Hi everyone this is geRAMicc85, and today I want to show you how I do a pre-alignment
for my truck.
Because I put in some new steering parts and as you know you always have to get a new alignment
when you put in new parts.
I just put them in and now I am doing a pre-alignment so that I can actually drive around safely.
What I did is, I put a small rope that you see here in the middle of the tire.
It runs from the rear from the one side up to the front.
To the other side, all around the car to the rear again.
This way I can go around and check whether there is a gap, like here.
So what I am going to do now is, I am going to loosen up the adjusting sleeve on the steering
tie rods.
And then that way I will pull in or out the tire.
Whenever I did steering repairs I had to do this, and it always worked out fine.
This is just one idea to do a simple alignment at home, in order to get to the alignment
shop safely basically.
That's it, I thank you very much for watching and I hope this helps you out.
If so please press like.
For more videos on my dodge ram 1500 you can go to my channel and subscribe if you like.
I appreciate every subscriber!
I wish you a good day, geRAMicc85 signing out.