[Applause]
[Music]
altiverb process how to connect to web
server solution 1 Ethernet connection
with ipv6 using a simple Ethernet cable
connect the drive to your computer pay
attention
Ethernet port is on the top go to the
communication menu and check that IP
mode Ethernet embedded is set to DHCP
set a device name for the drive
[Music]
from the main menu go to my preferences
[Music]
web-surfer
[Music]
webserver default password read and
write down the default web server
password paying close attention to upper
and lowercase letters
deactivate the firewall as it could
interfere with the connection to the web
server caution deactivation of the
firewall is under your responsibility to
access the local connection properties
go to control panel networks and sharing
Center change adapter settings local
area connection properties and check
that Internet Protocol version 6 is
enabled using network explorer on your
computer launch a network device
discovery the drive will appear
automatically
[Music]
enter the username admin and the default
web server password change the current
password and confirm when the drive is
connected for the first time you must
use the default password
[Music]
the default password needs to be changed
to secure your account please respect
the password policies
[Music]
the connection to the web server is
successful solution to Wi-Fi connection
with the wifer and ipv4 from the main
menu go to communication communication
parameters embedded Ethernet
configuration set IP mode to fixed and
enter the IP address and mask
[Music]
switch off and switch on the main power
of the drive to save the IP address into
the drive open the wiper cover and write
down the wiper address and password
connect the ethernet cable from the
wiper to the Ethernet port drive switch
on the Y fur wait for the green LED
[Music]
open the list of networks and validate
the address of the wiper SSID
enter the Y for security key written
down previously to authorize the
connection to the wifer to get to the
local area connection properties go to
control panel networks and sharing
center change adapter settings local
area connection properties and check
that the Internet Protocol version 4 is
enabled
[Music]
enter and attribute to the computer and
address and subnet mask
[Music]
open Windows Explorer and refresh the
list of networks available the drives
icon will appear
[Music]
enter the username and password
previously saved
[Music]
the connection to the web server is
successful
thank you for watching for more
information please visit our website
[Applause]
[Music]