Welcome to Sage Audio. Today we’re covering How to Make Space in a Mix. But first,
If you have a mix that you need mastered,
send it to us to receive a free mastered sample of it with the link in the description.
Reduce Masking with EQ
If your mix is lacking space, you might have an issue with frequency
masking - the most common cause of this is excessive 200 - 300Hz. That said,
if you reduce this frequency throughout your mix, maybe with low-pass filters where
appropriate or bell filters on other instruments, it’ll definitely help.
I put this one first because it is a really common cause of a clustered mix,
and fortunately, really easy to fix.
Let’s take a listen to before and after these filters are applied.
Alternate Saturation Types
Saturators create both even and odd harmonics, or a mixture of the 2 - but if you add too many
similar saturators, you’ll end up with excessive frequency overlap. For example, if I use tube
saturation on every instrument, odds are the 2nd ordered harmonic is going to reduce space.
I can’t tell you what each saturator adds since they come from different developers,
but it’s a great idea to run a low-frequency sine wave through your saturator, and then
observe the harmonics with a frequency analyzer on the other side. This will
give you a good idea of which saturators can be used without too much overlap.
Let’s listen to a mix with overlapping harmonics, and one with alternated harmonic formations.
If you’re enjoying the video, hit the like button; it helps us bring you more videos
Reduce Compression Usage
Dynamics are incredibly important when trying to give your mix space - use too much compression
and it becomes increasingly difficult to differentiate between various instruments.
To help with this, try more intentional compression - for example,
emphasize transients with a short attack and release times combined with a hard knee.
Or maybe smooth out a vocal with optical compression, while increasing the smack of a
kick with a high ratio, DBX-style compressor. The point being, that if your compressors are creating
unique sounds, you can utilize needed compression while retaining the identity of your instruments.
Let’s listen and notice how we decrease the dynamic range,
but retain the space between signals.
Detect Mode with Kirchhoff EQ
The Kirchhoff EQ has a useful function with which you can attenuate a frequency
range of the signal using another range as its trigger. A great way to increase space
and clarity in your mix is by attenuating 200 - 300Hz, using roughly 3-5kHz as the trigger.
This will reduce masking, increase the perceived dynamic range,
and carve out space amongst more complex instruments. Let’s take a listen to it.
Only a small percentage of people that watch our videos are subscribed, so if
you’re enjoying the video consider subscribing. It’s free and you can always change your mind.
Analyze and Reduce Overlap with Pro-Q3
Although other EQs do this as well, the Pro-Q3 offers an analysis tool with which
you can observe overlap between one signal, and other signals in the mix. For example,
I could observe the overlap between my kick and bass, indicated in red.
From there I can choose which instrument or instruments to attenuate these overlapping
frequencies on - in turn giving each instrument some space. Let’s listen to overlap being reduced.
Try Inverse EQ Trick
Although a little complex, we can use the match function of the Pro-Q3 to separate competing
signals and carve out more room. First I’ll side-chain the competing signal, match the 2,
and then delete extreme bands - then I’ll highlight them all and invert their gain.
Now what would’ve made them more similar is being used to make them more distinct.
Let’s listen and notice how the signals each get some additional space from this process.
Easy Additional Headroom Trick
If you’re trying to create a louder mix or maybe a master, use a linear phase EQ
and high-pass filter to attenuate up to 30Hz. Since the lowest frequencies are so powerful,
they take up a significant amount of headroom, so it’s best to reduce their amplitude.
Since we can barely perceive them, we don’t have to sacrifice too much to
get more space to work with. Let’s listen, but keep in mind the effect will be subtle.
If you're enjoying the channel, use the search box to watch more of our videos.
Be Selective with Upward Compression
Similar to how we need to be selective with downward compression like in chapter 3, we should
be mindful of how much upward compression we use. Although upward compression brings out details,
it’ll reduce the dynamic range and might affect the separation and space between instruments.
Let’s listen to a mix in which all instruments have upward compression, compare it to one in
which only a few have it, and notice how the effect reduces space when used excessively.
Binaural Panning on Support Instruments
Binaural panning utilizes psychoacoustic effects to place a signal within a 360-degree field, as
opposed to the 90-degree field we have access to with traditional panning. If the instrument you’re
working on isn’t absolutely essential to the mix and seems out of place, try binaural panning.
I wouldn’t recommend this on vocals, kick,
bass, or anything you can’t afford to lose if your listener is playing your track on a mono system.
Let’s take a listen and notice how we achieve more space.
Utilize Sample Delay
From our last chapter, we know that moving instruments to a wider stereo field
helps create space - that’s why I enjoy this really simple effect. A sample delay that
delays one channel of a stereo signal can place it anywhere within a 360-degree stereo field.
That said, you don’t need complex stereo placement plugins,
but only your ear and a sample delay plugin to create more space.
Let’s listen to this effect used on instruments that don’t need to be mono,
and notice how we achieve more space and a more interesting mix.
Use Gullfoss EQ on Busses
The Gullfoss EQ dynamically amplifies and attenuates frequencies to reduce masking
and create a balanced sounding instrument, instrument group,
or full mix. I like to use this plugin on my buses to make them more balanced,
in turn creating more space in my mix and an overall more balanced sound.
Let’s listen to this plugin being used on various buses and notice how we can perceive more space.
If you have a mix that you need mastered, send it to us to receive a free mastered sample of it
with the link in the description. Thank you so much for watching.