Welcome to baling in the fastlane.
The Kubota FastBale is the quicker, smarter way to bale.
Across a variety of work modes and crop types, no compromise to quality.
This heavy duty round baler, uses 4 by 4 high quality bales
And requires a minimum of 150 horsepower and PTO.
It comes with an innovative design and a built in wrapper for efficient non-stop baling.
Forget the stop start hassell of old school baling.
The FastBale gives you nonstop baling capability
now you can enjoy great productivity, time and time again.
Field after field and non-stop.
The process kicks off. With the fastbales extra wide, high capacity
800 mm intake rotor,
housing a selectable 25 knife chopping system.
Ranging from 6, 12, 13, or 25 knives
for optimal cut quality
and tremendous intake performance
crops are then led into the fastbales dual changing chambers
to be compressed.
With baling and wrapping in non-stop mode. The crop is first fed
and compressed in the prechamber.
Once the selected density level is achieved, the bale is quickly
transferred to the main chamber to complete the baling process.
This double compression through chambers results in denser bales.
When the bale in the main chamber reaches the selected density level
The net wrap is applied to complete the baling process.
Simultaneously the pre chamber begins forming a new bale.
The tailgate opens and the completed bale rolls directly on to the wrapper.
The built in wrapper is a marval in itself,
the FastBale integrates twin wrapping arms
To quickly wrap the bale, conserve nutrients, and produce high quality bales.
The FastBale offers two ways to gently place your bales
dropping the bale on its base
Or by selecting the tipping option which places it on it’s side,
where more plastic was applied to the wrapper to reduce the risk of puncture.
Plus the whole process is automatic and hassle free.
It can be easily operated from the tractors ISO-BUS monitor.
The operator has the ability to choose when and where the bale is dropped.
Baling and wrapping in non-stop mode
allows maximum output and also reduces wear and tear on your tractor.
In the event the wrapper is not required
Activate the non-stop mode with the wrapper disabled
to ensure bales are discharged directly from the main bale chamber with no delay
Making the FastBale capable of baling various crops
In non-stop mode when wrapping is not required,
the FastBale offers the ability to hold one bale in the wrapper
and discharge them in pairs. To allow for more efficient collection
Kubota’s FastBale allows you to soly run the main chamber with the non-stop mode disabled
To replace the netwrap, simply lift and lower the pickup
to the pressurized system and then turn off the tractor.
Open the side panels of the FastBale and load the net
onto the net wrap lifter, while paying attention to tail position
You can then fold the net wrap into the lifter
Once you activate the net wrap hydraulic system and leaver,
you then drop the ladder and use it to climb and remove the lock collar
This allows you to slide the roll into the net wrap dispenser.
Put the lock on collar on the shaft and root the net wrap
Once this has been completed, you climb down the ladder, fold it up, and close the side panels
The FastBale also conveniently stores a spare roll of net
Additionally, Kubota’s FastBale has been built with maximum
reliability in mind and incorporates many features
to increase long term durability
Long life for chamber roller, intake roller bearings is insured
by an automatic greasing system
While chain drives are provided by with an automatic lubrication system
Installing the bale film is a simple and quick process
Firstly, you need to press the button to start the film change process,
press the button to position wrapping arm to position load the first roll of film
Load roll respecting tail position and close lock
Root film through the film through the film rollers and extend film tail,
you then release the film rollers
And press the button until the second holder is in position
Repeat the process and press the button until the upper reaches the home position and lowers the wrapper.
Put the film tails in kife and you are all set
The FastBale also conveniently stores 8 additional film roles
3 on the left, 5 on the right
With this unique combination of abilities, the Kubota’s FastBale
offers a flexible solution to all your baling and wrapping needs
All while improving operator comfort
and taking your productivity to the fast lane
The Kubota FastBale, visit a Kubota dealer to see it for yourself
Kubota.
For Earth, For Life