What I want to do in this video is answer an age-old question,
or at least an interesting question to me.
And the question is, let's say I have a ledge here--
I have a ledge or cliff, or maybe
this is a building of some kind.
And let's say it has height, h.
So let's say it has a height of h, right over here.
And what I'm curious about is if I were to either-- Let's
say that this is me over here, so this is me.
If I were to either jump, myself--
that's not recommended for very large h's.
Or If I were to throw something, maybe a rock off of this
ledge, how fast would either myself or that rock
be going right before it hits the ground?
And like all of the other videos we're
doing on projectile motion right now,
we're going to ignore air resistance.
And for small h's and for small velocities,
that's actually reasonable.
Or if the object is very aerodynamic
and is kind of dense, then the air resistance
will matter less.
If it's me kind of belly flopping from a high altitude,
then the air resistance will start to matter a lot.
But for the sake of simplicity, we're going to assume no air.
Or we're not going to take into effect
the effects of air resistance.
Or we could assume that we're doing
this on an Earth-like planet that has no atmosphere.
However you want to do it.
So let's just think about the problem.
And just so you know, some of you might say,
that's not realistic.
But this actually would be realistic for a small h.
If you were to jump off of the roof of a one-story building,
air resistance will not be a major component
in determining your speed if.
It was to be a much larger building, then all of a sudden
it matters.
And I don't recommend you do any of these things.
Those are all very dangerous things.
Much better to do it with a rock.
So that's actually the example we're going to be considering.
So let's just think about this a little bit.
We want to figure out-- So at the top,
right when the thing gets dropped,
right when the rock gets dropped,
you have an initial velocity of 0.
And once again, we're going to use the convention here
that positive velocity means upwards,
or a positive vector means up, a negative vector means down.
So we're going to have an initial velocity over here
of 0.
And then at the bottom we're going
to have some final velocity here that
is going to be a negative number.
So it's going to have some negative value over here.
So this is going to be negative.
This is going to be a negative number right over there.
And we know that the acceleration of gravity
for an object on free fall, an object in free
fall near the surface of the earth.
We know it, and we're going to assume that it's constant.
So our constant acceleration is going
to be negative 9.8 meters per second squared.
So what we're going to do is given an h,
and given that their initial velocity is 0
and that our acceleration is negative 9.8 meters per
squared, we want to figure out what our final velocity is
going to be right before we hit the ground.
We're going to assume that this h is
given in meters, right over here.
And we'll get an answer in meters
per second for that final velocity.
So let's see how we can figure it out.
So we know some basic things.
And the whole point of these is to really show you
that you can always derive these more interesting questions
from very basic things that we know.
So we know that displacement is equal to average velocity times
change in time.
And we know that average velocity--
if we assume acceleration is constant,
which we are doing-- average velocity
is the final velocity plus the initial velocity over 2.
And then our change in time, the amount of elapsed time
that goes by-- this is our change in velocity.
So elapsed time is the same thing.
I write it over here-- is our change in velocity
divided by our acceleration.
And just to make sure you understand this,
it just comes straight from the idea
that acceleration-- or let me write it this way--
that change in velocity is just acceleration times time.
Or I should say, acceleration times change in time.
So if you divide both sides of this equation by acceleration,
you get this right over here.
So that is what our displacement-- Remember,
I want an expression for displacement
in terms of the things we know and the one
thing that we want to find out.
Well, for this example right over here,
we know a couple of things.
Well actually, let me take it step by step.
We know that our initial velocity is 0.
So this first expression for the example we're doing,
the average velocity is going to be our final velocity divided
by 2, since our initial velocity is 0.
Our change in velocity is the same thing
as final velocity minus initial velocity.
And once again, we know that the initial velocity is 0 here.
So our change in velocity is the same thing
as our final velocity.
So once again, this will be times.
Instead of writing change in velocity here,
we could just write our final velocity
because we're starting at 0.
Initial velocity is 0.
So times our final velocity divided by our acceleration.
