight lines.
Draw a straight blue lines horizontally
across the entire backpack and leave about an inch
and a half of space in between.
Now take a red Sharpie and draw a long vertical line
across the entire backpack.
Don't forget the little top flap if you have a top flap.
[MUSIC PLAYING]
This next DIY, you need a notebook and a pool floatie.
Pool floaties are legitimately the perfect size
to fit in a notebook.
So there's a little part of the pool floatie
that won't get affected if you cut it.
So just cut along that line.
And since it's still too big, cut the top floatie off
and then it fits perfectly.
Then take some maximum strength glue and glue
the heck out of that floatie onto the notebook.
Press it down with a Q-tip so you don't get glue on yourself.
And then once it's dry, just blow it up and bam,
you got a pillow notebook.
For this one, you need a rotary cutter.
So make sure you have a parent help you.
It's very dangerous.
You could cut yourself.
And then take a flash drive.
Take the flash drive apart like this.
Measure up how long the eraser needs to be cut
and then cut the top off.
And then measure how big the hole needs to be and then
draw lines around it.
And then just carve out a hole so
that the flash drive will fit.
And then do the same for the other side,
but you just need a thin line to get the ends through.
And then bam, you have a flash drive eraser.
[MUSIC PLAYING]
This one's good if you have empty products.
Take your nail polish and then take the brush off, and then
take some nail polish remover.
Clean out the top and the inside of the nail polish container.
Just the bottom though.
And then take a highlighter and get the bottom piece off.
You can usually just bite it off or something.
And then take a rotary cutter.
Cut along the top.
Keep doing that until it pops off like this.
Measure to see how much ink you need
to cut off, but make sure you don't cut off the side
with the hole in it.
And take some glue and glue it to the inside of the nail
polish container.
Now take the top and pop it in right in, and you're done.
For the lip gloss, just take the rubber stopper out
and then clean out the inside of the lip gloss with a Q-tip.
Take the brush part off with a tweezers.
You'll need a marker.
I used a mini marker with this.
And then just take the inside out and cut the top off
like you did with the other things.
And then glue it inside the lip gloss container, and then
glue a little bit around the top too and then just stick it in.
Just fold a plain white t-shirt in half
and take a circular object and make a circle and cut it out.
Take the circle apart, glue around it,
and then put the other half of the t-shirt back on.
And if you want, you can glue it down like this
to make it more steady.
Then take transfer sheets and Google
some pictures of whatever.
I'm going to do pizza and emojis.
And just make sure you have a transparent background
of a circular object and then print it full size
to fit the whole page.
Make sure to print out two pictures to put on both sides.
[MUSIC PLAYING]
My life!
[BEEP]
It's not even printing anything!
[BEEP]
I am so done.
[MUSIC-SARAH MCLACHLAN, "ANGEL"]
[WHOOSH]
Cut the picture out and iron it down the opposite direction.
Once it's cooled down, just peel it off.
Cut two little holes inside the middle of it,
so that you could fit your pencils in just like this.
And do that for the rest of it too.
Now you could use Velcro, but I prefer a magnet.
So just take some adhesive magnets
and stick them onto the opposite ends of this.
Let me know in the comments below which
DIY is your favorite.
So I hope you guys enjoyed this video.
If you haven't seen my previous two videos,
click those down below.
And subscribe right over there if you're not
subscribed already.
OK, bye!
I love you so much!
[KISS]