I'm trying to get more organized in my big
garage workshop. Right now I've got my
pliers and screwdrivers and such in drawers
which is a bit chaotic and hard to get at.
So, I'm gonna make some tool holder to
put them on this piece of plywood behind
my workbench. Most of the pliers, I can just
hang those over an edge of a piece of wood,
like that.
Now I need to mount this about this far
from the wall.
I think I'll put it right about here.
Next thing I got to make something for my
screwdrivers and I'll make that out of this
chunk of maple.
Next I need a place for my chisels.
Think a hole about this size with a slot is ideal.
And I think I need about...
3 and a half centimeters for a chisel.
On the right side I can just mount it by putting
a screw behind one of the chisels.
But on the left side, I have just the holes
for these small chisels so I'm gonna try to
drill a pocket hole, like this.
Next I want to make something to hold
these drill indexes against the wall.
And I figured easiest would be to make a shelf.
So this will be the shelf and a ledge in front.
The things go on here and to support the shelf,
I'm just gonna have a thing on that in the back,
and screw it against the wall.
While I was waiting for the glue to dry,
I cut this little block, which is designed
to hold this square.
Aaahhh. I'm so sick of this thing coming off.
I drilled a hole in it
and now I'm just gonna screw it on.
I still have a lot more tool holders left to build.
But I think this is as much as I want to cover
in 1 video.