The 2 gables on the side of the house are miss matched architecturally. They are clad
in different materials and they just look wrong.
So to solve that problem we're going to in fill them with some compressed sheet material
and stain that up to look like cedar planks.
Gotta make sure the panels are really clean like anything before you paint it.
I've given the material a good stir, there's 2 parts to this preparation to give the cedar
look, this is the base coat, they both dry fairly quickly, about an hour. 1 coat of this,
2 coats of the top coat.
The base coat of the cedar look stain flows on really easily, it gives exceptional good
coverage in 1 coat.
Ok, well that's going to take an hour to dry, then we will come back and put the first of
the surface coats on.
We've removed the old compressed sheet, it's actually in remarkably good condition. Now
we're just filling some of the cracks, then we'll paint it and put the new cedar look
sheet in .It’ll be a lot better.
We're using acrylic exterior low sheen, it doesn't require priming or undercoat.
While the barge board is drying, I can apply the first of the 2 top coats to the hardy panel.
The cedar look stain creates its own grain pattern, you don't need any special painting
skills to apply it.
And in just 1 hour I can apply the second top coat of stain.
The finished look is amazingly like cedar.
It's always a good idea to dock the end of each piece using a guide, just to make sure
it's dead square and it butts nicely with the next piece.
Dene has made a template of the gable angle to ensure we get the cuts right.
We don't want to waste any material.
Marking with a score and snap knife will help ensure a clean and accurate cut.
We use a special blade in the circular saw.
It's designed to cut the hardy board with a minimum of dust.
But we still use the vacuum attachment on the circular saw.
Well, it's in position and we're gonna fix it with clouts, which are small flat head
nails and that’ll hold it on this front frame.
The material is fairly easy to handle and working in tandem makes the job quick and easy.
It's a good idea to pre-drill this stuff otherwise it breaks and you don't want that and the
Jarrah is pretty hard too so it gives you a head start.
The panels are fairly solid and the sea breeze isn't helpful.
I wouldn't like to try this from a ladder.
The fixing points are hidden by each successive sheet.
I use quick grab construction adhesive to set the last piece into position.
Well the cedar look really does look like cedar and for our climate, much lower maintenance.
What a transformation.
It was easy to put up wasn't it.
Yeah yeah.
The cedar look really works.
Oh yeah, you can really cedar difference.