(heavy metal theme music)
- [Lucky] Okay, so we're all done here.
I cut the entire transmission tunnel out,
and part of the driveshaft tunnel.
I fabricated some another tunnel
out of some metal that we had laying around.
I had to do some minor modifications here and there.
I tacked it all together.
I tried to, shall we say, hack
the car as little as possible.
I used some seam sealer to seal it up.
We're going to put probably some carpet in here.
I want to build a reinforcement to hold the shifter.
Here's what I'm going to do. I'm going to install
the transmission shifter.
That's a good spot.
And just make sure that I can push
the reverse lockout
and go all the way to Park.
So, I'm thinking that that's a good spot
for it right there.
(drilling metal)
I'm getting ready to make
a shift mount...
...slash cup holder.
Priorities are important when fabricating.
(hissing)
(metal clanks on the floor)
(zapping)
(drilling)
I did modify the bracket
and make it a little bit wider
because every car needs a couple cup holders,
so there'll be couple cup holders right there.
It has reverse lockout.
It fits right underneath the dash
so you can to any position,
so I think we're good.
- [Tony] I just bought a four inch exhaust kit
for a Dodge RAM MBRP.
I'm just trying to figure out how to fit
a four inch pipe between the start of the frame
and the firewall here.
As long as I got it just right
I should be able to fit the exhaust in there.
I'm going to cheat this cut on the bend
a little bit to make it as tight as we can get it.
Then I'm going to weld on a V-band flange
I'm going to have to scavenge off the downpipe
that came with our turbo kit right here.
(metal grinding)
Cool.
This thing will live see another day.
Welded on to this 90.
This will be the start of our downpipe.
(zapping)
I can just cut it here and put a little kink on it
and we can start that transition back.
I can mate that up to this,
and then we can do just another bend after it.
(zapping)
I love it.
(rock music)
Alright. Want to crush it?
- [Lucky] Going down to party town.
- [Tony] Is it crushing?
Oh yeah. A bit more.
Stop.
Go up.
This looks like it was made for it, dude.
(rock music)
I've got the exhaust all done.
Charge pipes are there, we can finally fire this thing up.
As you noticed, there are still quite a few
small things to do, but we're ready to go.
- Yes.
- Let's make some smoke.
- 'kay.
Cover me, I'm going in.
- [Tony] Hold on.
Let me prime this thing.
Alright, try it.
(starter cranks, engine starts)
Nice.
(motor revs twice)
Nice.
(motor shuts off)
How's it feel in there?
- I'm not going to lie, I'm a little scared.
- It fired right up.
- It did.
- [Tony] It sounds just as good
it did at the dyno.
We've got a couple things left to do
then we're going to take it out
and have some fun.
(guitar lick)