Final velocity is the same thing as change in velocity
because initial velocity was 0.
And all of this is going to be our displacement.
And now it looks like we have everything
written in things we know.
So if we multiply both sides of this expression
or both sides of this equation by 2 times our acceleration
on that side.
And we multiply the left-hand side
by-- I'll do the same colors-- 2 times our acceleration.
On the left hand side, we get 2 times our acceleration
times our displacement is going to be equal to,
on the right hand side, the 2 cancels out with the 2,
the acceleration cancels out with the acceleration--
it will be equal to the velocity,
our final velocity squared.
Final velocity times final velocity.
And so we can just solve for final velocity here.
So we know our acceleration is negative 9.8 meters
per second squared.
So let me write this over here.
So this is negative 9.8.
So we have 2 times negative 9.8--
let me just multiply that out.
So that's negative 19.6 meters per second squared.
And then what's our displacement going to be?
What's the displacement over the course
of dropping this rock off of this ledge or off of this roof?
So you might be tempted to say that our displacement is h.
But remember, these are vector quantities,
so you want to make sure you get the direction right.
From where the rock started to where it ends, what's it doing?
It's going to go a distance of h,
but it's going to go a distance of h downwards.
And our convention is down is negative.
So in this example, our displacement
from when it leaves your hand to when it hits the ground,
the displacement is going to be equal to negative h.
It's going to travel a distance of h,
but it's going to travel that distance downwards.
And that's why this vector notion is very important here.
Our convention is very important here.
So our displacement over here is going to be negative h meters.
So this is the variable, and this
is the shorthand for meters.
So when you multiply these two things out,
lucky for us these negatives cancel out,
and you get 19.6h meters squared per second squared is equal
to our final velocity squared.
And notice, when you square something
you lose the sign information.
If our final velocity was positive, you square it,
you still get a positive value.
If it was negative and you square it,
you still get a positive value.
But remember, in this example, we're
going to be moving downward.
So we want the negative version of this.
So to really figure out our final velocity,
we take, essentially, the negative square root
of both sides of this equation.
So if we were to take the square root of both sides of this,
you take the square root of that side,
you take the square root of that side, you will get--
and I'll flip them around-- your final velocity, we could say,
is equal to the square root of 19.6h.
And you can even take the square root of the meter squared
per second squared, treat them almost like variables,
even though they're units.
And then outside of the radical sign,
you will get a meters per second.
And the thing I want to be careful here
is if we just take the principal root here,
the principal root here is the positive square root.
But we know that our velocity is going to be downwards here,
because that is our convention.
So we want to make sure we get the negative square root.
So let's try it out with some numbers.
We've essentially solved what we set out
to solve at the beginning of this video,
how fast would we be falling, as a function of the height.
Well, let's try it out with something.
So let's say that the height is-- I don't know,
let's say the height is 5 meters, which
would be probably jumping off of a
or throwing a rock off of a one-story, maybe
a commercial one-story building.
That's about 5 meters, would be about 15 feet.
So yeah, about the roof of a commercial building,
give or take.
So let's turn it on.
And so what do we get?
If we put 5 meters in here, we get 19.6 times 5 gives us 98.
So almost 100.
And then, we want to take the square root of that,
so it's going to be almost 10.
So the square root of 98 gives us roughly 9.9.
And we want the negative square root of that.
in that situation, when the height is 5 meters-- So
if you jump off of a one-story commercial building,
right at the bottom, or if you throw a rock off that, right
at the bottom, right before it hits the ground,
it will have a velocity of negative 9.9 meters per second.
So negative 9.9 meters per second.
I'll leave it up to you, as an exercise,
to figure out how fast this is either kilometers
per hour or miles per hour because it's pretty fast.
It's not something you's want to do.
And this is just off of a one-story building.
But you can usually figure this out.
You could use this for, really, any height as
long as we're reasonably close to the surface of the earth
and you ignore the effects of air resistance.
At really high heights, especially if the object is not
that aerodynamic, then air resistance
will start to matter a lot.