Hey, guys.
John here with RealTruck.com.
Today I want to show you how to install the Fia Winter Front and Bug Screen on this 2015
GMC Sierra Denali 2500.
All right, guys.
You can see here we've got everything out of the box, comes with all the stuff you need
to put this on your truck.
It comes with your bug screen for the summer, your winter front for the cold weather.
Also you have two different options available, you either have a stick on snap or a screw
on snap and your instructions sheet.
So let's get this on the truck.
Right, so the first thing we want to do, guys, when we get ready to put our bug screen and
our winter front on the truck, is make sure that we've got our grille shell nice and clean.
Use some soap and water clean it up, and then take the alcohol prep pad that comes with
your winter front and bug screen and just go around the edges of your grille shell here,
because what we want to do is get this all cleaned off, all the residue and stuff off
it, because what we're going to be doing is we're going to be using the stick on snaps
rather than the screw on.
Now, if you were going to screw those on, then you wouldn't even have to worry about
this you would just measure it out and screw them on.
However, in this day and age most people don't want to be putting holes in their grille so
we're going to show you how to do the stick on, really easy.
All right, so we've got that all wiped down clean, so the next thing we're going to do
then is we're going to grab our screen.
And we're going to use the screen rather than the winter front to do this because it's lighter,
it's easier to manage and handle and that will get all of our snaps in the right location
so that we can swap out between the screen and the winter front.
So let's get that on.
All right so we have our stick on snaps applied to our screen here and we're just going to
peel the backing off of the snaps there to reveal the double-sided tape that's on them.
Then were going to take this and attach it.
Now make sure, guys, when you go and put this on you get it the right direction and all,
otherwise it's not going to work very well for you.
So make sure that the word "Fia" is up, and the cut off corner is down.
And then were going to center it onto the grille shell of our truck here.
And once we have it where we want it, then we can go ahead and just press down on that
and that's going to get these snapped in the right locations.
And then we'll just kind of follow it around and pull down on this because we want this
thing to be stretched kind of tight.
Now, ideally if you're putting this on in the winter time, you're probably going to
want have the truck inside somewhere for a while because you want this to be about 65
degrees where you're attaching the tape so that it will stick properly.
And once you have those all attached, then you're ready to go ahead and swap out between
your bug screen for the summer and your winter front for the winter.
So there you go, guys, that's how quick, simple, and easy it is to install the Fia Winter Front
and Bug Screen onto your truck.
So remember until next time, happy motoring.