okay welcome back to my youtube channel Am Prince and today I'm going to show you how
to show you how to solve your E48-32 Dstv problems
whenever this notification pop up on your dstv screen. E48-32, there's no signal
this may be due to bad weather or a faulty connection with the installation
so whenever this notification pop up the first thing you need to do, is to
check your Cable. your signal cable at the back of your Dstv decoder
you need to check it, if it has been loosed. so you can remove it and fix it back.
into into the LNB port, at the back of the decoder
to make sure that your cable has been well fixed.
most of the time the decoder will freeze. So you can reboot the decoder.
so here's the signal quality. most of the time when your signal quality
below 50 maybe 40% here, it will not work.
so you are going to experience that notification on your screen. so whenever you see that you are having signal quality which is below 50%,
then you can go ahead to point the problem to your dish outside your house
so either you can go there to pan it or you can call an installer
to do it for you. whenever you come here and then you see nothing over here
maybe it will be like this
Dstv have been well organized
when you are living in this listed countries over here, Botswana Malawi Mozambique Namibia
South Africa Swaziland Zambia and Zimbabwe you are going to choose this satellite
then when you come to this page, you move it down to manual setup and then press
OK. so you come here the LNB type you change it to universal' most of
the times it will be like this so you change it to universal
-