Other folks, we are back in San Bruno doing this relatively simple project air-conditioning unit.
I think we've done about 50 of them where we put it all back together. Jason will break it all
out here while I do something else significant and I'll change breaking it broke it out. I'm
going to come back. We're going to laugh it up, and I'll show you how we do these two coats jay
is a master at mix it just right so I can slam it out real fast and float it while you watch
doing the paper on something like this here's their our existing paper and we got this
electrical little box here I didn't break out this but I pried it over with a hammer
fortunate that we got great paper on this so we're slipway down in here now we take our new
paper and we slide it under the existing paper we lift it up sometimes with a hammer and just
slide it up under right now I've got about four three four inches under there that's good that
way when the water goes through this it lands on top of the existing paper then lands on our new
paper and that's how waterproof it ok guys what I'm going to do here is another layer
of wire on it because we're about an inch in our inch and a half generally stuck was about
seven eighths of an inch and I want it to hang and not true so I'm gonna put another one and
then I'll show you how easy it is with two mm wire with inch in a half we're not going
to have any issues I'll show it to you when we get ready to do it okay guys I got some
really hot bug here look at this that is hot mud takes a lot of practice to mix it like
that but when you have it like that what's up I could slam this off without it falling all over
real hot bird this is a five-minute mode
don't make a five-minute but I'm just I'm put accelerators in it.
I did it to give it what I know to be five minutes
Jason Dixon the year, so he knows how to fix it just right, so maybe you guys are trying to do it.
But, you see, like a lot of people do, man, I walk - dude, I jumped half of it or came off because it
was too soupy. It takes time to learn how to even listen, bu,,d, and I'm not talking about a month.
technically I what I usually do until on a video well let it go mess around and do some
other stuff and come back to this I don't have no other stuff Fitch this is it we are all the
way here and drop down just to do this little pouch here now go this is that inch and a half
thick it's tough to do this with say seven eight - the names wrong inch and a half but anyway what
we do is that and I'm using my big fella call it snowplow this is your average child's 12 by
5 I like the big one here just big tractor um yeah within five minutes this will get hard and
just for the sake of showing off again no Jay hi max just finish here I'm pulling it upward
get all the water off because I just put it on I don't want a lot of water generally I will
this trial or spun float in the water but if I put it in the water I'm going to wet what I've
already got make it tough feather it into the joints got us into it now they're into
it every which way let me downward now it starts to drag this too much cement on there now I come
down perfect come up this again is with a lot a bit of mud God and a half but you have to hit
it immediately like this unless you know what you're doing to not mix one thing I know how
to spread and do all this but unless you know how to mix it right - I couldn't do this if the
mix wasn't proper meaning a lot of luminite technically sit there that's it we're going
to get cleaned up and get out of here we are getting all the way into down the tail there
it is what's hot on it Jess you guys will ever need to do how bad you'll have a hard enough
time doing with regular mud anyway my name is Kirk, Jason who mix for me and broke everything
out and holding the camera thank you folks for watching we'll see you guys at the next one.