okay so i had um
it's my car and um the um emblems on the back that's at hyundai where i just touched them and
they fell off i lost one so i have to replace one of them but um what i had originally done is after
i pulled them off i tried the hot glue and i came back the next morning and the um hot glue i guess
um um didn't hold and they fell off um i could have wanted to use hot glue before in the past
and it worked but this time i am going to use um gorilla clear glue which is this stuff here
if you can see that this stuff works on a lot of things
surprisingly it's worked well and i've never really had problems um what i want to do when
you start messing around with this there's like glue that residue around the letters
and you have to get it off so i used some goo gone just to get the glue off around the edges
and then i used some isopropyl alcohol to clean off the glue gun
now the um i didn't take the actual rubbery piecings off portions off because i want to have
a a template where i put the new letters i have really hard trouble aligning letters especially
letters if it was just the one big emblem i might be able to do it well but letters i'll put them
on there crooked i've done it in the past so um i left the material on there which is still sticking
well to the car so hopefully when this new glue attaches it will attach in a consistent manner
um so that's all i have for now i'm gonna um do it and then i'll come back to the
video okay so i got the um letters i had i'm missing one letter which i'm gonna pick up it
wasn't as easy as i thought it was gonna be um i thought the glue which is this gorilla glue
which works on everything i've tried it on so far would um be tacky enough to keep the letters on
without the tape support but i had to put painters tape on there to get it to hold temporarily
it was kind of slick i mean i might have to go back and remove it and
really clean the area more with rubbing alcohol or something i may have some wax
under there for some reason but um i don't know you never know this stuff might work
um the letters i put right on top of the old letters i'm not sure how accurate i was because
each letter has its own horizontal and vertical position
um it probably looked a little crooked but can't do much about that
all right it's been about 20 hours since i used the gorilla glue and glued these emblems back
on let's see if the tape held long enough to keep it from moving around and if there's any
material from the glue sticking on the car that shouldn't be now remember i'm missing one letter
i'll probably get a new letter i'll definitely get a new letter if this doesn't work i'll
just take all the um emblems off and just leave it blank but it looks good so far
it's not like if it wasn't sticking when i was pulling this tape off most likely some of the um
letters would already be coming off right now
but um the gorilla glue that i got i really like it it's never failed me to glue anything
it's not super glue but it acts like super glue and um that's why i like using it
i even used it for um i think my mirror on my car when the mirror fell off but yeah these are on
there good these aren't moving that one's a little crooked but crooked is better than nothing i guess
the eye was i knew it was gonna give me trouble but yep i'll get me a d and i'll be fine
it's on there really well so use some gorilla glue the small bottle that i showed if you're going to
do something like this and i never took off the um old rubbery leftovers from the glue and i just
i cleaned it around with them rubbing alcohol and then if there were stuffs tough stuff still
on there i used um glubigon and then i cleaned it again with the rubbing alcohol i'll probably be um
waxing this so it's really clean but it's pretty it's pretty good shape
as it is the goopy gown did a good job taking off the material that was there
the eye's a little disappointing but overall it came out all right
How to replace car emblems cheaply with glue, does it work