[Music]
How to Apply Arm-R-Seal over an Existing Finish
I'm going to show you three ways to apply Arm-R-Seal.
First one is with a rag.
1) Apply with rag
All applications shown are the third and final coat
Wipe on with liberally soaked rag
Wipe off excess with light, even strokes
There you go.
2) Apply with a terry cloth covered sponge
The second way is to apply it with this terry cloth covered-sponge.
I've taken the Arm-R-Seal and put it into a flip-top squeeze bottle to make it a lot easier to apply.
Nice thing about this applicator is it holds a lot of material,
so you can cover a large area fairly quickly.
Then when most of the product leaves the sponge,
the cloth still stays wet with finish
so you can wipe the excess off very easily.
Wipe off excess with light, even strokes
3) Apply with a wrapped paint pad
Alright, the third way to apply it is using a paint pad applicator.
I like to wrap this in a cloth that way,
these little hairs don't get out into the finish
Wipe off excess with light, even strokes
and that's it!
Apply liberally
Wipe back lightly
Don't over work the finish!
It's that easy.
General Finishes is dedicated to testing
evaluating and advancing our finishes
with the highest quality ingredients and
leading edge technology
Learn more about these wood stains and other GF products at
GeneralFinishes.com
General Finishes.
We make tomorrow's finishes today.
[Music]