is here it's here it's here it's heavy I
don't always do unboxing videos but when I do it's disk centers stay thirsty my
friends alright let's open this up well it's not
exactly like the picture the picture showed a white one this is clearly not
white not a big deal but if they show you white went in a picture you think
they'd send you a white one and
anyway I gotta put the tables on and get them Square and the styrofoam had a big
chunk missing out of it that had been beat to hell so let me sit down and put
my glasses on and give this a real good look because the side cover here this
plastic will make sure nothing's busted alright we're gonna check for square to
the table against the sanding the face of the sanding disc
and it you go now I will check the fence
yeah all right the table set up I'm going to set that table over which is
right here and I want to show you my church nation
you into thinking chair buddy let me know if you need anything
philia great fan you with a poem from
well I can already tell that this is probably not gonna be square
yeah see that big gap up there we'll see all right well I'm gonna mount it if I
have to I can bend this and get it's worse we'll see I'll get it I'll get it
mounted all right it's uh square this way but look this way
not even close so
this bracket
it's not at a ninety-degree I can tell by looking at it it's off so what I've
got to do is take the bracket off two spreads put in my vise and then Bend
this this this away I'm exaggerating but I need to go from here and sit here with
the practice and there's a piece where let me get that done and then we can
crank it up and try something on
the tracking is off on this bill
who are working that include we'll work with that for a little while
already now I got a drop a couple of ideas in my head at home want to mount
this saw I saw that sander it's gonna go right in this area here this this won't
be parked here I may build a bit of a bench to come out here and set it on
because I may have another tool to go down there and you can never have too
many benches I'm thinking poor feet will be more than enough of this I'll put it
on the end yeah anyway I'll be thinking about it I probably have enough scrap
there's the piece of plywood that I took off the wall where I had my tools so
that's more than enough to build something I've got a couple of two
Mateusz a leftover piece uh two by six there's one befores and I may have
enough to build something I'm gonna be thinking about what I need right now
there's all the stuff I took off the wall I got to clean all this mess up and
leave my bench off and tidy up in here then then I'll be thinking about what
I'm gonna do for this sambar I'll tell ya I like the sander so far it's a
little bit early but I'm not very impressed with the fact that you have to
do so much squaring yourself and the way this was
this table was tilted that way you know by a good 10 or 12 degrees I'm gonna
sand anything square with a tip the wood table tilted you know and this table it
has this and on the other side you see if I can show you right here that's the
same thing and when you tighten these up the table tell us so you got to be very
very careful and tighten each one up a little at a time to make sure this this
table stays square with a disc and then when you want to replace this this you
got to go through that mess all over again same with this this was a no not a
problem but to have to square this table every
time you want to take this belt off you know
you kind of expect this stuff from Harbor Freight but this is jet it's
supposed to be up there you know upper you know up upper tier stuff not
american-made it's actually don't even know where it's made uh I have to look
on that extraction people says bro Westeros is probably not maybe I'm
sure on here it says country of origin somewhere and I'm thinking his China or
Taiwan or something like that what and then the fact that in the
picture shows you a typical white jet tool and they sent it to goodness my
wife I mean not a big deal but anyway it's a $400 tool was on sale for
400 bucks and I think this will get me started and knife-making
and I have a line on a forge up in Nashville Arkansas I'm in kind of in
negotiations right now it's an old blacksmith's forge and they're asking
$400 but it's been on Craigslist for over a month and really I can't spare
the cash right now but if I could talk them down to $200 I
would find the money somewhere and go get it it's about 120 miles from we're
out of there all righty well there's uh there's the update on my latest tool
edition and this is just one step closer to making some knives thanks for
watching y'all now you cannot escape by like 13