Hi everyone, Welcome back to geardo,
Today we will show you how to replace the battery on the Samsung Galaxy s20 Plus mobile phone.
To start, we need to have the right tools to proceed with the repair,
which You can find in the description.
First, Take out the Sim tray and then the back cover removal.
To remove the back cover, it needs to heat gently
around the back cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad. Place the back cover side on
the heating pad and Select the mobile phone HEATING option and leave it till
it completes. Alternatively, you can use a heat gun or hairdryer.
Once the heating has completed,
Use a suction cup to create an opening between the frame and rear cover. Next,
insert a plastic card pry tool or something similar to cut the adhesive around the back cover.
Next, take out the back cover, and disconnect the connector and
pry it up to take out the wireless pad. ANd also disconnect the battery plug.
Next, disconnect three connector plugs from the
logic board and take out the not working battery from the body.
First, apply little heat to soften the glue on the battery. For this, we are using a heat gun.
Once you feel the heating is enough, use a card pry tool to cut the adhesive
under the battery. And Once you have some space, use a pry tool to lift the battery.
Next, Place the New battery in the body. If needed, add adhesive to the battery.
Next, secure three connector plugs into the logic board. Also, make sure to secure the battery plug.
Next, add the sim tray and place the wireless pad by connecting the plug.
Next, Before installing the main back cover, make sure it has enough glue on it.
If not, use B7000 glue or a new double-sided back cover adhesive.
Finally, we are using screen binding clips to tighten the back cover to the body.
If not, you can use rubber bands and leave them for some time.
I hope you have enjoyed the battery replacement guide.
Let us know if you have any questions; please share and comment on our videos.
DO not forget to hit the subscribe button.