Hello everyone, I am LoreChirik
And today, we're gonna make-
[Slenderman] Boo. I'm scary!
[LoreChirik] No you're not.
[Slenderman] I am! I am Slenderman
[LoreChirik] Dude, stop what are you doing here?
Where is Granny?
[Slenderman] Uh, On holiday.
[LoreChirik] What?
[Slenderman] Granny, Grandpa, and Slendrena are in the Bahamas, and I am here to replace them!
[LoreChirik] Ok. Sit there, don't move, and don't talk. Ok?
Uh . . . Ok, so in the few previous videos a lot of you requested to make
Slenderman! So today on the plate, or rather baking tray, we've got Slenderman!
I planned to make it a week ago,
but as you might know or might not,
I'm running two channels at the same time this channel and also my plush puppet channel
LushyPlushie and these take a lot of time
So that's why this video is released today. And if you are not familiar with my second channel,
make sure to give it a try after this video. The links are in description,
cards, and end screens. I know that some of you watch both channels, some of you only this channel.
Also some of you watch only LushyPlushie, so I'm fine with that
But I'm just saying that if you like this channel you might also like my second channel
Alright without further ado. Let's focus on our creation
So as you see I started like in almost every creation with the base to this base
I'm sticking aluminum wire and I am waiting 10 minutes until it dries.
When it's drying, I'm making color for the base.
Our Slenderman will stand on something that looks like a rock so I mix grey clay with black clay and
the rest,
[Inaudible Screeching]
Very dark clay. At this point
I decided that I'm gonna bake this figure only once
like I did with the new Monster Bendy figure. If you watched that video, you know what I mean.
So I'm gonna glue again the point where the wire meets the wood paste. But this time,
I'm using another type of glue to make it an even better
connection because as you will see later those two tiny aluminum wires will carry around
300 grams and that's a lot. So in the meantime when the second glue is drying, I'm
opening the first bag of black clay and I am cutting it into pieces
Because I will be running it through my clay machine to make it softer and to make shape for the legs.
So as you see, I roll this piece of clay and I cut it in half
Those two pieces will be our
Slenderman legs the rest of clay I will save for later and now I am placing the base on the vise
This vise is so helpful in a project like this because it holds the figure in one place,
so it's a really useful tool. After that
I'm placing the grey clay for the base on the aluminum wire on I'm cutting it to the size of our base
And I am placing another one on top of that to cover dried glue
It will help us to create the shoes. And of course liquid glue
I almost forgot about this one. Now we will be placing legs on the aluminum wire
So I make a cut in each one for the wire
but first we gonna do the shoes. And
While making it I'm gonna answer some questions from the comment section.
[Clementine Fourt] "Is the clay hot after you put it in the oven???"
Yes, it is. Very hot. You actually might get burned if you touch it with your bare hands
I always use the kitchen oven gloves to take it out and I'm always
taking out a whole baking tray and after that I wait like from half hour to one hour
to cool down
because after that time the figure is solid and hard and I can remove it from the baking tray without fear of
Destroying it. But back to our Slenderman
We finished the feet and now I'm smoking the left leg and making another one
His legs will be very long
And as you see I'm starting from the bottom. Now, I do the hip area and while I'm making this
I'm gonna answer some questions
and if you have any questions
Make sure to end them with the question marks so I could easily find them in YouTube studio
So we've got a question.
[Dewayne Swords] "What kind of oven do you use?"
Well, it's just a normal oven.
I'm sure every one of you have an oven in the kitchen so you don't need any specific oven. But back to our sculpture
I just finished the hips and now I'm tangling the aluminum wires and opening another bag of clay.
This one will be for the torso. So I just shape it to match the size of Slenderman's hips
And by the way, this is the third character that I made in a suit
Recently, we made a lot of them first was Reaper from Fortnite, then Slappy, and now we're creating Slenderman
I wonder what would be the next figure in a suit that we'll create
So as you just saw I place it this block of clay on the aluminum wire
And now I'm connecting those two parts together and our figure is starting to be heavy
So it might dangle a little bit. And now, I'm cutting the top of the torso
Because I need to make arms so I tangle a little bit of aluminum wire and I cut it in there where the
arms should end at. So very near the knees. And now, I'm gluing it so it will not be loose.
[Slenderman] But can you do this?
[LoreChirik] No I can't. Go on your sofa!
[Slenderman] But can you do this? Hahaha I can tickle myself!
