Hi, there I'm Nils.
And I'm excited that we just installed this new TV wall Mount for our TV to make
it look really nice. But what I don't like is all these ugly cords hanging down.
So I'm going to show you how with about $10, you can take care of that.
Getting rid of all the wires here and making a mounted TV,
seemingly float on the wall and have all the connections underneath let's go
ahead and get started.
So here are the tools that we're going to need to go ahead and get started.
We're just going to use a tape measure, a stud finder. Now this is optional,
but it will make life easier. Um,
some sort of a blade to go ahead and cut through the drywall.
And then this is the secret here. We've got these, um, CE tech,
low voltage recessed cable plates.
Now these guys are actually about $4.95 a piece at Home Depot or Lowe's,
and it's just a,
it's just an open outlet type of a situation where we can feed wires in
through the box.
They can come down through the wall and then we receive them on another end.
So we need a pair of these. And then if you want to make life easier,
you can also use a drywall saw and a drill to get things
started. So those are optional, but those are nice to have if you want to.
Okay.
The first thing we're going to want to do is to pull this TV back and gives
ourselves some space. If you have a TV that has a,
an arm that allows you to move it around and go ahead and just move it out of
the way. If not,
then you may want to remove the TV from the wall to give yourself some space to
work. Ideally,
we're going to be placing this plate in an area where it's concealed by the TV.
So you can't see it at all.
That's the whole idea is just to kind of hide everything. So I know that, um,
based on where this TV is typically going to be,
then I'm going to want to put it
right about here or somewhere in this,
in this area back here so that the power cord and all the other chords can go
right back there and down into it. So I'm gonna move this out of the way.
In fact, I'll just mark that,
that general area is that we want to put it right back here somewhere.
Okay.
Pull that TV out. So this is about the area where we want to put it,
but we want to check for studs.
We don't want to be dealing with studs in this case.
We just want the dry wall itself.
So we'll use the stud finder here to take a look.
Okay. Should find one right over here. It does good.
It's not finding one in here.
It does find some sort of power here,
though I find that this stud finder tends to think everything's lit up.
So I think we're okay. Um, but in this section over here,
I think we're going to be all right.
So let's go ahead and put it right about where we wanted it.
And we'll take a look. Now, a couple of ways to do this. Um, again,
you can use a, a blade like utility knife to go ahead and a square in here.
You can use a drywall saw if you have one.
And then there is also a little template that comes with the, um,
the plates here that we can use. So we'll go ahead and use this template.
We'll trace it out
and that'll be our hole,
so there's our square. And we'll go ahead and start to cut in this.
I'm just going to go ahead and use the utility knife for this.
Okay.
So we're going to go ahead and cut in and we'll just start by scoring our lines
here.
All right. Once we've got that should be able to.
Kind of pop this piece out. Here we go.
And just, cause I don't like having stuff floating around in the walls.
I'm going to try to grab that piece.
There we go.
Well, this next part should be pretty simple.
We're going to take this guy here and the way this works,
these little flaps extend out. And as you tighten the screw down,
it's going to pull the flaps in and snug up against the wall and hold the thing
in place. So when your flaps in
on both sides, there you go.
Okay. And it goes like that. And then we just need to tighten this thing down.
[Inaudible].
Now when you start to get some resistance there ,then you know,
it's just check it and make sure it's snug. Okay. And it looks good there.
And again,
we're making sure that the opening is going downward to connect with our
receiving end, which will be pointing upward. So there's one part of it.
Okay.
So I've gone ahead and now cut out the bottom plate where I'm going to receive
the wires.
And I went ahead and fed the wires through the top and I'm just going to pull
them out. Okay.
So then I'm going to feed all of these through receptacle.
Okay.
Make sure my little flappers are in there.
Okay.
All right. So now that's in there pretty snug. I've got my wires out.
I'm ready to hook them up and then we'll see how this thing looks. Okay.
Check it out.
So now we've got our TV all set up wall Mount in place and no wires to be seen
for about $10 of,