Hi guys, assalamualaikum warahmatullah barakatuh, see you again with the Black Builder ID channel again,
a reference channel for do-it-yourself, my friends, how are you today, I hope you are given
success and your establishment is streamlined and the project is running smoothly, and running smoothly, OK
friends, this video I want a little tutorial and shows the burn finishing technique,
but this time it's a bit different because I will show the
burn finishing technique versus the non-burn finishing
technique
. finishing fire is not wanting to show the beauty of wood fibers with
different nuances, which are like delicious, so instead we have to choose wood that has
good fibers, yes, this family has chosen four woods and I have selected the fibers, right,
we are hit, yes and I will try to use burn by using food without going like this
Now for the burnt I usually use source then I brush with a wire brush, without
it I will use biovarnish of Wars then I give it 4gl So
for me both of them we will give a red Tiger color effect with using a power house
and fast Tiger GL is good, we immediately use it well, make sure the wood surface is free from
dirt and dust. Don't forget to wipe it with a clean cloth. But if it's still rough, friends, you
can compress it, okay, and then this second time, we will burn it, so that it becomes heart -be careful
when using it, yes, we will burn it thinly Bismillahirohmanirohim
yo yo Oh yes, after this, let's just leave it alone until the heat is gone, then we
will execute the other one without burning, but we use Papua, this should be it,
sir, this is porous the color is like this so that we are this garden we pour just a little and
the comparison with the water is 2 to 1, yes, that's enough, then we mix
the water in a ratio of 2 to 1, roughly, we mix this hub until it's homogeneous
.
to create
a burning effect using biovarnish we use the one Mr. Warehouse so
the result is like this and this one uses real fire Hi, they have a difference
Hi this uses vaporous and this uses fire Now for the prestige
here we will wait for about 5 minutes After that we will do it with a ball cloth, okay,
after five minutes, for the wood that we gave vaporous earlier, we will wipe it, hi hi , let's
use a new clean cloth.
Let's take off the direction of the wood grain and for the burning effect, it's already visible, yes, it's more visible
and after that Let's wait for it to dry for about 30 minutes to an hour and then
for those who are actually using it, burn it We brush this with a wire brush like this in the direction of the
wood grain, its function is to remove excess coral on the surface of the wood
so that later when we coat it with the next layer it can stick perfectly
to the paint layer until if it is enough then we wipe the remnants of the person and
Hi everyone Hi enough Don't be like this for real burnt
And this is OK for Papua we have to compare the difference to be like
this, without burning, this one with burning here is already different, yes, but after
this we will give the next layer, which is red Our GL will make the color red Tiger
Oh yes this is for the popular layer the ice is dry. The next step is
we sand it using grade 400 sandpaper, we sand it in the direction
of the wood grain. After that we clean the rest of the body with a clean cloth
as well as with the wind but yes,
he has all the morals without a little s It's just that for the real ones, we just need to
clean it again and then we will apply the wood STAIN red GL, we
will form a red Tiger, well after this we will see how the difference between
burning with burning and without Fatah is this red GL color from this biovarnish
our color is important Yes, this red-red fast, we just pour it a little
Hi, I'll just add more, let's key then we mix the water, yes, the
ratio is 2 to 1 later, we will stir it. Let's stir it until it's homogeneous
. and we mix it until it's homogeneous, yes, if
it's homogeneous, we'll fill the rakel over the entire surface of the wood in the direction of the wood grain
Hi for hi hi
Come on, what do you think
Hi everyone, wait on Come on
. vaporous like this
beautiful this one that uses a non-burning shaft and this one with Siddi burn see t
hi hi after this we wait for it to dry for about half an hour to an hour it
is dry yes the click ok next we can see the difference this is equally
beautiful this one with Papua Ros without burning this one with burning Okay this
next step I will try to give clearspot, so one without burning,
one with burning, I will give clear chord dead or like leaf, we will
apply this biovarnish color, clear coat mad mad Yes, aka military leaf, just a little bit
Hi, I have enough of this kind of thing Hi Okay, here are the rest Here, just use the rest, the
comparison with water is two to one, now that's enough, then we mix it until it's
homogeneous. X, after this homogeneity, we apply it to the one without burning and the one with burning
. sandpaper, yes, sandpaper with
great 400 on our threshold. I show you in this video, we are interviewing wooden letters
. Satisfy Hi, this is the application for the hassle, I can do it this time, so
that the dead results are more visible. We will apply it once,
hi hi, maybe uh uh yeah, we just have to wait for it to dry for the clearout layer
, it's about half an hour to one hour raya This is for the strong clear layer, it's already
dry. This is the result I gave trail clear complete. Yes, this is the one without burning, this is
the one that burns for real. Okay, so we have a conclusion. So, the conclusion is that the
finishing technique of burning is one of the techniques that can protect Ayu ah, moreover the appearance of
Munich and of course for the purpose of the finishing technique, besides that this is also for
the Blues, the post is exposing the final fine wood grain, this turns out to be the result, this is the Tiger chain, yes, this is am
Hi without burning, this one uses stadia stock. This is the result later. This is the tiger that uses real fire if we compare it.
What do you guys think?
Is it the same or different, it depends on how it's applied, how do you like
each other, if we use a burnt finishing without a battery
, maybe it's more safe, but we don't have to add paint. But if we use
real fire, there's no need to buy vaporous paint. We also use stores
with gas jams already available. If there is a problem with saving, we will return to our friends.
Hi, if the problem is good or not, we will also go back to the judgment of our friends according to taste,
which one is good. I think that's all I can say and I'm a tutorial Khan and
I hope my video is useful If there are errors or lack of information Please criticize or
suggest in the comments column see you friends Thank you for watching my video don't forget to
subscribe like and share and Turn on the foreigner so you don't miss the video from us
Next, Success is also for all of you, see you soon Assalamualaikum warahmatullah i wabarakatuh