Hello everybody!
Watch this video to find out how to recover data from VMware ESXi Server hypervisor and
VMFS file system.
We will explore how to create a Windows virtual machine on ESXi Server, how to manage snapshots,
how to recover virtual machine files from the disk of a non-operable server, how to
restore operability of a virtual machine, and how to recover information from .vmdk
files.
VMWare ESXi is a hypervisor that can be installed onto a physical server and lets you run several
operating systems on a single host computer.
These operating systems work separately from each other but they may interact with other
computers over the network.
Visit our channel for a detailed video tutorial on how to install an ESXi hypervisor.
Check the link below.
How to create a virtual machine For starters, let’s see how you can create
a virtual machine.
On the client machine, open a browser and type the server’s IP address.
Enter the administrator’s login and password.
Open the Navigator and go to the tab “Virtual Machines.”
In the window on the right, click “Create/Register VM.”
In the window that opens, choose “Create a new virtual machine.”
Then give the name of the virtual machine, and specify its operating system family and
version.
After that, choose the storage for the virtual machine files.
While configuring the parameters, select the number of processors and the amount of RAM
to be allocated for the virtual machine.
Also, remember to allocate some disk space.
Click “Add other device” and select CD / DVD Drive.
Select the disk type for it - Datastore ISO File, and give the path to the ISO file of
the operating system.
If there is no such image on your server, then at the top of the window that opens,
click “Upload” and give the path to the previously downloaded ISO image of the operating
system that is stored on the client machine, then click “Open” and wait for the upload
to be completed.
After that, highlight it and click “Select” - “Next” - and then “Finish.”
Now the only thing left to do is to start it and install the operating system.
Select the virtual machine and click “Power on.”
The actual process of installing an operating system to a virtual machine is the same as
if you were installing it to your computer, so just follow the wizard directions.
When the installation process is over, the virtual machine will be ready to use.
How to take a snapshot in vSphere web client The vSphere hypervisor lets you take snapshots
of your virtual machine.
A snapshot captures the state and data of a virtual machine at the specific time when
the snapshot was taken.
Snapshots can help you restore the operating system when files are deleted accidentally,
or when you want to return to previous settings.
To take a snapshot, select a virtual machine that is powered off, select “Snapshot”
- “Take snapshot.”
Give it a name and then click “Take snapshot.”
Now that you have the snapshot, you can revert the operating system to that snapshot at any
time.
How to restore a snapshot in vSphere web client When you go back to a snapshot, all settings,
changes, or disks added after the snapshot was taken will be restored to their previous
state.
If you need to do it, right-click on the virtual machine - “Snapshot” – “Restore snapshot.”
You will see a warning saying the current state of the virtual machine will be lost
unless you save it in a snapshot.
Click “Restore” to confirm your decision.
How to delete a snapshot In the snapshot manager, you can always remove
any snapshot you have taken before.
Select the snapshot you want to delete, click “Delete snapshot” and then click “Remove”
to confirm.
In the manager, you can choose to remove a single snapshot, or all of them by clicking
“Delete all snapshots.”
How to recover virtual machine files from vSphere hypervisor
If you have accidentally removed a wrong snapshot or virtual machine files, if your server broke
down or if you lost access to your virtual machine - don’t worry, but use the specialized
data recovery tool - Hetman Partition Recovery.
As we know, files of virtual machines managed by ESXi hypervisor are stored on the disk,
in volumes having the VMFS file system.
The biggest problem is that when an ESXi host breaks down, there is no way to retrieve the
information stored on its disks - unless you use some specialized software.
The matter is that classic Windows and Linux operating systems cannot recognize volumes
or partitions with the VMFS file system.
However, Hetman Partition Recovery offers complete support for VMFS file system including
its latest version, and it supports SEsparse snapshot files as well.
SEsparse is a new virtual disk format similar to VMFSsparse, but with some improvements
and new features.
One of the differences between SEsparse and VMFSsparse is that SEsparse uses 4 KB blocks
in contrast with 512-byte blocks in VMFSsparse.
In the end, it supports files up to 2 TB thanks to having a 64-bit structure.
Most often, virtual machines are stored on a RAID system, and even with the well-known
reliability of disk arrays, we cannot exclude the chances of their breaking down.
To rebuild a damaged RAID system inside the broken server and recover the virtual machine
files, use Hetman RAID Recovery.
