OK the furze flying machine, so got me paramotors we done some Tests for us to prove that they can
lift something next thing I'm going to do is to Chassis, now I have had a thought that both
of my propellers are going to be turning in the same direction which will probably
give some gyroscopic spin because you think of a Chinook they have two propellers and they've run
in opposite directions so I'm gonna have to flip one of the motors up on its back which means this
chassis going straight is probably not gonna do, so I'm gonna make like a little s-shaped one so
it goes under the back motor and up over the top motor so that's what we're going to start with
A little S shaped Frame
right that's kind of got my little s-shaped frame all sorted, lovely jubbly now I just need to sort
something for me to stand on like some foot pegs and then obviously some handlebars so I'm gonna
put me feet on this little bar that wants to sit roughly in the centre of the frame as I want to
be the central mass on all this which is about one point two meters, and if we get some tubes
put them down on the frame off they're basically
at right angles and then another one going up there to brace it excellent
there we go nice s-say chassis all done, its quite light as well at
the moment which is a good thing next job add the motors and then start adding some
controls fuel tank little bits and bobs like that......Yep it's all going well I'd say.
okay so we've got a rear-engine we've got a front-engine now I've left the paramotor frames
on because these things are pretty well made they're CNC machined I can't make such a good
a job so I thought what's the point in trying to recreate something which is already good now
I can't have the rear frame on because it'll be underneath the engine a little bit pointless so
I've got to get that rear engine frame and mount it above here because obviously when
I'm stood here I'm gonna have a propeller whipping around behind me and I don't want
to fall back and get me (chopped up) and then the age-old internet question of will it blend
will be answered so that's the next job Make the frame above the rear one and it kind of gives a
little bit of a symmetrical look even though it's all really upside down and back to front
okay got three things left to do fuel electrics and throttle
What have I made.
okay so have I unlearnt everything I know about mobility I have made a machine on your request
you want something the flys I've built something with no wheels no steering no brakes it's got two
accelerators it doesn't even have a seat but of course the big question is is he gonna work the
next video of course will answer all that, will it get off the ground what if fly will it take
my weight will it be controllable all of these things need answering, they need answering Colin.