The NAMUR proximity sensor has been in use for many years
but like any electronic device,
there are many different symbols in use.
In a nutshell, NAMUR proximity sensors were developed
to ensure safety in hazardous locations.
NAMUR proximity sensors are used in classified hazardous location areas
that have explosive gas, dust, or fibers present.
In this video, we're going to introduce you to a sensor called
a NAMUR proximity sensor.
We’re going to discuss how this NAMUR sensor differs from other proximity sensors,
and we’ll show you where and why these sensors are used in the field.
Alright…..let’s go….
A NAMUR proximity sensor can be normally open or normally closed.
NAMUR proximity sensors can be capacitive,
inductive, magnetic, or can be photoelectric sensors.
One could be easily fooled by assuming that a NAMUR sensor
is a typical proximity sensor
because they look very much alike.
But physical shape and appearance are the only characteristics they have in common.
Let’s begin by reviewing the electrical characteristics of a typical proximity sensor.
As illustrated in our animation,
the proximity sensor acts just like a simple switch.
When the target is away from the sensor, the switch is open.
When the target is close to the sensor, the switch is closed.
In most industrial applications today,
a proximity sensor is not connected to an actual load resistance
but is connected to an input on a Digital Input Module on a PLC or DCS.
Here’s an example of an active 3-wire proximity sensor in operation.
The PLC input will have +24 volts or 0 volts applied
depending upon the operational condition of the 3-wire proximity sensor internal switch.
OK….let’s move on to the NAMUR proximity sensor.
The term “NAMUR” is an acronym for a very long German description.
If you are interested in the exact description and its English translation,
you can find it easily on the internet.
Here’s the schematic symbol for a NAMUR proximity sensor.
The NAMUR proximity sensor has been in use for many years
but like any electronic device,
there are many different symbols in use.
In a nutshell, NAMUR proximity sensors were developed
to ensure safety in hazardous locations.
NAMUR proximity sensors are used in classified hazardous location areas
that have explosive gas, dust, or fibers present.
NAMUR proximity sensors are considered “Intrinsically Safe”.
So, how does a NAMUR proximity sensor ensure safety?
The NAMUR proximity sensor operates much like a typical proximity sensor
but does not have an open or closed output condition.
Instead, a NAMUR proximity sensor will produce
two different and distinct current output levels
corresponding to the target position.
NAMUR proximity sensors limit current
so that the current is not capable of causing ignition in hazardous atmospheres.
Typical proximity sensors that continually make and break an output circuit
could create sparks that could cause an explosion.
Let’s have a closer look…
A NAMUR proximity sensor has a switching circuit
similar to a typical proximity sensor,
but instead of making and breaking an external circuit,
the switching circuit is used to change the output current flow
by altering an internal resistor network.
Using this technology,
there are 2 output current values depending upon the position of the target.
Let's take a look at a real-world example…
There are 4 NAMUR proximity sensors used to measure the shaft speed
on four separate chemical pumps.
The pumps are located in a hazardous area,
therefore typical proximity/speed sensors are not suitable.
The current output of each NAMUR proximity sensor
is detected by an Intrinsically Safe Barrier Converter
that provides a square wave pulse train to a Siemens PLC counter module.
If you want to learn more,
you might want to review our video called
“How to Wire Discrete DC Sensors to PLC - Part 2”.
You can find the link to this video in the description.
OK…let’s review…
A typical proximity sensor acts just like a simple switch.
When the target is away from the sensor, the switch is open.
When the target is close to the sensor, the switch is closed.
NAMUR proximity sensors look just like typical proximity sensors
The term “NAMUR” is an acronym for a very long German description.
NAMUR proximity sensors were developed to ensure safety in hazardous areas
that have explosive gas, dust, or fibers present.
NAMUR proximity sensors are considered “Intrinsically Safe”
A NAMUR proximity sensor
will produce 2 different and distinct current output levels
corresponding to the target position.
Want to learn PLC programming
in an easy to understand format
and take your career to the next level?
Head on over to realpars.com