Take the disks out of the server and connect them to a Windows computer.
Download, install and run the program.
Hetman RAID Recovery will automatically rebuild the damaged RAID system with the available
disks.
All you need to do is to scan it and restore the files you need.
In my case, the virtual machines are stored on one disk without RAID.
Right-click on the disk and choose the scan type to start searching for files.
“Fast scan” will check it in a few seconds and display the files.
If the program failed to find the lost files with “Fast scan,” go for “Full analysis,”
specify the file system and start the search.
In more complicated situations, you can find files by their signatures; to have the program
do it, check the box for content-aware analysis.
In my case, “Fast scan” will be enough.
After that, go to the directory where virtual hard disk files were stored.
By default, they are located here: Volume name \ virtual machine name
Look for the files with the name of your virtual machine and the extension .vmdk; snapshot
files will have the extension sesparse.vmdk, and configuration files can be distinguished
by the extension .vmx.
To avoid any issues with importing files in the future, it is better to completely recover
the virtual machine folder.
Select the files you want to recover, click “Recovery,” select where you want to save
them, and click “Recovery” again.
When the entire process is over, you will find the recovered files in the folder you
have chosen.
How to import files, and restore operability of the virtual machine
Now, if you need to restore operability of the virtual machine, the recovered files should
be uploaded to the server and registered with the vSphere web client.
Method one: To do that, enable SSH access to the server
and connect to it by SFTP.
Copy the virtual machine files to the server - and into this specific folder:
/vmfs/volumes/628193bd-b8c5e55a-48d0-3cd92b5c9306 Then open the web client, click “Host”
- “Create or register a virtual machine,” open the last option – “Register an existing
virtual machine.”
After that, specify the folder containing the recovered virtual machine files by choosing
“Select one or more virtual machines, a datastore or a directory.”
Select – Next – Finish.
The program will upload the files and the virtual machine will appear on this list.
Now you can start it and access the files you need.
Method two: If you tried the first method, and the virtual
machine starts with an error, then try another method instead.
Create a new virtual machine, and while configuring its hardware, remove the hard disk.
After that, click “Add hard disk,” choose the second option “Existing hard disk,”
give the path to the folder containing virtual machine files - .vmdk – Select, Next and
Finish.
Now try to boot the virtual machine and see if there are any errors.
Sometimes this method helps to fix the boot problem.
How to recover data from a virtual disk (VHD) file
If you try to boot a virtual machine and encounter an error, if the files are damaged, or if
you accidentally removed some information while working with the virtual machine - don’t
worry: with Hetman Partition Recovery, all the lost data will be back.
Our program supports data recovery from dynamic and fixed-size virtual hard disks, restore
points and operating system snapshots.
Hetman Partition Recovery lets you restore both virtual machine files – VMDK or and
any data removed from VMDK disks.
Also, it can recover data files from formatted virtual hard disks, and it doesn’t matter
if the disk used to be a dynamic or a fixed-size one.
After you have recovered .VMDK files or copied them to the computer, you need to upload them
to our program.
In the main window, open the Tools tab and choose “Mount disk.”
There are two ways to mount it: choose a RAW disk image if necessary, or choose Virtual
Machines.
After choosing the second option, you can see the list of files and tools that our program
supports.
Check the required image type, give the path to the folder containing virtual hard disk
files, and click “Open.”
The program will upload and display all virtual disk and snapshot files which exist in such
folder.
As you can see, in addition to the main disks there are also restore point files, and snapshots
of the virtual machine.
The virtual disk file which is currently in use by the virtual machine will be marked
as “Active.”
Other files are snapshots and restore points, and using the date of their creation, you
can decide which one you need to recover.
Check the box next to the disk you are interested in, and click Next.
It will appear in the Drive Manager immediately.
Right-click on the disk and choose “Open.”
Select the scan type, and choose “Fast scan” for starters.
If the “Fast scan” can’t find the required files, then go for “Full analysis.”
Right-click on the disk - “Analyze again” - “Full analysis” - and specify the file
system for this disk.
Then go to the folder where the files used to be stored, and look for the ones you need
to restore, select them and click “Recovery,” select the disk and folder, and click “Recovery”
again.
That is all for now!
Hopefully, this video was useful.
Remember to click the Like button and subscribe to our channel.
Leave comments to ask questions.
Thank you for watching.
Good luck.