get rid of instructions why because you don't need them you've got IKEAHUNK
After you're finished unboxing sorting all of
the pieces out you're going to start
within certain four wooden dowels into
the three pieces seen here to medium
pieces on with the one small piece
you will be taking four metal screws and
certain them into the four holes on the
two larger pieces which will make up the
sides of the bookcase
when you have finished screwing these
into place take the two medium pieces
that have the four wooden dowels in them
and insert the tube cam locknuts on
each piece
now take each piece insert into the side piece with the metal
screws attach both ends and turn the cam
locknuts to the right to secure
at the same time take the small piece and insert so
that the exposed wood is facing outwards
then repeat these steps for the other
side piece
now you are ready to hammer four nails into the backdrop
flip the bookcase onto its front
with the exposed wood facing you
hammer all four nails into the
straight edge at the bottom of bookcase
flip the bookcase so it is standing
upright for the final step which will be
placing the other two shelves inside
the four metal bracket inserts and
choose two spots where you would like
the shells make sure the two brackets
for each shelf are placed on holes that
are the same height once the metal
brackets are in place gently slide both
shelves in on a bit of an angle and
press down until flush with the brackets