WELL WHATS GOING ON HERE WHATS GOING ON HERE
I WANTED TO SHOW YOU GUYS A VERY ECONOMICAL
WAY TO CLEAN FUEL INJECTORS YOU CAN DO THIS FOR
TOYOTA HONDA LEXUS ACURA SUBARU KIA
HYUNDAI ANY FUEL INJECTOR YOU NEED TO HAVE
UNCLOGGED THIS FUEL INJECTOR IS OUT OF A 2007
ACURA TL BUT THIS WILL WORK FOR ANY FUEL
INJECTOR FIRST THING YOUR GOING TO NEED IS A
CAR BATTERY FULLY CHARGED CAR BATTERY
YOUR GOING TO NEED SOME CARB CLEANER CHOKE
CLEANER THIS IS FROM GUMOUT ALL THIS STUFF
THIS IS FROM O'REILLY O'REILLY AUTO PARTS
YOUR GOING TO NEED A 2 INCH LONG TIRE VALVE
STEM YOUR GOING TO NEED SOME ALLIGATOR CLIPS
YOUR GOING TO NEED SOME SUPER GLUE
YOU NEED TO USE THE CAP OFF THE END OF THE
VALVE STEM SO DON'T LOSE THAT YOUR GOING TO
NEED SOME DRILLS DRILL BITS I SHOULD SAY
A DRILL
AND WE'LL GET ROCKING AND ROLLING YOU'LL ALSO
NEED THIS STRAW OFF THE
OFF THE BOTTLE OF CARB CLEANER
DRILL THE HOLE FOR THE STRAW ON TOP OF THE
VALVE STEM OR THE COVER FOR THE VALVE STEM
IM GOING TO BE USING THE 5/64 3/32 DRILL BITS
SO IM JUST DRILLING THIS HOLE TO MAKE ROOM
FOR THE STRAW IT ALSO DOES NOT NEED TO BE DEAD
ON BUT WE'LL TRY TO BE DEAD ON
ALRIGHT THERES ONE LET ME SEE IF THIS STRAW WILL
FIT I DON'T THINK IT WILL BE BIG ENOUGH
ILL PROBABLY HAVE TO TAP IT A LITTLE BIT
BIGGER
NOPE
IT NEEDS TO BE A LITTLE BIT BIGGER
MAKE THIS HOLE A LITTLE BIT BIGGER
YEP IT FITS NEXT THING WE'RE GOING TO DO IS GET A
LIGHTER AND HEAT THIS END UP AND THEN HAVE
IT CURL OVER A LITTLE BIT AND HAVE IT STUCK ON THE
INSIDE OF THE VALVE STEM HERE YOU ONLY NEED TO
HOLD THIS HERE FOR A SECOND
LET IT MELT JUST A LITTLE BIT
IT'S MELTED
I'M BRINGING IT DOWN IN IT KIND OF ROLLED BACK
THE STRAW ROLLED BACK AND NOW I HAVE IT STUCK
ON THE INSIDE OF THE VALVE CAP
YEP I HAVE AIR THROUGH THERE
TAKE MY SUPER GLUE AND SEAL THE TOP OFF
SO I HAVE A TIGHT TIGHT FIT SO THE IDEA IS
TAKE THE END OF THE STRAW PUT IT INTO THE
SPRAYER RIGHT HERE PUT THE OTHER END ONTO THE
VALVE STEM AND WE'LL START CLEANING THIS
FUEL INJECTOR
SO NEXT THING YOU NEED TO DO
INSIDE THE VALVE STEM THERE'S A ONE WAY CHECK
VALVE
LOOKS LIKE THIS RIGHT HERE
SO YOU NEED TO GET THAT OUT
THEY SELL SPECIAL TOOLS BUT YOU DON'T NEED
SPECIAL TOOLS TO GET THIS THING OUT
RIGHT DOWN THERE YOU CAN SEE THE VALVE
STEM I JUST USED A PICK IT'S RIGHTY TIGHTY LEFTY
LOOSEY IN THERE JUST STICK THE PICK DOWN IN HERE
AND YOU TURN IT I'M TURNING THE VALVE STEM
YOU JUST WORK IT OUT YOU DON'T NEED THAT
SPECIAL TOOL BUT IF YOU HAVE THE TOOL FOR TAKING
OUT THE VALVE STEM IT MAKES IT THAT MUCH EASIER
BUT YOU CAN DO IT WITH A PICK PROBABLY DO IT WITH
A FORK JUST ANY PIECE OF METAL THAT WILL GET
IT FREE AND CLEAR SO THIS ONES FREE AND CLEAR
IT'S GOT A HOLD ALL THE WAY THROUGH IT
NEXT WE'RE GOING TO DO
SO WE GET THE THE VALVE STEM THAT'S OPEN
ALL THE WAY THROUGH WITHOUT THE
CHECK VALVE IN THERE THIS IS GOING TO BE A
LITTLE BIT TIGHT BUT THIS IS VERY PLIABLE RUBBER
IF IT'S A LITTLE BIT TIGHT YOU CAN GET SOME
OIL AND PUT IT DOWN IN THERE
YOU JUST SHOVE THE INJECTOR DOWN IN THE
VALVE STEM
YOU TAKE THE
CAP STEM WE CREATED
SCREW IT ONTO THERE
NOW YOU TAKE THE END OF THE STRAW
PUT IT INTO THE CARB CLEANER
NOW WE TAKE OUT TINY LITTLE ALLIGATOR CLIPS
THAT WE'RE GOING TO PUT INTO THE CONNECTORS
ON THE INSIDE OF THE FUEL INJECTOR
GONNDA LEAVE THOSE CONNECTED
THAT OPENS IT WHEN IT'S ENERGIZED IT OPEN
WHEN IT'S NOT ENERGIZED IT'S CLOSED SO AS I
ENERGIZE THE FUEL INJECTOR
I'LL SPRAY DOWN ON THE CARB CLEANER
I GUESS IF WE HAD SOME TIME WE COULD HAVE
EPOXIED THIS
BY THIS IS THE PRINCIPAL
THAT'S HOW YOU DO THIS
(MUSIC)
SO THERE YOU GO
THAT'S HOW YOU CLEAN A FUEL INJECTOR
USING GUMOUT SEAFOAM
CARB CHOKE CLEANER
A BATTERY SOME TIME SOME PATIENCE
IF YOU HAVE FOUND THIS VIDEO HELPFUL
PLEASE CONSIDER SUBSCRIBING TO
BUNDYS GARAGE ON YOUTUBE
QUESTIONS COMMENTS CONCERNS YOU CAN REACH
OUT TO ME A BUNDYS GARAGE AT GMAIL DOT COM
YOU CAN FOLLOW ME ON TWITTER
AT BUNDYS GARAGE
AND LIKE ALWAYS
ILL KEEPEM ROLLIN FOR YA