This video is supported by Brilliant.
On Christmas day 2021, the James Webb telescope finally launched on its long journey to explore
our Universe.
After years of delays and billions of dollars spent, the telescope was now on its way to
lagrange point 2, an area in space 1.5 million km away from Earth.
The telescope took 30 days to get there, but before James Webb ever left the ground, it
went through a journey that was perhaps even more extraordinary.
The story of James Webb is pretty crazy.
In fact, it’s almost a miracle that the telescope ever made it into space at all.
Development of the telescope began all the way back in 1996 - and the launch was expected
to take place in 2007.
Between then and its eventual launch in 2021, the telescope went through a major redesign
in 2005, suffered a ripped sunshield, almost got canceled by the US congress and even survived
the COVID pandemic.
All of this meant that the budget went from 500 million dollars to 10 billion dollars,
by the time it was complete.
Because of this, NASA now had the world's most precious and valuable object in its hands,
and it had to be sent 9,000km around the world to the launch site.
But before NASA even considered how it would traverse this complicated route, it had to
find a way to package this rather valuable object.
Cardboard box technology had improved greatly over the last decade, but Webb needed something
a little stronger.
And so NASA built a custom shipping container called Stars, which would protect the telescope
during its journey and act as a mobile clean room.
The instruments on Webb are so sensitive that even a speck of dust or a fingerprint could
cause serious damage to them.
This container was so clean that no more than 100 particles - much smaller than the width
of a human hair - could be present inside the container.
Each nut and bolt on the container was inspected with ultraviolet light to reveal any unwanted
contaminants.
Only once it was perfectly clean could Webb be loaded into the container.
This process took nearly a month, as the telescope had to be carefully folded into its launch
configuration like a giant piece of origami.
But before James Webb was even assembled, the telescope's mirror also had to go through
a crazy journey.
The 18 giant hexagonal segments that form Webb’s mirror are made from a metal called
Beryllium.
This metal was chosen to keep the overall mass of the mirror extremely low while still
retaining lots of strength.
Despite being about 3 times larger than Hubble’s mirror, Webb’s mirror only had a fraction
of the mass.
But in order to construct these perfectly polished mirror segments, they had to make
14 stops at 11 locations all across the US.
The first journey started in the mountains of Utah where the Beryllium powder was mined
and shipped to Ohio, where it was purified and turned into individual mirror blanks.
Then, the blanks were sent to Alabama where each one was machined into a honeycomb structure
to reduce mass.
The next destination was California, where the mirrors were polished to the exact shape,
perhaps the most crucial part of the process.
After this, the segments made several trips across the country, undergoing years of testing
to check that they were polished correctly.
On the 9th journey, the mirror segments traveled to New Jersey, where gold was evaporated over
them inside of a vacuum chamber to form a very thin coating.
After some more testing, the mirror segments ended up in Maryland where they were assembled
together and attached to the main instrument module.
After years of even more testing, the telescope arrived in Redondo Beach, where it was finally
attached to its enormous sunshield. 17 years after the first mirror segment had been produced,
James Webb was now ready to make its last journey on Earth.
The first leg of the trip involved getting from the Northrop Grumman facility in Redondo
Beach to a port in Seal Beach where a ship would be waiting to take the telescope to
French Guiana.
Although this journey was just 41km, the transport team only had one chance to make it happen.
Before Webb hit the road, they used satellite images to inspect every single part of the
route to find all of the possible hazards that would get in their way.
Every pothole had to be filled and many traffic lights had to be lifted in order for the container
to fit underneath.
To reduce the impact to the public and for the safety of Webb, the telescope traveled
during the night.
However, this meant that it just had a 6 hour window to make its 41km journey.
This sounds easy, but since the container was so big and heavy, it could only travel
at around 8 km/h.
And so, just in case any problems did occur, NASA had selected various safe havens along
the way where Webb could take shelter and receive maintenance.
With Webb ready to go, it left the factory at midnight along with a convoy of support
vehicles and police escorts.
The crazy thing is that no roads were fully closed down, and regular traffic had to be
carefully escorted around the telescope as it moved down the highway.
Several trucks carrying pressurized bottles of dry air followed Webb, constantly keeping
its container topped up with the cleanest air.
Eventually, the telescope arrived at the port in the early hours of the morning.
Webb had successfully completed its first leg of the journey, but this was only the
beginning.
Webb was then loaded onto a French cargo ship, a process that involved first driving the
container onto a barge and rotating it to face the cargo ship's loading ramp.
The container had to be kept almost exactly level throughout the journey.
So to avoid any rough seas, NASA worked with the crew of the ship and planned a route that
would take them through the calmest parts of the ocean.
This journey took 16 days in total, passing through the Panama Canal and sailing up the
Kourou River to reach its destination at the Guiana Space Center.
All in all, the James Webb telescope took about 13 years to build - from the very first
pieces being put together in 2004, to having a finished telescope in 2017.
It wasn’t just a NASA project.
Space partners from all over the world contributed parts to the telescope even before it made
its journey to the launch pad.
And now that the telescope is finally where it needs to be, we can look forward to the
incredible discoveries it will make about our universe and the amazing pictures it will
reveal.
If you want to make your own incredible discoveries, check out Brilliant.org - an online learning
platform that helps you learn everything STEM related in an interactive way.
Brilliant is the best way to learn stuff, since it teaches you to think critically about
problems and truly understand them.
You can learn at your own pace and at any time, through the many interactive courses
available on Brilliant.
If you have any interest in things like space, science, math and engineering - then Brilliant
has you covered.
Brilliant has a wide range of interactive courses, designed to give you a deep understanding
of how and why things work - so you can apply them to everyday life.
To get started for free, visit brilliant.org/primalspace or click the link in the description.
The first 200 of you will also get 20% off Brilliant's annual premium subscription.
If you’d like to support the channel even more, consider becoming a Patron where you
can give your input on each video and get exclusive access to our Discord server.
Thank you very much for watching and I’ll see you in the next video.