How to update the firmware on ATS480 with EADM?
Hello, today we will show you how to update the firmware on ATS480 with EcoStruxure Automation Device Maintenance.
Download EcoStruxure Automation Device Maintenance and your firmware packages on se.com
Connect your computer to your Soft Starter modbus port using TCSMCNAM3M002P or VW3A8127 cable.
Or connect your ethernet option module to your computer with an ethernet cable.
Open EcoStruxure Automation Device Maintenance.
To add your firmware packages, go to 'Settings', then click on 'Package Settings'.
Here is the local repository where you should add your software packages. If needed you can change the path.
To add your device, click here.
Select your communication mode and adjust the communication settings if needed.
An unindentified device appears. Select this device.
Select your product or option module firmware package.
Click on 'Device login'. If credentials are required, enter your device User Name and password, then click on 'Connect'.
Your device is now identified.
Click on 'Update Firmware'.
Click on 'Confirm' to start updating.
A notification appears. Select the warning message and click on 'Confirm'.
The transfer starts.
The transfer can be done while the motor is running or stopped
whereas the update can only be applied if the motor is stopped.
When the transfer is done, a notification appears.
If your application is stopped, select the warning message and click on 'Confirm'.
The applying phase starts.
During this phase, your ATS480 restarts.
Once the applying phase is done, a third notification appears.
select the warning message and click on 'Confirm' in order to finalize the firmware update.
If your product is running, transfer your firmware package following the same procedure.
Do not apply the firmware update, click on the warning message and select 'Reject'.
Once your application is stopped, on your Display terminal go to [Device Management] DMT menu
then [Firmware update] FWUP
and select [Check for update] NFW or [Available Packages] APK.
Select the transferred package
and apply the new firmware by pressing the 'OK' button.
Thank you for watching. For more information, please visit our website.