Hi everyone, welcome back to geardo
Today we will show you how to replace the LCD & Touch Assembly on the iPad Pro 10.5.
Before Starting, we need to have the right tools to proceed with the repair, which You
can find in the description.
Proper heating requires for iPad screen removal from the body.
For this, we use a heating pad designed for tables and mobile phones.
On iPad devices, make sure to heat the front side of the iPad.
Select the Tablet heating option and leave it till the heating completes.
Alternatively, you can use a heat gun or something similar.
Once the heating has completed, use a suction cup on the sides to lift the front screen.
In between, Insert few Plastic pickers or card pry tools and cut the adhesive around.
Be gentle while pulling; there are flex cables attached to the logic board.
Next, lift the lcd screen to 45% from top to bottom, and then remove the shield by undoing
two screws and disconnect four connector plugs.
Now, the LCD unit can leave the body.
Next, remove the home button and flex from the broken screen and then place it on the
new screen.
it is good to test the new screen before adding glue.
Next, Place the New LCD & touch assembly unit in the body by securing four connector plugs.
Make sure the connections are secured, and then add the shield by inserting two screws.
Next, Before clamping, it is good to verify the screen functionality and then secure the
screen to the body by adding adhesive.
If your replacement part comes without adhesive, you could use b7000 or double-sided adhesive.
Place the bottom section first, follow the top, and click sides and the bottom simultaneously.
Just make sure to put pressure on the frame sides and verify that the home button sits
and clicks precisely.
Next, we are using screen bonding clips to tighten the screen to the frame.
If not, you can use rubber bands and leave them for some time.
Hope you have enjoyed the screen Repair guide.
Let us know if you have any questions; please like, share, and comment on our videos.
Do not forget to hit the subscribe button.
Step by step Camera Glass lens replacement on Xiaomi Redmi Note 10 mobile phone.
Using this repair guide, you will replace a broken, cracked, or damaged camera lens
glass with a new unit.
LCD Screen display & Housing restoration on iPad Pro 9.7 Tablet.
This particular device has severed damages to the screen and housing.
The only method is to restore the machine by placing all Internal parts in a new back
housing cover with a new LCD Screen.
Using this guide, you will repair and replace the following parts on iPad Pro 9.7.
Power button & flex, Volume Button & flex, Headphone jack, Antennas, Speakers, front
camera, back camera, Battery, and LCD Assembly on a broken, damaged iPad Pro 9.7 tablet.
Please note, this repair will take 1-2 hours and need a lot of patience.
Manjula How are you?
it was nice to talk to you yesterday.
"Jaliya" is here; please use this email address for future communications.
I am attaching the company documents as you have requested.
Please go through it and let me know the next step, and I will contact you next week while
you are in Australia.