Hi everyone, welcome back to geardo.
Today, we will show you how to replace the LCD screen on the New iPhone SE 2022, also
known as iPhone SE 3.
Before Starting, we need to have the right tools to proceed with the repair, which You
can find in the description.
First, Turn off the phone and undo two bottom screws using a Pentalobe Screwdriver.
Next, To take out the screen, first apply heat to soften the glue on the screen.
For this, we are using a heating pad.
Once the heating has done, use a suction cup or something similar to lift the front assembly.
Next, use a plastic card pry tool for separating and loosening rubber gaskets on the frame.
Carefully workaround on the edges, and Keep in mind, do not put too much force to lift
the screen, it might damage internal flex cables.
Next, Remove four screws, and take out the Shield.
Next, on the top right, undo three screws, and remove the protector shield.
Take out both shields, and next, Undo the battery, touch, and LCD connectors.
And then, to Free the screen, disconnect the earpiece assembly connector from the board.
When performing the LCD replacement, you need to transfer the earpiece, home button flex,
and front camera assembly module to the new LCD assembly.
Next, undo three screws to take out the earpiece bracket.
Next, undo two screws to take out the earpiece unit.
Be gentle and move cables aside while pulling out the module.
Next, pull out the front camera flex by applying some heat.
Gently pry the cable.
Next, remove the home button & flex from the screen.
First, remove four screws and take out the protector shield.
Then unplug the connector, and by using a tweezer, gently
lift it and pull the home button and flex through
the opening.
Next, connect the new screen to the body for testing.
Secure the lcd & touch plugs and then the battery.
Turn on
the
device for testing.
Once the testing has passed, power off and disconnect all connectors.
Next, on the new screen, start placing removed parts.
First, place the home button flex through the opening, and secure the connector.
Next, place the home button bracket by adding four screws.
Next, place the front camera assembly and earpiece unit on the screen.
Be gentle with the cable and ensure the placement.
Next, place
the bracket by adding four screws and secure the earpiece by adding two screws.
Next, add the pre-cut water seal adhesive into the frame.
Please note this tape will not completely protect
the device against the liquid.
Next, clamp the screen to the body.
First, connect the front camera assembly plug and connect the lcd & touch and battery connectors.
Next, turn on the device for verification.
Next, secure the lcd bracket by adding four screws.
Next, secure the upper bracket by adding two screws.
Next, test the screen and remove the protective tape to clamp the screen.
Click in the top section first, then click the sides and the bottom simultaneously.
Just make sure to put pressure on the frame sides.
Next, secure two bottom screws.
A quick note, It is good to check the ear speaker and sensor
response by a test call.
Hope you have enjoyed the iPhone SE 3 2022 Screen Repair guide.
Let us know if you have any queries; please like, share, and comment on our videos.
DO not forget to hit the subscribe button.