Hello guys, welcome back to the Tenorshare Channel.
If you see the Activation Lock screen on your iPhone when you set it up from factory settings,
it means Find My is enabled.
You can unlock it easily with the Apple ID and password.
Or, if you use Two-Factor Authentication, you can unlock it using the device passcode.
Just like that.
What if we forgot all these information?
Is it still possible to regain access to our device?
Thank God, the answer is Yes.
In this video, we will be go over 2 methods that have been proven to work.
The first one is free, and the second has a higher success rate.
So, let’s dive in!
The Checkra1n is free, but we will need a Mac for this method.
If you use windows,
skip ahead to the last part where we show you how to use 4MeKey.
So we go to the website.
Click get the beta now, and then download for macOS.
Once downloaded, we install and move it to the application folder.
Then go ahead and open it up.
If you see a pop-up like this.
Go to security and privacy option in system preference,
and open it anyway.
Then we should see the checkrein jailbreak wizard.
Go head and plug your phone in.
It says iPhone X is not supported at this point.
Let’s head to option, check off allow untested iOS and skip A11 BPR check.
Then quit back.
Now it says the device is only partially supported.
That’s fine, let’s continue.
Here we click next to enter recovery mode.
Then we’ll get a DFU guide.
Click start, then quickly complete each steps before the countdown is over.
For iPhone X or later, is press and hold the side and volume down for 4 seconds.
Then release the side button but keep holding the volume down for another 10 seconds.
In DFU mode, the jailbreak code will be running on the device.
Well done, now let’s start bypassing the iCloud lock.
First, we will download the command line,
you can find the link in the description down below.
Then we open it and copy the command.
Now launch the Terminal App,
and then paste that command line.
Once done, press enter.
And then we wait for it to initialize.
Now what we gonna do is enter the password.
Then hit enter again.
Now it reminds us that the device has to be jailbroken, we’ve done that already.
So we press enter again to confirm.
And boom!
It’s done.
Let’s go ahead and check it out.
This time we should be able to see the data & privacy screen.
As we can see, it didn’t seem to work.
In my experience, it could fail a few times before coming to a success.
If you are looking for alternatives, keep watching.
In the second part here, I’d like to show you how to do it with 4MeKey,
which works on both windows and Mac.
We will start with the Mac version.
So once we launch it and connect the device.
Go to the remove iCloud Activation Lock section.
Click start and agree to the terms and conditions.
4MeKey will start downloading checkrein for us.
Once done, click start jailbreak.
Here we got the checkrein window again.
Everything goes exactly the same as before.
So once we complete the jailbreak, go ahead and close checkrein.
And then we are back to 4MeKey.
Let’s hit next.
Click start remove to proceed.
Well done, let’s check it out.
As you can see, this time we got the data and privacy option,
which means the activation lock is bypassed.
Let’s move on.
Make sure not to create passcode, Touch ID or Face ID,
and skip signing into our own Apple ID in this process.
Then, when we got to the home screen,
we’ll see the Apple ID has been signed out from our device.
In the last part here,
I’d like to offer you guys a brief guide on how to use the Windows version.
The only difference is the jailbreak.
On Windows, after downloading checkrein,
We will need to insert an empty USB thumb drive.
And then create a bootable flash drive for the jailbreak.
Once done, we will get a jailbreak guide on windows.
So when your are ready, restart the laptop.
As it boots up, press F12 key to enter the boot option.
Then boot it from the U-E-F-I hard drive.
In seconds, we'll see the checkrein jailbreak wizard.
Then everything goes the same as the Mac version.
So once we finished the jailbreak, unplug the usb drive and restart our laptop.
And then remove the activation lock using 4MeKey.
Just like that.
So that’s it.
Hope this video helps you guys.
This is Tenorshare Channel.
See you in the next one.