[LoreChirik] Something is wrong with this Slenderman.
But anyway, let's get back to our figure. When I went for the water, our glue
just dried so now I can close the torso
And now as you see all my FIMO Professional clay have ended (meaning he ran out)
So I use FIMO Soft and we're gonna make arms. So again,
I cut it in half like I did with the legs. And while I do this, I'm gonna read some comments
someone wrote
[Pisonka CZ] "Do Dame tu Cosita"
Please no
Ok, another question
[Connor Stanley] "How do you know how much clay you need"
Well, I don't know. I just always buy more than I need for a project
Because I never know how big it will come out. And in this case,
My black clay almost ended. (meaning he almost ran out.) I used like two and a half pack of clay
so that's a lot and this figure is probably the tallest of anything I ever done so
We, in a moment, will make a record on this channel. But back to our figure.
I just make a sheet of clay and I am placing it on the torso and this will be the end of the suit.
so as you see I'm
cutting it on the edge and then I connected it with the torso and we gonna make the tie on the suit.
So again, I use the sheet to do that and while it's finished
I'm gonna do the folds on the suits with my clay shaper, too
So with that our Slenderman will look more realistic and while I do this, we've got a few more questions
[panda girl] were you in the netherlands on 14-7-2018?because if you were i think i saw you in the mac.
No. It wasn't me but I do sometimes go the mac. Not very often but sometimes. Ok
I just finish
the folds, and now I'm gonna place the arms where their place is, and I am smoothing the arms and
smoothing all of the figure to get rid of fingerprints. After it's done
I will be making hands so I cut the clay where the hand should be on again some
Folds on the arms. Why not? And again a little bit of smoothing
Dude stop that's creepy!
[Slenderman] Hehehehe. You aren't ticklish?
[LoreChirik] No I'm not.
Who are you anyway in this family? Husband of Slendrina?
[Slenderman] No! Slendrina is my daughter!
[LoreChirik] And . . . Granny?
[Slenderman] My wife!
[LoreChirik] And . . . Grandpa?
[Slenderman] Um, My friend!
[LoreChirik] So why are you not with your family in the Bahamas?
[Slenderman] Hmmm. Good point!
[LoreChirik] Hmm
That's explained everything
I'm pretty sure that Granny is cheating on Slenderman with Grandpa
If you have any other theories on that, let me know in the comments
maybe we can use some of that to get rid of them from my house and
What do you want?
[Slenderman] Ask them if they're ticklish
[LoreChirik] No! Go away! I'm doing the voice over!
[Slenderman] Pleeeeeease?
[LoreChirik] Ok.
Slenderman wants to know if you're ticklish. So . . . let us know in the
. . . comments
So let's get back to our figure. It's almost done.
Now, I just unpack the white clay and I will make the head, and the hands with fingers
so as you see I'm placing the fingers separately in the hand, and I'm
Connecting it with the hand using my whole scalping tool and when it's done
I will be making some of the white t-shirt of Slenderman
And I'm cutting the wire. Now I'm making the neck and placing the head
I make some makeshift nose and chin because in a moment, we'll be covering it with bandages
So as you see I cut a pretty long belt of polymer clay
I made these in level 8 on my pasta machine and I'm covering with that head of our
Slenderman and all those elements that I made previously
Will be hiding behind the bandages but the shape of it will stay
so now I'm making the tie and smoothing the surface of our hands and of
Our suit with my brush and we are very close to the end
now you will see that I placed the support on the baking tray and it will secure the
Slenderman because he's very tall and very heavy around
300 grams so it might fall in the oven
so that's why I use support. Now the last tip, the base and
Slenderman is going to the oven and when I take it from the oven
I just need to remove support and take it off from the baking tray and it's done
Let me know what you want me to create next
[Slenderman] Woo! It's ready! Yay! It's awesome!
[LoreChirik] E-easy or you will break it!
[Slenderman] Can I do the ending?! Pleeeeeeeeeease?!
[LoreChirik] Yeah. Go on!
[Slenderman] Leave a like or I will come to your house and tickle you to death!
[LoreChirik] or maybe not.
[Slenderman] Subscribe and smack the bell very hard to see more creepypasta characters!
Click on the end screen to see how my beautiful family have been made. Granny my wife, Slendrina
my daughter, Grandpa my very best friend. Also check out LoreChirik's second channel, LushyPlushie. This is Abdul